Rotel RX 1052 100 Watt Amplifier Receiver with Remote (Excellent Condition-See Pics):

For one room or an entire house – the ideal receiver for anyone who wants flexibility, simplicity, and outstanding performance.

Beautifully engineered stereo receiver; 100 watts per channel; three
zone/multiroom capability; composite video switching; A/B speaker
switching.

The RX-1052 conclusively proves that “stereo” is very much a part of
today’s world where both music and movies provide enriching
entertainment for the entire family. The RX-1052 doesn’t limit itself to
one room either. In fact, the RX-1052’s unique combination of
capabilities means you can enjoy your music and video sources in many
different areas of your home: the den, beside the pool, in the kitchen,
or simply relaxing in the living room.

Where Performance Counts

Consider the RX-1052’s basic capabilities for starters. Here,
Balanced Design results in superior performance indeed. We rate power
output very conservatively at 100 watts RMS per channel. But there are
important differences between this rating and ones you may see from
other manufacturers. That’s because the RX-1052 features a rock-solid
power supply built around an oversized custom-manufactured toroidal
transformer coupled to high quality storage capacitors. Eight discrete,
high current output transis- tors insure uncompromising reproduction of
the most difficult sources, even when the RX-1052 is used with
inefficient speakers

in large rooms. Connecting those speakers is easy thanks to high
quality, four-way binding posts. And switching between speaker pairs is
even easier thanks to remote selection. For the vinyl aficionado – or
just folks who continue to enjoy a substantial record collection – the
RX-1052 features a high quality phono preamplifier optimized for moving
magnet cartridges.

Your New Stereo Centerpiece – With Video!

For those who don’t desire the multiple speaker boxes required for
surround sound, the RX-1052 is the perfect complement to a new
flat-panel TV and video sources like a DVD player or satellite box. Four
composite video inputs, a monitor output, and video switching makes
integrating your existing audio gear with the newest video components
surprisingly easy.

Beyond A Single Room

The RX-1052 can be the multi-room/multi-source heart of a “whole
house” audio/video system! When used with six channels of external
amplification – either three stereo amps or an all-in-one six channel
model like Rotel’s RMB-1066 – the RX-1052 lets you direct up to eight
audio or A/V sources to as many as four different locales. You maintain
fully independent source selection, power on/off, and volume adjustment
for each zone! And if you want to “get down and party,” the RX-1052’s
“Party Mode” lets you do just that by piping the same source throughout
your home. The RX-1052 includes four independent composite video
outputs, too,

so you can watch what you want where you want to watch it.
Independent IR (infrared) links give you source control from any room
while four separate 12 volt “trigger” circuits energize just those
system components you need for maximum enjoyment – and maximum energy
conservation.

For Your Consideration:
The RX-1052 combines stunning performance, flexibility, and an impressive array of the features you want most.

■ Balanced Design: comprehensive par ts selection, advanced circuit
board layout, and extensive listening tests for superior performance and
long term reliability

■ Four audio-only inputs: Phono (MM), Tuner (internal), CD, and Tape

■ Four audio and composite video inputs for A/V sources

■ Four audio and composite video outputs (main zone +

three remote zones)

■ Independent source selection and volume adjustment for all remote zones

■ 30 preset AM/FM tuner with frequency direct access

■ Independent source selection for listening and recording

■ Custom label capability for all A/V inputs

■ A & B speaker outputs (with remote selection)

■ Headphone output

■ IR (infrared) remote control capability for RX-1052 and Rotel DVD and CD players

■ Bi-directional RS-232 computer data port for use with touch-screen control systems

■ Upgradeable microprocessor software

■ Detachable IEC power cord

Audio Specifications:

Continuous Amplifier Power
: 100 watts/channel
(20–20k Hz, 120 mV

Pre Amplifier Output Voltage: 1.0 V (160 mV Input)

Input Sensitivity/Impedance:

Line Level: 160 mV/47 kohms

Phono: 2.5 mV/47 kohms 

Tone Controls:  (Bass/Treble)
±8 dB at 100 Hz/10 kHz

Video
Frequency Response: 
3 Hz-10 MHz, ± 3 dB

Signal to Noise Ratio: 45 dB

Input Impedance: 75 ohms 

Output Impedance:
5 ohms

Output Level:1 volt

FM Tuner
Usable Sensitivity: 14.2 dBf
50dB

Quieting Sensitivity: 20.2 dBf (mono) / 45.3 dBf (stereo)

Signal to Noise Ratio: (at 65 dBf)
70 dBf (mono) / 65 dBf (stereo)

Harmonic Distortion (at 65 dBf)
0.3% (mono) / 0.5% (stereo)

Frequency Response: 
30 Hz-14 kHz, ±1.5 dB

Capture Ratio: 2.0 dB
FM Tuner—Cont.

Alternate Channel Selectivity: 47 dB (±400 kHz)

Spurious Response Ratio: 80 dB

Image Response Ratio: 65 dB

IF Response Ratio: 80 dB

AM Suppression Ratio: 52 dB 

Stereo Separation: (100Hz/1 kHz/10 kHz):
40 dB/45 dB/35 dB

Output level; 1.0 V 

Antenna Input: 75 ohms unbalanced

AM Tuner
Sensitivity: 500 μV/m

Selectivity:
25 dB 

Image Response Ratio: 35 dB

AM Tuner—Cont.
Signal to Noise Ratio: 40 dB

Output level: 250 mV

Antenna Input: Loop Antenna

General
Power Consumption: 300 watts
28.4 watts (idle)
13.2 watts (standby) 

Power Requirements: (AC)
115 volts, 60 Hz (USA version)

Weight:
10.8 Kg/30.4 lb. 

Dimensions: (W x H x D)
432 x 121 x 359 mm
/ 17” x 43/4” x 141/8”

Front Panel Height: 
(feet removed/for rack mount)
109 mm / 4.3”

                     <=========================================>

Please
note: We have lots of great stuff it is best to call David your Audio Expert.

Weinhart Design has lots of other items new and used and if
you're in Los Angeles or visiting please accept my invitation to
experience our Audio Showroom and please visit our ALL NEW & IMPROVED web site @ www.weinhartdesign.com

We are always interested in purchasing quality Audio and Video items, LP collections and most quality trades are welcomed.

If you�re
in Los Angeles or visiting please make it a point to visit our new
world class Los Angeles showroom by appointment and experience what is
possible.

VISA, MC and Paypal are only accepted in the United
States and Canada and WE ONLY SHIP to the BILLING ADDRESS or take bank
wire transfers.

For transactions using VISA, MC and
Paypal we add 3% to cover the costs and only ship to billing address
UNLESS you are paying by Bank wire transfer.. All sales out of California are State Sales Tax exempt.

 California State Sales Tax of 8.75% is only is collected for items received in California.

We accept payments by Bank Wire Transfers and bank checks without fees.

Please
call me directly in my world class showroom in Los Angeles weekdays @

310-472-8880 or any reasonable time on my cell including weekends @

310-927-2260 and I can answer your questions and help you with all of
your new and pre owned needs.

 Making Audio Systems better 

   one system at a time,

 
    
     David Weinhart 

Weinhart Design, Inc. 
    President & CEO 
e: [email protected] 
  www.weinhartdesign.com 

The Audio and Video Expert

2337 Roscomare Road, Studio #1 
Los Angeles, California 90077 

 Showroom) 310-472-8880 
     Cell) 310-927-2260