Elan A2 2-Channel Power Amplifier Open Box W/ Free Shipping

This is an open box unit, it has never been used, installed, turned on ect.

The unit comes complete with free shipping in its original packaging (double boxing available upon request)

 Whether specifying the A2 in a home theater application or in a distributed audio system, this single rack-height amp provides enough power to handle the most inefficient freestanding speakers or a whole house full of in-walls.  The A2 amplifier will deliver 150 watts per channel into 2-Ohm loads. This high-current, low-impedance design eliminates the need for speaker selector boxes or load protection devices when driving up to three pair of 8-Ohm speakers. The ultra-high-efficiency toroidal transformer and 40,000uF bulk storage capacitance ensures that peak current demands are always met. This translates into exceptionally tight bass response and improved dynamic headroom. Buffered loop outputs allow routing of the stereo inputs to an additional power amplifier or surround sound processor without signal loss or degradation. Three pairs of gold-plated, five-way speaker binding posts make it easy to connect multiple speakers.  The remote trigger input mutes the amplifier when the preamp is turned off. Gain pots for each channel are accessible via the front panel.

Frequency Response20Hz to 20kHz -.5dBFull Power Bandwidth5Hz to 30kHzSignal to Noise>110dB (A-weighted)Channel Separation>70dB @ 1kHzTHD< 0.03%Intermodulation Distortion< -90dBVoltage Gain (Av)0 to 28, front panel adjustableInput Impedance33k OhmsRemote Trigger Input5-24V AC/DCTrigger Loop Output+12VDC @ 0.1AAC Power Requirements120VAC, 440WCurrent Draw3.7A @ 120VACA2 Dimensions(in.) 17 W x 2-1/4 H x 11 D, (mm) 432 W x 58 H x 280 DA2 Dimensions(in.) 19 W x 1-3/4 H x 11 D, (mm) 483 W x 45 H x 280 DWeight16 lbs/7.2 kg