Jolida JD 302CRC Jolida JD 302CRC 50 watts per channel integrated amplifier
Listed · 544 Views
3 Watchers
Items from this seller
This listing has ended.
Listings Similar to Jolida
Time Left: Listing Sold
This listing has ended.
| Condition | |
| Payment methods |      |
| Ships from | West Palm Beach, FL, 33411 |
| Ships to | United States |
| Package dimensions | 20.0" × 17.0" × 12.0" (47.0 lbs.) |
| Shipping carrier | FedEx |
| Shipping cost | $50.84 |
| Original accessories | Remote Control, Box, Manual |
 Average | Research Pricing |
I purchased this unit new in 2013 as my entry into tube audio. I estimate that it has 600 hours of listening time on it. I am rating it as 8/10 due to one of the rear speaker cables is loose, I did that trying to attach speaker cables learning to favor the use of banana plugs over a spade plugs. The batteries leaked in the remote control, it works and the exterior of the remote was affected on the bottom of the remote with a slight blemish.
Specifications
Rated Output Power: 50 W per channel at 8 ohms, 25Hz to 50KHz
Maximum Power Output:
75 W per channel at 8 ohms, 1KHz
Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB
Bandwidth: 15Hz to 80KHz + 3dB; 0dB 50 W 1KHz
Distortion THD: Less than 1% at 50 W output, 28Hz to 15KHz
Circuit Type: Ultra Linear, Class AB
Input Impedance: 100Kohms
Input Sensitivity: 500mV at 1KHz for 50 watt output
Output Impedance: 4 ohms and 8 ohms
Negative Feedback: Less
than 5 dB
Noise and Hum: 85dB below rated output
Tube Complement: 2 matched pairs (4) of EL34/6CA7 power output; 2 pcs. 12AX7A/ECC83
pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.
Power Requirements: 110V-120 VAC 50Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option)
Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high
Weight: 39 pounds (18 Kg) net, approximately 46 pounds (21 Kg) packaged
Bias
Settings: 400 millivolts + 50 mV
Fuse: 110-120 VAC, 6.3 Amp Slo Blo; 200 - 240 VAC, 3 Amp Slo Blo Size 5mm X 20mm
Construction Details and Features:
o Fully Integrated
Stereo Amplifier: Input 400mV driving 50 watts, maximum 75 watts
output.
o EZ Biasing
Biasing made simple. Turn the screw until the light goes on, the tube is
biased.
o Multiple Inputs:
Front mounted selector switch-CD, DVD, Tuner and Aux. (for TV, VCR or
Computer. A bypass function which
allows your amplifier to operate as a power amp.
o Custom Wound
Audio Transformers with a core of German grain oriented silicon
steel. 15th generation proprietary
design. Secondary can be configured for a 4 ohm or 8 ohm load.
o Remote Control:
Standby, volume and mute
o State
of the Art Components: ALPS audio potentiometer, gold plated RCA
Buyer pays PayPay (3%) and
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.
If you pay using Audiogon Express Checkout (credit card through our marketplace) you will have 7 days from the date of delivery to request a refund, regardless of the seller's return window.
