Description

Basically pursuing what my Dad initiated when I was a kid. The pursuit of what moves me the most, the sound of music.

Dad, thank you!
Read more...

Room Details

Dimensions: 15’ × 13’  Medium
Ceiling: 7’


Components Toggle details

    • VPI Industries Aries Scout
    JMW-9 Tonearm.
    • TT Weights Audio The VPI Screw Clamp
    The VPI Screw Clamp (12.2 oz/345 Grams) Aluminum.
    • Dynavector DV-20XL
    Low output moving coil.
    • Walker Audio Precision Motor Controller
    Designed for all turntables using A/C motor.
    • K&K Audio Phono Preamplifier
    A Hybrid Mosfet/triode circuit design. Lundhal audio output transformer, oversized power supply. 

    Tube complement, 2 Svetlana Electron Devices 6N1P triodes.

    Moving Magnet input, 41 dB
    Moving Coil input, 61 dB
    • Almarro A318B
    Single ended, Class A, Zero Feedback, 18 watts.
    6C33C-B power tubes, RCA VT-229/6SL7 GT input tube, Early Russian 6H8C/6SN7 second stage (cathode follower) tube.
    • Naim Audio CD-5i
    • Omega Speaker Systems Super Alnico Monitor
    Proprietary 6" Omega Alnico Hempcone
    94.5 dB sensitivity
    Impedance, 8 ohms
    Crossover, none

    Finished in natural hand rubbed cherry wood finish.
    • Sound Anchors 3 Post Speaker Stand
    Made out of large section square and rectangular steel tubing. Pre-filled at the factory.

    Dimensions, 20" tall, width (top plate) 10" width, 14" deep. 

    Sound Anchors conecoasters disks which are made of stainless steel, provide protection and easy manuevability. 
    • MIT Z-Center
    MIT Z-Center AC Filter
    • Golden Sound DH Cones Large and Ceramic pads
    DH Cones are ceramic stands enhancing audio system by minimizing sound vibrations and distortions to stereo equipment. DH cones are made of high-tech ceramic material.

    Golden Sound DHLabs pads Ceramic made, similar to the cones.  
    • Herbies Audio Lab UltraSonic SS-9 Damping Instrument
    Tube dampers for small-signal miniature nine-pin tubes.



    • Neuance Platforms B Platform
    Isolation platforms!
    • Butcher Block Acoustics Maple Edge-Grain audio platform 3" thick
    19"X18"X3" (2)
    18"X15"X3" (1)

    Rock hard sugar maple
    Hanks hardness scale score:1450
    Lamination, edge grain

    All platforms supported by 4 Anti-vibrations pads made of rubber/cork construction.

    Anti-Vibration Spikes: Rock Hard Sugar Maple, and Black Walnut.
    • Walker Audio Resonance Control Disks
    1/2-inch control disks.
    • Audioquest King Cobra
    PSC+ Copper conductors. Shielded. Used as phono cable for my VPI Scout.

    Audioquest, GroundGoody Turntable ground wire. Saturn offers perfect surface Copper+ conductor for an ultra pure ground path.
    Being use in conjunction with King Cobra. 
    • Discovery Cables Discovery
    Teflon dielectric. Twin axial design, and standard foil and braid shield.
    • Discovery Cable 1-2-3
    This cable consists of six(6) conductors, three positive and three negative, spiraled around a hollow tube. The conductors are all 16AWG OFC stranded copper with Polyethelene dielectric.
    • Discovery Cables Signature
    Terminated with Clearaudio Profi-MPC-RCA Connectors.
    • PS Audio X Stream Power Punch
    Features * Connectors machined from solid billet * Braid shielded * IEC connector * Nickel plated and polished * Hermetically sealed connectors * Removable ground pin * 12 Gauge multistrand * Hot and cold welded connections Benefits * * Perfect for source equipment * Shielded power * Lowers noise floor * Helps eliminate ground loops * Improves performance of anything connected
    • Salamander Synergy
    Double S30, cherry and black posts finished.
    • SolidSteel WS-5
    Heavy gauge steel frame
    3/4" MDF shelf with 3 aluminum insulation cones.
    • RoomTune-Michael Green Audio Tunepack
    four 12"x24" XLTstwo 16"x10" EchoTunes and four 15" triangle CornerTunes 
    • Korneff clone Oliver Sayes DHT
    Korneff clone built by Oliver Sayes. Emission Labs 45 and 274B Mesh tubes.
    • Yamamoto Soundcraft Oliver Sayes DHT Yamamoto clone
    Yamamoto clone built by Oliver Sayes (sonic _oli). Emision Labs 45s and 274B Rectifier.

Comments 44

Owner
Also Pdreher, beautiful system and I love the dog!

toudou

Owner
At Artk, thank you and sorry about the late reply haven’t been visiting this site as much as I would like to. 

Pdreher, the Almarro indeed a work of art! Everyone who sees it are intrigued by it especially about those 6C33B Russian tubes. 

