MC 64 dB + 10 dB (74 dB in total) / MM 44 dB + 10 dB (54 dB in total)
Frequency response (1Wrsm, -3db)
5Hz - 120KHz
THD
<0,05%
S/N ratio
>90dB “A” weighted
RIAA accuracy
+/- 0,1 dB
Channel Unbalance
<0,04 dB
Stereo separation
>95 dB @ 10 KHz
MC input impedance
from 7 ohm to 980 ohm in eight step plus a custom resistor value
MM input impedance
from 47pF to 600 pF in twelve step plus a custom capacitor value
Output impedance
All outputs 500 ohm
Phase
Non inverted
Maximum consumption
65W
Dimensions and weight
420x92x330mm (WxHxD), 10,5Kg
Shipping dimensions and weight
570x270x570mm (WxHxD), 13Kg
Bartok
Type
Upsampling Network DAC without Headphone Amplifier
Dimensions
444mm / 17.5” x 430mm / 17.0” x 115mm / 4.6“. Allow extra depth for cable connectors
Weight
16.7kg / 36.8lbs
Converter Type
dCS proprietary Ring DAC™ topology
Digital Inputs
Ethernet network port on RJ45 connector, accepts 24-bit 44.1 – 384kS/s PCM, DSD/64 & DSD128 in DFF/DSF format; USB 2.0 interface on B-type connector, accepts 24-bit 44.1 – 384kS/s PCM, DSD/64 & DSD128 in DoP format; USB On-The-Go interface on A-type connector, accepts 24-bit 44.1 – 384kS/s PCM, DSD/64 & DSD128 in DFF/DSF format; 2 x AES/EBU inputs on 3-pin female XLR connectors, accepts 24-bit 44.1 – 192kS/s PCM, DSD/64 & DSD/128 in DoP format; 1 x Dual AES pair, accepts 24-bit 88.2 – 384kS/s PCM, DSD/64 & DSD/128 in DoP format; 1 x SPDIF on RCA Phono connector, accepts 24-bit 44.1 – 192kS/s PCM & DSD/64 in DoP format; 1 x SPDIF on BNC connector, accepts 24-bit 44.1 – 192kS/s PCM & DSD/64 in DoP format; 1 x SPDIF optical on TOSLINK connector, accepts 24-bit 44.1 – 96kS/s PCM
Analogue Outputs
1 x pair balanced outputs on 2 x XLR connectors. Output levels: 0.2V, 0.6V, 2V, 6V rms for a full-scale input, set in the menu. Output impedance: 3Ω. Maximum load: 600Ω (10k-100kΩ is recommended); 1 x pair unbalanced outputs on 2 x RCA connectors. Output levels: 0.2V, 0.6V, 2V, 6V rms for a full-scale input, set in the menu. Output impedance: 52Ω. Maximum load: 600Ω (10k-100kΩ is recommended)
Wordclock I/O
2 x Word Clock Inputs on 2 x BNC connectors, accept standard Word Clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz. The data rate can be the same as the clock rate or an exact multiple of the clock rate. Sensitive to TTL levels. 1 x Word Clock Output on 1x BNC connector. With Sync Mode set to Master, a TTL-compatible Word Clock is output
MQA
Full decoding and rendering of MQA data from the Network and USB2 inputs. Final rendering of unfolded MQA data only from the other inputs
PCM mode: up to 6 filters give different trade-offs between the Nyquist image rejection and the phase response. DSD mode: 4 filters progressively reduce out-of-audio band noise level, plus Filter 5 which has an improved transient response
Conversions
User selectable PCM upsampling to DXD, DSD or DSDx2
Software Updates
Download and update functionality available via dCS Mosaic Control app
Local Control
dCS Mosaic Control app for unit configuration and playback. RS232 interface (controlled by a 3rd party automation system). dCS Universal Remote is available as an optional extra
Power Supply
Factory set to either 100, 115/120, 220 or 230/240V AC 50/60Hz
@roc_doc thanks for your comment. The amp itself doesn't run too hot, but I would not use tubes so close. The window is probably worse for keeping the piano in tune but I don't really notice