Description

I've made three significant changes to my system in the last year: Jim Smith voiced my system. I added isolation to the components. And I upgraded my entire analog front end.

Jim Smith, author of "Get Better Sound", voiced my system to my room resulting in a much better room/speaker/listener relationship. The equipment disappears and I am left immersed in the music. Tone, Dynamics and Presence reached a new level.

Isolating the equipment resulted in much improved resolution, quieter backgrounds and greater extension. Music sounds much more natural.

The new analog front end extracts information that I did not realize was in the medium. I have a new respect for the importance of the source component.

I listen mostly to acoustic, small-scale classical and jazz on vinyl. Ray Brown, Shirley Horn, Chet Baker. Bach, Beethoven and Brahms.

I listen about 12 hours a week and just get lost in the music. I'm now working on growing my collection of records and learning about classical music.
Read more...

Components Toggle details

    • Air Tight Supreme
    Wonderful cartridge. Replaced my Air Tight PC-1 Very quick, detailed and extended. Excellent dynamics and body. Natural timbre.
    • SME Series V-12
    Replaced the SME V. This 12 inch arm is more detailed, has better extension and less distortion than the standard SME V. It is an extremely solid and controlled tone arm.
    • SME Model 30/12A
    This replaced my SME Model 10/A. The table and Vibraplane (everything black in the photo) weigh a total of 400 lbs. The added mass, isolation and newly designed power supply for speed accuracy and stability are a significant upgrade. Refined, detailed, and extended, the SME 30/12 with V-12 arm sets a new standard in analog playback for me.
    • Pass Labs XP-25
    Upgraded from the Ono, then XOno. More refined sound. Excels in tonal density, timbral accuracy and spacial layering.
    • Pass Labs XP-20
    Replaced the X-1. Lower noise, more detail and air. Better dynamics. Extremely neutral and low in distortion.
    • Pass Labs XA160.5
    Had to go with monoblocks because of speaker location on each side of fireplace. Upgraded from the XA100.5. The Mini II's need the extra power/current. Wonderful control, transparency, timbre and sense of effortlessness. Best amps I've had in the system.
    • Magico Mini II
    Replaced Eggleston Rosa. Incredible transparency, lack of distortion, and coherence. Scale, dynamics, timbre all very natural. Demanding load. Very appropriate size speaker for my small room. The room/speaker interface works very well.
    • Transparent Audio Reference PowerIsolator
    Noise suppressor, surge protector and line conditioner. Replaced an Equi=Tech Q650
    • JPS Labs In-Wall AC
    Three 15' cables terminated with Furutech IEC's are directly connected from the AC panel to each of my amps and to the Equitech unit bypassing outlets.
    • Transparent Audio REF XL
    Phono cable DIN to RCA, 3' IC RCA from phono to preamp, 20' XLR from preamp to amps. These replaced Harmonic Technology Magic Link 2.
    • Transparent Audio REF XL Speaker Cable
    8' mono cables. These replaced Harmonic Technologies Pro Nine Plus.
    • Vibraplane 2210-01-13
    This is the passive 24
    • Townshend Seismic Sink Model 2
    I have three (5) of these on my rack. They are the older version with air bladders and LED lights to indicate level of inflation. I use them under my TT motor controller, my phono amp and my pre amp. They isolate the electronics from floor born vibrations resulting in increased clarity, focus, more apparent detail, particularly in the bass frequencies. Bass is more articulate, defined and has more weight. Along with the Vibraplane under my TT, the added isolation is a significant improvement.
    • Loricraft PRC4 Deluxe
    Replaced my VPI 16.5. Cherry finish, very quiet. Works exceptionally well, especially with Audio Intelligent 3-step cleaning solutions. I follow this with a demag sweep and new MoFi inner sleeves. Startling improvement in detail, clarity and dynamics. The only down side is cost and the 20-25 minutes per side cleaning time.
    • Audio Intelligent Vinyl Solutions #15 plus 3-step formulas plus rinse
    Very effective cleaning regimen. I use five steps in total and it takes about 30 min. per LP side, but the results are worth the effort. With super clean records, more information is extracted and the noise floor is lower for increased details and dynamics.
    • Mint LP Best Tractor
    Arc-type protractor for extremely acurate alignment. Patience required, but results are well worth it. Clear audible improvement.
    • Mint LP Protractor
    Custom made arch-type protractor. Note the flatter arch for the SME V-12 arm versus the SME V arm and the shorter overhang. Result is lower distortion.
    • Acoustic Revive RR-77
    Shuman Resonator. Positive effect on sense of space and depth.
    • Acoustic Revive RWL-3
    Diffusion panels. Increased stage width and made sound seem more natural.
    • ASC Tube Traps 16
    I have these in the four corners behind my speakers. They help tame bass nodes resulting in increased clarity and coherence. They also help with stage depth and imaging.
    • Acrylic Custom Dust Cover
    Custom made acrylic dust cover for SME 30/12.
    • DIY Custom Rack
    I designed and built this custom birch-ply and cherry rack for front end equipment. 17-ply birch selected to match speakers. Extremely strong, heavy and rigid. Replaced Zoethecus four shelf rack. The top shelf alone needs to support the 400 lbs of black steel in the Vibraplane and turntable. It can't be moved or rocked by hand.