Thank you

toudou

The Almarro amp is a work of art!

pdreher

Beautiful!

artk

Owner
The Korneff and Yamamoto were built by Jeff Korneff aka "sonic oli". I once owned a pair of Klipsh Cornwalls and used those amps.

toudou

Thank you for the comments on my own system. I particularly admire the hand percussion and the philodendron. Also, did you build the clones? If not, how did you gravitate towards them?

simao

Owner
This is my latest effort in assembling gears that I feel work together and it is by far, the most enjoyable system I have ever owned. Natural and involving!




 

toudou

Beautiful looking stereo system.  I am sure the tube magic matches very well with your speakers and creates a beautiful sound.

haimoc

Owner
System edited

The Tetras are one of those speakers that I've always wanted to own, and must admit that they do not disappoint. Amazing bass from a 4.5"woofer and I especially like their clean, detailed sound without being bright. 

The AVA UltraValve was another piece in my radar, and I'm also very pleased with the performance. 

Lastly, treating the room with RoomTunes should have been my number one priorities long ago. These soft pillow like devices have transformed my room for the better by taming down reflections bringing forth nuance, and details. Overall everything sounds more natural.

toudou

Owner
System edited: The Ushers came to me as a trade for my Tonians from a local
dealer. Can't beat local transactions, no shipping and I get to meet passionate
music lovers! Love the transparency and neutrality that those speakers exhibit.
Bass extension is truly phenomenal for a speaker that size. The Monarchy SM70
Pros were recommended to me by a reviewer from Stereo Times. Soon after,
placed a call and chatted with the designer, Mr. Poon. The rest is history. Great
little amps that displays amazing punch, yet sweetly detailed!

toudou

Yes it does. Thank you Toudou.

kevinkwann

Owner
Hello,

Sorry about the late response. I'm not quite sure about the wizard cone but the driver is the Fostex FE207E.

Hope this helps.

toudou

"Modification consists of the removal of the wizard cone"

Do you happen to know which wizard your cone was named for? TIA.

kevinkwann

Owner
Needfreestuff,

Thank you, I'm really enjoying it. May I also convey that your system is very impressive. The PBN Audio groove master is work of art.

toudou

Very well put together, I am sure it sounds special. Enjoy the holidays and thanks for posting.

needfreestuff

Owner
System edited: Acquired a Decware CSP2. Although I will miss the Eva 2 for its transparency and neutral sounding presentation, I much prefer the bold, and nuance quality that the CSP2 imparts. Joel Scilley of Audiowood: Analog Living sent along with the amp, a lovely frame made of recycled wine cask wood that he had personally made for himself. A sort of Zen quality that adds striking looks to the CSP2.

toudou

Owner
System edited: back to separates, and very happy with the
results.

toudou

David
Many thanks. Seemingly, there is no end to this affliction. You have got me thinking...
Best
Pradeep

sunnyboy1956

Owner
Hi Pradeep,

Yes, they are DH Labs Jumbo cones. I find that they breath a little more air, and ambience to the Wavac. I also have a set of Super under the cdp. At some point, I will transfer those under the Wavac for some comparisons.

Next, I will experiment with Mapleshade brass cones, and weights.

David

toudou

Toudou
Curious about the cones you have under the Wavacs, DH Labs, perhaps ? What improvements did you find with isolation under the Wavacs ?
Many thanks
Pradeep

sunnyboy1956

Owner
Hi Charles,

Thank you! I've always admired your system and I'm also a big fan of Coincident speakers, along with their amps.
You are correct with you assumption of the Wavac/Tonian pairing. The Tonians I find, are very engaging, accurate and brings forth all the wonderful attributes that the wavac has to offer.

I plan to acquire some brass weights, and cones from Mapleshade Records to further tune the system.

toudou

Hi Toudou,
Your system seems very well planed and coordinated. I'd believe that the Wavac SET and Tonian Lab pairing is exceptionally satisfying and reproduces music with emotion and life.
Charles,

charles1dad

Toudou
Many thanks. Am certainly going to try this.
Will keep you posted
Pradeep

sunnyboy1956

Owner
Sunnyboy1956,

Thank you for the kind remarks, I'm really enjoying the system. The Wavac has you pointed out, is exquisite and I've never owned an amp before that consistently weaved such an organic sound. My room is on the small side, so 15 watts is more than enough. The Tonian speakers with their 95db efficiency are also up for the task.

I've always wanted to try tube dampers and after some readings, I've discovered Herbie Audio Lab products. In place, I sensed that the music was more alive, a soundstage more stable, and more control on the bass.

By the way, your system is quite impressive, especially the HE833 V2. Congratulations!

toudou

Toudou
Congrats on a really well thought out system. I am sure the Wavac sounds exquisite. What are the tube dampeners you are using and do you find major improvements with them ?
Regards
Pradeep

sunnyboy1956

Showing 1 - 25 of 44 posts