Manley Neoclassic 300B SE-PP SET/PushPull 300B--Incredible Amps!!!

A fantastic pair of Manley Neo-Classic SE/PP 300B amps that we just received on trade.  These are one owner amps that we sold new in Sept of 2013....in fantastic condition.

300B based amps that can run in either single ended mode or push-pull mode with negative feedback adjustments!  They sound incredible!

Amps will ship in original boxes with power cords and owner's manual.  Stock tubes will be supplied (Sovtek and Ruby) along with upgraded EH 300B Gold power tubes.  These tubes all have limited use as the original owner ran other tubes in these amps.

Specs --

• Vacuum Tubes: 2 x 300B (Output), 1 x 6SN7 (Driver), 1 x 6SL7 (Input),
  2 x 5AR4 (Rectifier). (Units prior to 2011 used 5U4 rectifier tubes.)
• Output Power @ 1kHz with 5 dB FeedBack in SINGLE-ENDED: 11 Watts @ 3% THD
• Output Power @ 1kHz with 5 dB FeedBack in PUSH-PULL: 24 Watts @ 1.5% THD
• Frequency Response with 5 dB FB in SINGLE-ENDED: 15 Hz - 15 kHz ±0.5 dB (measured at 5 watts)
• Frequency Response with 5 dB FB in PUSH-PULL: 10 Hz - 20 kHz ±0.5 dB
• GAIN SE Mode 0dB Feedback Setting: 30 dB
• GAIN SE Mode 10dB Feedback Setting: 20 dB
• Input Sensitivity with 5db FB SINGLE ENDED: 700mV for Maximum Power
• Input Sensitivity with 5db FB PUSH-PULL: 450mV for Maximum Power
• Input Sensitivity with 5db FB SINGLE ENDED: 165mV for 1V output into 8 Ohms
• Input Sensitivity with 5db FB PUSH-PULL: 160mV for 1V output into 8 Ohms
• S/N Ratio: SINGLE ENDED: 83.5dB Ref. 1W; 2.83v//8 Ohms,20KHz BW; 5dB FB.
• S/N Ratio: PUSH-PULL: 85.4dB Ref. 1W; 2.83v//8 Ohms; 20KHz BW; 5dB FB.
• Dynamic Range: SINGLE ENDED: 94dB Ref. 3% THD; 20KHz BW; 5dB FB.
• Dynamic Range: PUSH-PULL: 99.5dB Ref. 1.5% THD; 20KHz BW; 5dB FB.
• Input Impedance: 100 kOhm, direct coupled.
• Optimum Speaker Load (switchable): 4 to 12 Ohm range appropriate for 4 & 8 Ohm speakers

- 12 to 20 Ohm range appropriate for 16 Ohm speakers

• Actual Output Impedance SINGLE ENDED: 2.25 Ohms
• Actual Output Impedance PUSH-PULL: 1.86 Ohms
• Damping Factor SINGLE ENDED: 3.5
• Damping Factor PUSH-PULL: 4.3
• Maximum Power Consumption: 240 Watts
• Mains Voltage Frequency: 50~ 60Hz
• Power transformer factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
• Operating Mains Voltage changeable with power transformer re-wiring and fuse value change.
• Mains Fuse 100-120VAC operation: MDA 3 Amp SLO-BLO Ceramic Time-Delay fuse
• Mains Fuse 220-240VAC operation: MDA 1.5 Amp SLO-BLO Ceramic Time-Delay fuse
• B+ Fuse: MDA 400 mA SLO-BLO Ceramic Time-Delay fuse
• Badge Illumination: Units produced before 7/2003 use 8V, 0.3A
  "Fuse-Lamp" 1/4" X 1 1/4" - Serial numbers after NSEPP314 use LED
  illumination which probably won't burn out
• Dimensions: W= 8.5, D= 23, H= 9 inches, Including projecting controls and parts
• Minimum Mounting Surface Dimensions: Feet Footprint = W= 7.5" D= 18"
• Shipping Weight: 41 lbs. Each.

US Sales only please.  NC residents plus sales tax.


Thank you!

Taylor
www.goldprintaudio.com

PS Audio —- Leben —- KEF -- Line Magnetic —- DeVore Fidelity -— Joseph Audio -- Rogue Audio -- Manley Labs -- VPI Industries -- Sugden —- Bel Canto -- Alta Audio -- Tannoy -- Rega -- Kimber Kable -- Ortofon -- Chord -- Sonos -- Quadraspire -- Salamander -- SVS Sound -- Torus Power —- Audio Desk —- Gingko —- Auditorium 23 —- Box Furniture —- Cary Audio — EMT