Audio Research LS-27 Pre-Amplifier Natural Finish

Audio Research LS-27 Line Stage Pre-Amp in near mint condition.  Meticulously cared for.

Includes remote, manual, power cord, original packaging, and new Sovtek tubes. 

All photos are of the actual item.

Specifications

FREQUENCY RESPONSE: +0-3dB, 0.2Hz to 160kHz at
rated output (Balanced, 200k ohms load)

DISTORTION: Less than .01% at 2V RMS BAL output.

GAIN: Main output: Selectable for each input: 24dB,
18dB,

12dB Balanced output. (18dB, 12dB, 6dB SE
output.)

Record output: 0dB (Processor input: 0dB
balanced).

INPUT IMPEDANCE: 120K ohms Balanced, 60K ohms SE.
Inputs (8): Tuner, Phono, CD, Video, Aux 1, Aux 2, Moni-
tor, Processor (XLR and RCA connectors).

OUTPUT IMPEDANCE: 700 ohms Balanced, 350 ohms SE
Main (2), 20K ohms minimum load and 2000pF maximum
capacitance. Outputs (3): 2 Main, 1 Record (XLR and RCA
connectors ).

OUTPUT POLARITY: Non-inverting.

MAXIMUM INPUT: Low Gain: 48V RMS BAL, 24V RMS
SE, Medium Gain: 24V RMS BAL, 12V RMS SE, High
Gain: 12V RMS BAL, 6V RMS SE.

RATED OUTPUTS: 2V RMS 1Hz to 100kHz into 200K ohm
balanced load (maximum balanced output capability is
15V RMS at less than 0.5% THD at 1kHz).

CONTROLS: Rotary volume selector (104 steps) and
rotary input selector.

Push buttons: Power, Mono, BAL / SE, Proc, Monitor, Mute.
Also remote buttons: Display, Bal L, Bal R, Hours, Invert,
Gain.

POWER SUPPLIES: Electronically-regulated low and high
voltage supplies. Automatic 50 sec. warm-up/brown-out
mute. Line regulation better than .01%.

NOISE: 1.3uV RMS residual IHF weighted balanced
equivalent input noise with volume at 1 (100dB below 2V
RMS output).

TUBE COMPLEMENT: 2-6H30P dual triode, (Hybrid
JFET/ tube audio circuit, solid-state power supply.)

POWER REQUIREMENTS: 105-130VAC 60Hz (210-
260VAC 50/60Hz) 50 watts maximum.

DIMENSIONS: 19" (48 cm) W x 5.25" (13.4 cm) H
(standard rack panel) x 13.3" (33.8 cm) D. Handles
extend 1.50" (3.8 cm) forward of the front panel.

WEIGHT: 16.3 lbs. (7.4 kg) Net; 23 lbs. (10.5 kg)
Shipping.