Comments 162

Showing all comments by lapierre.

View all comments

Well done Peter.

Nice pickup of the TA components. Like the direction and latest upgrades to your system. I'm sure you did your due diligence and patiently made the correct decision. JPS in-wall cable directly to PowerIsolator-classic Peter move.

Did you research other competitor products?

Moving in the same direction but leaning toward Synergistic Research components.

lapierre

Cool Pete.

Nice touch on the 3/16 reveal.

Still thinking my equipment rack will be horizontial with a 3 inch base. No table legs.

Vacuum press seems to come to mind if gluing the two birch plywoods. Use sprial bit to cleanup the edges.

Simple oil and wax but no poly.

lapierre

Pete with the weight recommendations mortised the legs makes sense.

What about the top? Wood dials, glue and a lots of clamps.

Pretty rigid design.

lapierre

Pete noticed you have custom equipment rack. How did you attach the birch shelves to the cherry legs for strength?

Mortise and tenon

lapierre

Love the small monitors as well my friend.

Mini 2 is great speaker with the sandwiched layers of Birched plywood and aluminum baffel. Closed enclosure I don't have a lot of listening experience. Being a wood worker, I just love the design of the enclosure and understand it in great detail.

Rosso Fiesole is around 6K. The super tweeter (murata) IMO is a great design to increase the mids and lows clarity as well as further enhancement of nature sound of persussion or instrument decay. Thinking cymbals as this seems to be a hot topic recently in GON forums.

The dampening system used with the Nomex 6 1/2 woofer allows for authoritative and controlled low frequencies-for small monitors. I think it's rated at 50Hz but I read some measurements where 40Hz and below. Notice the front aluminum baffel--simiar to Mini 2.

If your willing you can let me borrow the Mini's in North Florida for me to trully experience the Magico closed enclosure.

lapierre

Hey Pete have you research Rosso Fiesole montor:

http://www.rossofiorentino.com/en/collections-fiesole.asp

How's the Magico Mini sounding these days?

Still prefer the Mini II over the Q1?

lapierre

Imagine with subs Mini IIs would give full range speaker great challenge.

BTW...the MIni IIs just look right in your listening room.

Did you see the S5 Magico posted on the web site? Wonder if this is a new series and if there will be a S1.

lapierre


Pete have you researched Raidho Acoustics C1.1 speakers?

Raidho C1.1

Sealed ribbon tweeter with small (5") mid/bass driver with frequency of 50 Hz to 50 Hz. Vented enclosure.

Q1 or C1? That would be a great audition. Q1 has larger driver and much larger enclosure with measured lower frequency of 32 Hz.

lapierre

Thanks Pete for the detailed information.

Happy listening. And what's next on your HiFi roadmap?

lapierre

Hey Pete,
Continue reading your post on changes made to your great system.

Can you tell me your listening distance before and after the Jim Smith changes?

lapierre

Pete you going for the Q1s in the future?

lapierre

Well done on each component selection. Very well done indeed.

Read your review on the XA100.5. Notice your review mention no aftermarket power cords for the amps (yeah me too.)

What is your next move on improving your system?

lapierre