PARASOUNDParasound Halo Integrated - 2.1 Channel IntegratedusedParasound Halo Integrated - 2.1 Channel Integrated with DAC (Black)Very Good Condition, One Owner, Purchased from Audio Advisor 02/2015 Pre-Amp & DAC Fetures & Specs: Latest generation ESS Sabre32 Reference DAC (ES9018K2M) Asynchronous USB 2.0 supports...1700.00

Parasound Halo Integrated - 2.1 Channel Integrated with DAC (Black)

Listing ID: lis86f16 Classified 
 Listed  · 122 Views

0 Watchers

Items from this seller

Time Left: Listing Sold

This listing has ended.

Condition
8/10
Payment methods
Ships fromFORT WORTH, TX, 76177
Ships toUnited States
Package dimensions23.0" × 21.0" × 13.0" (42.0 lbs.)
Shipping carrierFedEx
Shipping costFree
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

Very Good Condition, One Owner, Purchased from Audio Advisor 02/2015 Pre-Amp & DAC Fetures & Specs:
Latest generation ESS Sabre32 Reference DAC (ES9018K2M)
Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD Windows USB drivers for ASIO & WASAPI - Download here Mac OS does not require any drivers Coax and optical accept PCM up to 192kHz/24-bit Analog bass management with high & low pass crossovers Home theater bypass input for surround sound integration Front panel Subwoofer level control Dedicated high current headphone amplifier (TI TPA6120) Phono for MM & MC with 100 Ω or 47k Ω load Front panel Aux input with automatic +12 dB gain stage 5 pairs RCA line level Analog inputs 1 pair XLR balanced Analog input Balanced XLR and RCA left and right preamp outputs 1 balanced XLR and 2 RCA subwoofer outputs Bass & treble controls with relay bypass from remote or front panel Rear panel IR input and IR loop output jacks 12 Volt input and output to triggers Back-lit remote control with discrete buttons 0.5w standby power consumption meets Energy Star & EU specs
Power Amp Features
160 Watts x 2 @ 8 Ohms (RMS, both channels driven) 240 Watts x 2 @ 4 Ohms (RMS, both channels driven) Power amp circuit topology designed by legendary John Curl Direct amplifier input to bypass preamp section High bias class A/AB operation Oversized shielded toroid power transformer Dual-mono power supply and power amplifier 40,000uF power supply filter capacitance Matched JFET input stages and MOSFET driver stages 12 high voltage/high current bipolar output transistors Heavy-duty 24k gold-plated 5-way speaker binding posts Over temp and short circuit relay protection
Power Output - Both channels driven  (0.05% THD, RMS, 20 Hz - 20 kHz)  160 watts x 2 @ 8 Ω  240 watts x 2 @ 4 Ω  Power Output - Both channels driven  (0.9% THD, RMS, 20 Hz - 20 kHz)  180 watts x 2 @ 8 Ω  270 watts x 2 @ 4 Ω  Current Capacity  45 amps peak per channel  Frequency Response  10 Hz - 100 kHz, +0/-3 dB  Total Harmonic Distortion (THD)  < 0.01 %, average listening levels  < 0.05 %, 160 watts x 2 @ 8 Ω  Interchannel Crosstalk  > 50 dB at 20 kHz  > 70 dB at 1 kHz  Signal to Noise Ratio - IHF A-weighted  Line in: - 103 dB (input shorted)  Digital in: - 106 dB  Amplifier Damping Factor  > 800 at 20 Hz  Preamp Stage Input Sensitivity  300 mV in for 1 V at Pre Out jacks  Total Preamp Stage Gain: 10 dB  Max Output Unbalanced: 7 V  Max Output Balanced: 9 V  Power Amplifier Stage Sensitivity  1 V at Bypass/Amp In for 28 V at Speaker Out  Total Amp Stage Gain: 28 dB  Phono Stage Sensitivity / Input Impedance  MM: 35 dB / 47 k Ω  MC: 52 dB / 47 k Ω or 100 Ω  High & Low Pass Crossover Slopes  12 dB per octave  Supported DAC Sampling Rates  USB: up to 384 kHz / 32-bit PCM  DSD Native: DSD 64, DSD 128, DSD 256  DSD over PCM (DoP) at 384 kHz  Coax/Opt: up to 192 kHz / 24-bit PCM  Digital to Analog Converter  ESS Sabre32 Reference ES9018K2M  384 kHz / 32-bit  USB 2.0 Controller  VIA VT1731, 384 kHz / 32-bit  Headphone Amplifier  Texas Instruments TPA6120A  Output Impedance 10 ohms  XLR Pin Identification  1 = Ground (Shield)  2 = Positive  3 = Negative (Return)  Input Impedance  Unbalanced: 24 k Ω  Balanced: 100 k Ω per leg  Output Impedance  Unbalanced: 100 Ω  Balanced: 470 Ω per leg  Dimensions  Width: 17-1/4" (437 mm)  Depth: 16-1/4" (413 mm)  Depth, with cables 17-1/4" (437 mm)  Height, with feet: 5-7/8" (150 mm)  Height, without feet: 5-1/4" (133 mm), 3U  Net Weight  33 lb. (15 kg)  Shipping Weight  45 lb. (20.4 kg)  Power Requirement  Standby: 0.5 watts  Idling power: 70 watts  Maximum: 750 watts  110-125 VAC 60 Hz or 220-250 VAC 50 Hz  AC mains voltage is set on rear

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Item can be returned within 3 days of receipt.

General Terms

Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.

Refunds

Buyer will receive a full refund in the original payment method less any shipping charges.