Type: Powered High-speed mini-subwoofer with electronic crossover.
Cabinet Design: Sealed enclosure
Finish: Light Ash
Woofer: 10" Extreme-Duty driver suspended by double-thick butyl rubber surround with long-throw design (1.5" peak-to-peak excursion potential). The 70mm voice coil is aligned in the gap with a double-thick spider and is driven by a 15-lb magnet assembly.
Amplifier: High Current design with high-bias Class A operation in the preamp section, Class AB output section. AC power is switchable between 117V and 230V. CE approved for Europe. Auto shutoff with green/red LED.
Output Power: 300 watts r.m.s. continuous with 600 watt peaks
Distortion: Less than 0.8% at full output
Input Impedance: 22 k Ohms
Input Sensitivity: 150 mV
Electronic Crossover: Adjustable from 40 Hz to 100 Hz with 12 dB/Octave slope with bypass switch to disengage the internal crossover when used with a multi-channel processor.
Signal to Noise Ratio: 85dB
Frequency Response: 20Hz to 100Hz (+/-2 dB)
Inputs: Stereo RCA jacks for processor, hi-level inputs and outputs with five-way binding posts.
Controls: Volume level, Crossover frequency 40 -100 Hz, Phase reversal 0-180-deg, Crossover bypass switch, A.C power on-off.