For sale is a customer trade-in T+A PA 3000 HV integrated amplifier finished in gorgeous titanium (which is a significant looks and cost upgrade over the standard silver finish). We sold this unit brand new to our local client a few years ago and helped him set it up in his dedicated listening room. The unit comes complete with all the original accessories: factory packaging, owner's manual/booklet, remote control, and 20 amp power cord. We have rated the unit an 8 out of 10 to be conservative as there a few very small blemishes but it really could easily pass for a 9 out of 10.
The unit will ship via FedEx Ground Insured. Please figure $185.00 within the Continental US as the unit is very heavy and expensive.
Great opportunity to get an amazing unit at an even better price!
Here is some information from T+A's website:
The Integrated Amplifier
The P 3000 HV pre-amplifier and the A 3000 HV power amplifier share many components with the PA 3000 HV, as well as the fundamental design principles and circuit topology. Most of the case components are the same, and the PA 3000 HV and A 3000 HV also employ the same mains units and voltage supplies, output stages, input amplifier and high-voltage amplifier stages. The P 3000 HV pre-amplifier also shares many parts such as the input section, the pre-amplifier, the relay-based volume control, the output section and the front case profiles, complete with control processor and VFD screen.
Achieving absolutely outstanding results from combined devices – such as integrated amplifiers – is more difficult than from separate components, because both the sensitive pre-amplifier stages and the powerful output stages are required to share a common case.
This problem calls for great sophistication in design, and that is why our cases are sub-divided into separate compartments made of 10 mm thick aluminium plates. This construction provides highly effective shielding between the various sub-assemblies, and in this way our development team has succeeded in producing superb sound quality: the measured values, the specification and the power generated by the amplifier are at the limits of what is physically feasible from an integrated amplifier of this size. The components and materials are uncompromisingly first-rate, and the casework sets such high standards that it is superior to much more expensive equipment.
Like all HV machines, the
PA 3000 HV is of consistently symmetrical, channel-separate construction. The
pre-amplifier circuit boards with input section, the volume control and the
high-voltage amplifier are located in the upper compartment under the case top
cover; the symmetrical layout eliminates electromagnetic influences. The
compartment consists of thick-walled aluminium plates, and is completely
separated and shielded from the power output stages, the current and voltage
supplies and the loudspeaker outputs in the bottom compartment.
The socket section on the back panel reveals the PA 3000 HV’s comprehensive
connection facilities and rigidly symmetrical construction. There are four
balanced inputs which can alternatively be configured as unbalanced types, plus
two further unbalanced inputs and a recorder input. Input No. 4 can be operated
in surround (pass-through) mode in order to use the power amplifier of the PA
3000 HV for the front channels of a surround decoder. For the pre-amplifier
there is one balanced and one unbalanced output.
Two pairs of loudspeakers can be connected to the solid
high-current loudspeaker terminals, which are made of pure brass with all
surfaces rhodium-plated. H-Link (HV data bus), LAN socket, trigger input, RC-in
for E-2000 and an earth terminal are also present. Since the momentary power
drain can be very high, the machine is fitted with an oversized mains input
socket. The de-coupled feet are adjustable, ensuring that the machines stand
stably even on uneven surfaces. Der PA 3000 HV is supplied complete with the F
3001 infrared remote control unit. Upon request the P 3000 HV can be fitted
with High-End phono pre-amplifier modules, which feature different circuit
topologies for MM or MC pick-up systems. The analogue signal processor module
developed to act as signal controls for the P 3000 HV is available for use with
the PA 3000 HV and PA 3100 HV as well.
RMS output per channel into 8 Ohms 300 Watt RMS output per channel into 4 Ohms 500 Watts Peak output per channel into 8 Ohms 380 Watts Peak output per channel into 4 Ohms 700 Watts Power bandwith 1 Hz – 150 kHz Frequency response + 0 / – 3 dB 0,5 Hz – 180 kHz Slew rate 60 V/μs Damping factor > 65 Signal / noise ratio > 115 dB Total harmonic distortion < 0,03 % Reservoir capacity 120000 μF
Next Level Audio & Video is a premier retailer of the world's finest HiFi products. We operate by appointment and offer our clients the opportunity to experience systems not heard elsewhere. We are proud to support our business partners including: Aavik, Ansuz, Arcam, Burmester, Devialet, Dynaudio, Focal Sopra, Naim, Nordost, Octave, PMC, Raidho, Rega, REL, Scansonic, Soulution, & T+A.
Payment can be made by Check, Cash, Money Order, Credit Card, or PayPal. Credit Card or PayPal adds 3.5% to the total.
Illinois Residents add 7% to the total.
Local pickup is available as well at our brick and mortar HiFi shop.
Feel free to contact us at the following for questions, appointment requests, and or orders:
Next Level HiFi
32W270 Army Trail Road
Wayne, IL 60184