McIntoshMC-352usedMcIntosh MC-352 350W x 2 Quad-Balanced Push-Pull Power Amplifier EX+++Selling my beautiful McIntosh MC-352 350Wx2 power amplifier, the best amp I have ever owned. Sadly, there isn't a place for it in our new house, otherwise, there's no way I'd ever let it go. I've n...3495.00

McIntosh MC-352 350W x 2 Quad-Balanced Push-Pull Power Amplifier EX+++

Listing ID: lis9a2jh Classified 
 Listed  · 1514 Views

10 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
9/10
Payment methods
Ships fromPiedmont, CA, 94611
Ships toUnited States
Package dimensions36.0" × 36.0" × 24.0" (150.0 lbs.)
Shipping carrierFedEx
Shipping cost
Log in to see price
Original accessoriesBox
AverageResearch Pricing

Selling my beautiful McIntosh MC-352 350Wx2 power amplifier, the best amp I have ever owned. Sadly, there isn't a place for it in our new house, otherwise, there's no way I'd ever let it go. I've never heard anything quite like it musically - it has the classic McIntosh sound people talk about. Plus, the blue dancing VU needles are fabulous. Hoping to find a good new home for it.

It is in 9/10 condition cosmetically and a 10/10 sonically! You may know, the MC352 is a quad-balanced (double-balanced) design with Mcintosh Autoformers. The THD is LESS than 0.005% at ANY power level from 250mW through 350W from 20-20khz! And the SNR is 124dBA (rated output, balanced input). And the frequency response is a ruler flat +0/-0.25dB from 20-20k (and the -3dB freq is 100kHz). Because of the impedance matching of the autoformer, the MC352 can produce the full 350WPC at 2, 4, or 8 ohms loads. Needless to say, it drove my B&W 802D towers easily!

I purchased it from a fellow Audiogon enthusiast several years ago. He had taken exceptionally good care of it, as did I.

Note: I could never get the remote turn-on feature to work (using the jack in the back), but the amp powers on/off just fine with power knob. Please keep this in mind if you need this feature.

Links:
Manual: http://www.berners.ch/McIntosh/Downloads/MC352_own.pdf
Positive Feedback: https://positive-feedback.com/nos/mcintosh-mc352-amplifier/

This amp is truly a statement piece. It weighs 105 lbs and is built like a tank. It will come in the original shipping carton (the amp is designed to be bolted to a wood base for transport), which is the only safe way to ship it, in my opinion.

I will take care of the paypal fees. Buyer to kindly pay for actual shipping/freight with insurance. I can only ship to your paypal confirmed address with signature required (sorry no exceptions, please don't ask). It's already boxed up, so no local demo's or pickups, sorry.

Also, please no buyers with 0 feedback on Audiogon.

Thanks for looking, and please feel free to reach out if you have any questions.

Specifications

Power Output Stereo
350 watts into 2, 4 or 8 ohm loads is the minimum sine
wave continuous average power output per channel both
channels operating.

Power Output Mono Parallel
700 watts into 1, 2 or 4 ohm loads is the minimum sine
wave continuous average power output.

Output Load Impedance
2, 4 or 8 ohms (Stereo Mode)
1, 2 or 4 ohms (Mono Mode)

Rated Power Band
20Hz to 20,000Hz

Dynamic Headroom
2.1dB

Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz

Total Harmonic Distortion
0.005% maximum at any power level from 250 milliwatts
to rated power per channel from 20Hz to 20,000Hz, all
channels operating.

Intermodulation Distortion
0.005% maximum if instantaneous peak output per channel
does not exceed twice the rated output with all channels
operating for any combination of frequencies from 20Hz to
20,000Hz.

Signal To Noise Ratio (A Weighted)
85dB Unbalanced (116dB below rated output)
115dB Balanced (124dB below rated output)

Sensitivity
1.9 Volts Unbalanced Input
3.8 Volts Balanced Input

Input Impedance
20,000 ohms Unbalanced
40,000 ohms Balanced

Damping Factor
Greater than 40

Dimensions
Front Panel: 17.50 inches (44.5cm) wide, 8.89 inches
(22.58cm) high. Depth behind front mounting panel is 21
inches (53.3cm) including clearance for connectors. Panel
clearance required in front of mounting panel is 1.125
inches (2.9cm).

Weight
105 pounds (47.63Kg) net, 138 pounds (63Kg) in shipping
carton

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.