Bully Sound Company BSC-100M Monaural Class A Amplifier
Listed · 560 Views
This listing has ended.
Listings Similar to Bully Sound Company
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Contact seller after sale to pay viaVISA/Mastercard, American Express, Discover, Certified check or Wire Transfer | |
Ships from | Libertyville, IL, 60048 |
Ships to | Worldwide |
Package dimensions | 25.0" × 21.0" × 16.0" (86.0 lbs.) 25.0" × 21.0" × 16.0" (86.0 lbs.) |
Shipping carrier | FedEx |
Shipping cost | Log in to see price |
Original accessories | Box |
Average | Research Pricing |
BSC-100m Monaural Class A Amplifier
The amplifiers are in Good to Very Good condition. There are some small abrasions above the ECO switches, which may have come from the factory that way (as the same can be seen on the factory website photos).The BSC-100m doubles its 8 ohm rated output power into 4, 2 and 1 ohm respectively producing 800 watts continuously with a maximum continuous output of over 1,200 watts. A second transformer is provided for the soft turn-on and other low level circuits to allow the amplifier to be activated either by a 12 volt trigger source or via the front panel switch. The BSC-100m draws less than 2 watts in standby mode. Critical audio signals are preserved using discrete, complimentary and DC coupled input circuits. Signal paths are kept short and pass through the least amount of circuitry required to obtain the desired result. All the components meet or exceed military standards and are over specified to promote long life expectancy. The output stage is comprised of eight 230V, 17A, 200W output devices coupled to 4 massive heatsink towers optimized to disperse the heat of the 100 watts pure Class A power over a wide cross sectional area effectively reducing the overall chassis temperature. Easily accessed from the front panel rotary switch, the BSC-100m offers the user an option to quickly reduce Class A amplifier bias to a half power 50W class A mode and further to a very low power ECO mode
BSC-100m Specifications
Output Power:100 W into 8 Ω, 200 W into 4 Ω, 400 W into 2 Ω, 800 W into 1 Ω (under ideal power conditions)Output Impedance:< 0.15 Ω at 20 Hz to 30 kHzGain:26.10 dBInput Impedance:48 K balanced via XLR connector, 20 K single-ended via RCA connectorInput Sensitivity:1.40 V RMS balanced or single-endedFrequency Response:20 Hz to 20 kHz +/- 0.25 dBTotal Harmonic Distortion:< 0.07% at 20 Hz to 1 kHz, < 0.60% at 10 K, < 1.50% at 20 K, all referenced to 100 W 8 Ω 2.83 VSignal-to-Noise:> 93.50 dB unweighted, > 96.50 dB A-weighted, all referenced to 100 W 8 Ω 2.83 VPower Consumption:Stand by Mode: < 2 W, Idle: 500 W, Maximum: 1,300 WInputs:1 single-ended via RCA connector, 1 balanced via XLR connectorOutputs:1 pair custom designed gold plated binding posts 0.25 in (6.40 mm) spade terminal widthDimensions:16.50 in (W) x 9.75 in (H) x 18.25 in (D)or 420.00 mm (W) x 248.00 (H) x 464.00 mm (D)Weights:unit weight: 80.00 lbs (36.29 kg)
shipping weight in carton: 86.00 lbs (39.01 kg)
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.