Block Power Amplifier
Audio Experience Reference One Mono Block
Power Amplifier is a Full balanced design power amplifier. It provides
sound deep and wide stage, accompanies with reality sound image and a
emotions sound presentation.
It uses one matched pair of KT120 power
tubes and UL working status to provide 110W adequate output for most of the
Hi-End Speakers to ideal performance. Moreover, the high quality output
transformer combines with high performance full balanced circuit design lead
to an extremely low loss, wide sequence sound effect and excellent phases
output. This power amplifier case structure and parts arrangement are perfect,
the signal path is directly and shortly connected. Great heat dissipation, an
anti-shock and anti-RF function to guarantee it works at a very stable status.
For sure, this machine is produced by point-to-point methodology.
The full balanced input stage is 12AT7 direct coupling
to 12AU7 full balanced driver stage , The driver stage use high quality
capacitors to KT120 power tube , The KT120 work at P-P mode to driver Tango output
transformer , The Tango FC-120-5 output transformer has very low
Insertion Loss 0.18dB only. ( Many tube power amplifier in Hi-End
audio market , Their have the output transformers is over 1dB Insertion Loss .
only about 10% very high price tube amplifier use under 1dB Insertion Loss of
output transformer ) . The output transformer has low insertion loss is very
important , the best of the best is 0 dB Insertion Loss , The output
transformers for High End tube amplifier need under 1dB Insertion Loss .
The Insertion Loss over 1.5dB output transformer will lost many low level music.
, NFB value , tube type , circuit all select by listen test.
The use high quality transformers .
- The power transformer is special audio R-core
transformer , high current , low noise .
- Tango LC grade choke.
- The output transformer is Tango
wide frequency range , low distortion , low phase shift , good damping
Output : 110W watts
from 20Hz to 20kHz.
Input : Balanced ( XLR
) x 1
Input Impedance : 100K
20Hz ~ 20K Hz +/-0.3dB at 100W.
5Hz ~ 100K +/-1dB at 1W.
Sensitivity: 2.8V RMS rated output.
Taps: 4 ohm , 8 ohm , 16 ohm.
factor : approximately 28
Required for each black: ( 2 ) Matched pair KT120 Power Output , ( 1 )
12AU7 Driver , ( 1 )12AT7 Input .
Phase Mode : Normal
Dimension: 300mm x 438mm x
233mm (W x D x H) each
KT120 power tubes.
The amplifier Include : Box , Power Cable , Manual , All Tubes.
2 year warranty ( not include tubes and ship cost )
The Payment Methods and Shipping
I can ship the amplifier to any local.
Please, e-mail to me ask about the cost of shipping .
Factory Direct Sell from Hong Kong .
Made in Hong Kong. This is promotional price
For more information, please click to YS-Audio Online
The Pacific Valve & Electric Company
1921 Wilson Street
Suite A # 111
Batavia, IL 60510
Web site : http://www.pacificvalve.us