Tube Audio DesignTAD-125Tube Audio Design TAD-125 Mono Block AmplifiersHibachi amps are built with discrete transistors. A class A/B design with a twist - near zero feedback is finally achieved in a solid state design with sideline out of audio path DC nullificati...600.00

Tube Audio Design TAD-125 Mono Block Amplifiers [Expired]

no longer for sale

Hibachi amps are built with discrete transistors. A class A/B design with a twist - near zero feedback is finally achieved in a solid state design with sideline out of audio path DC nullification circuitry. This new feedback technology reveals recorded harmonic information like tubes. Each balanced pair stage is directly wired without coupling caps for outstanding perfect phase clarity. An enormous high current 8-pound hum free pure copper toroidal power transformer feeds an extra large filter cap bank to promote high speed bass current capability. Hibachi amps reveal ear pleasing tube amp 2nd order harmonic content other solid state amps by design can not play. 205 Watts with 4-Ohm speakers, 180W with 8-Ohm speakers. This powerhouse pair is made to deliver the best possible sound from speakers rated above 85db/1-Watt. 2-Ohm to 24-Ohm impedance, efficient horns to low impedance fluctuating electrostatic panels are a great match. Beautiful deep clear coat piano black enclosures have removable rubber isolation feet. Place on the floor near speakers or in your audio rack, horizontal or vertical. They run warm to the touch, make sure the cooling fins have access open air space - cranked up cooling fins will become hot to the touch but not sizzling hot. Have it all: Bass kicking solid state with live in the room high definition midrange imagery. Over 350 pairs are plugged in and singing around the country. A very satisfying ear pleasing pair of amps with a proven track record. Perhaps the best sounding pair of solid state mono blocks you can buy. Google TAD 125 and read the reviews for yourself, you'll find many people are very pleased with these amps.

Hibachi: Palin Jane, H2 & H2SE Models SPECS & DETAILS

  • Class A-B Transistor, 205W RMS Clean into 4-Ohm speakers, 180W RMS into 8-Ohm Speakers
  • Best with speakers rated over 85db, 2-Ohm to 24-Ohm
  • Perfectly Flat Frequency Response 5Hz-50kHz, -3db 2Hz-200kHz
  • Cutting Edge Design without feedback reveals recorded harmonic structures like a tube amplifier while maintaining solid state bass capabilities
  • Features Soft Clipping like tube amps
  • NO Coupling Caps, Directly Connected Part To Part for Zero Loss in Detail, Zero Phase Shift Blur
  • 0.7V-RMS input for full power (normal CD player line level output drives them full blast)
  • Easy to drive 46k Input Impedance
  • Small volume knob (No volume control H2SE) on each amp to adjust the input sensitivity to match oddball high gain preamps
  • Hibachi-II's have External Access Speaker Protection Fuses (Inside fuse holder on H2SE) Supplied with 4-Amp speaker fuses for 200W rated speakers, Use 3-Amp speaker fuses to protect <200W speakers
  • 17 Pounds Each Block
  • 13-1/2" x 11" x 9" Tall to top of binding posts
  • Giant toroidal high current 8-pound power transformer with vacuum tube line filter and huge film bypassed filter cap array
  • Self test power up: Red light speaker stays disconnected for 2-seconds then relay clicks to Green light
  • Draws very light current idling silent (12-watts), <1mV ripple hum, for convenience can be left on - read next line
  • A Power Conditioner with relay disconnect surge protection is highly recommended to protect your valuable audio equipment
  • Large WBT Style gold 5-way speaker wire binding posts accept all raw wire gauges, large spades and banana plugs
  • Versatile high quality 4-Way Solid Nickel RCA Input jacks (Single Gold RCA on H2SE - no extra jacks): Use one RCA for the normal mono block input. Extra Jacks have many purposes. You can combine L & R preamp signals on the amplifier using 2 RCA jacks to make a Mono center speaker amplifier. Has 2 more RCA jacks to easily daisy chain connect another amp for bi-amp capable speakers. Can use the extra jacks for Home Theater: Connect your HT processor front L-R and your 2-chan music preamp L-R outputs to each amplifier at the same time - has a unique TAD designed isolation network on the RCA jacks. Extra RCA jacks are ideal for connecting signal to a powered subwoofer 
  • Seller Information


    Last 12 months

    Member since October 2014

    Items from this seller