McIntoshMA-6600McIntosh MA-6600Beautiful, pristine McIntosh MA-6600, integrated solid state amplifier.  This has been very sparingly used during its lifetime.  It comes with original box, packing material, owners manual, and opt...3500.00

McIntosh MA-6600 [Expired]


no longer for sale

Beautiful, pristine McIntosh MA-6600, integrated solid state amplifier.  This has been very sparingly used during its lifetime.  It comes with original box, packing material, owners manual, and optional FM tuner module that plugs into the back of the amplifier and allows for the selection of FM stations.  This unit was purchased by me approximately 18 months ago and used sparingly.  It sounds beautiful and is being sold only because I am preparing to go overseas for an extended period and rather than let this sit in storage, it is being offered for sale so others can enjoy the beautiful music it makes.
Specifications from the McIntosh owners manual follow.  Note, please, this is a heavy beast.  It weighs almost 100 pounds or 45Kg in the box.  Shipping to anywhere in the 48 states is a flat $100.  Shipping to AK, HI, Canada or elsewhere will be at cost as calculated by UPS or another suitable carrier who will get this beautiful integrated amp to you in the condition it leaves me.

McIntosh MA-6600 Specifications

Power Output

200 watts is the minimum sine wave continuous aver- age power output per channel, both channels operating

Output Load Impedance

2, 4 or 8 ohms

Rated Power Band

20Hz to 20,000Hz

Total Harmonic Distortion

0.005% maximum with both channels operating from 250 milliwatts to rated power, 20Hz to 20,000Hz

Dynamic Headroom

2.0dB

Frequency Response

+0, -0.5dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 100,000Hz

Preamplifier Output 1 and 2 (for rated input)

1.4V unbalanced (8V Maximun)

Sensitivity (for rated output)

High Level, 250mV unbalanced, 500mV balanced Phono, 2.5 mV
Power Amp In, 1.4V

Signal To Noise Ratio (A-Weighted)

High Level, 92dB below rated output Phono, 84dB below 5mV input
Power Amplifier, 115 below rated output

Intermodulation Distortion

0.005% maximum, if the instantaneous peak power is 400 watts or less per channel with both channels oper- ating for any combination of frequencies from 20Hz to 20,000Hz

Wide Band Damping Factor

Greater than 40

Input Impedance

High Level, 20K ohms Phono, 47K ohms; 65pF Power Amp In, 10K ohms

Maximum Input Signal

High Level, 8V unbalanced, 16V balanced Phono, 80mV
Power Amplifier In, 16V

Preamplifier Output Impedance

220 ohms

Power Guard

Less than 2% THD with up to 16dB overdrive at 1,000Hz

Voltage Gain

High Level to Rec Output: 0dB High Level to Output 1 and 2: 15dB Phono to Rec Output: 40dB
Phono to Output 1 and 2: 55dB Power Amplifier: 29dB

Tone Controls

Bass Control ±12dB (1dB steps) @ 30Hz Treble Control ±12dB (1dB steps) @ 10,000Hz

Power Requirements

100 Volts, 50/60Hz at 5.2 amps 110 Volts, 50/60Hz at 4.8 amps 120 Volts, 50/60Hz at 4.4 amps 220 Volts, 50/60Hz at 2.45 amps 230 Volts, 50/60Hz at 2.35 amps 240 Volts, 50/60Hz at 2.25 amps Standby: Less than 1 watt

Note: Refer to the rear panel of the MA6600 for the cor- rect voltage.

Overall Dimensions

Width is 17-1/2 inches (44.45cm)
Height is 7-5/8 inches (19.37cm) including feet Depth is 22 inches (55.88cm) including the Front Panel, Knobs and Cables

Weight

75 pounds (34.1 kg) net, 93 pounds (42.3 kg) in ship- ping carton

Shipping Carton Dimensions

Width is 29-1/2 inches (74.93cm) Depth is 29 inches (73.66cm) Height is 17 inches (43.18cm)

Seller Information

subway228 

Last 12 months
All-time33100.0%

Member since December 2009

Items from this seller