McIntosh MC402 Power Amplifier - PENDING SALE

SALE PENDING...

Continuing the McIntosh tradition of innovation and exceptional performance, the MC402 is rated to deliver a hefty 400 Watts per channel in stereo or 800 Watts in mono. Its extraordinary, distortion-canceling, quad-differential design consists of four complete amplifier circuits, whose outputs are combined in the unique McIntosh-crafted autoformers.

About this product
Fantastic condition trade-in McIntosh MC402 Power Amplifier. Unit comes in original box and packing with owner’s manual and power cord.

Unit is rated 8/10 for minor cosmetic wear, including one small nick on the bottom-right edge of front (see photos).

SPECIFICATIONS

• Power Output Stereo: Minimum sine wave continuous average power output per channel, all channels operating is: 400 watts into 2 ohm load; 400 watts into 4 ohm load; 400 watts into 8 ohm load
  
• Power Output Mono Parallel: Minimum sine wave continuous average power output is: 800 watts into 1 ohm load; 800 watts into 2 ohm load; 800 watts into 4 ohm load
  
• Output Load Impedance: 2, 4 or 8 ohms (Stereo Mode) 1, 2 or 4 ohms (Mono Mode)
  
• Rated Power Band: 20Hz to 20,000Hz
  
• Total Harmonic Distortion: Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is 0.005%
  
• Intermodulation Distortion: Maximum Intermodulation Distortion if instantaneous peak output per channel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20,000Hz, with all channels operating is 0.005%
  
• Dynamic Headroom: 2.1dB
  
• Frequency Response: +0, -0.25dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 100,000Hz
  
• Sensitivity: 2.0 Volts Unbalanced Input 4.0 Volts Balanced Input
  
• A-Weighted Signal To Noise Ratio: 94dB Unbalanced (120dB below rated output) 98dB Balanced (124dB below rated output)
  
• Input Impedance: 10,000 ohms Unbalanced Inputs 20,000 ohms Balanced Inputs
  
• Wide Band Damping Factor: Greater than 40
  
• Power Requirements: 100 Volts, 50/60Hz at 12 amps 110 Volts, 50/60Hz at 11 amps 120 Volts, 50/60Hz at 10 amps 220 Volts, 50/60Hz at 5 amps 230 Volts, 50/60Hz at 5 amps 240 Volts, 50/60Hz at 5 amps Note: Refer to the rear panel of the MC402 for the correct voltage.
  
• Overall Dimensions: 17-1/2 inches (44.45cm) W, 9-7/16 inches (23.97cm) H, 20 inches (50.8cm) D, including clearance for connectors
  
• Weight: 110.5 pounds (50.1kg) net, 143.5 pounds (65.1kg) in shipping carton
  

Additional Information
Please call 734.662.3595 and ask for Richard if you have any questions about this product. We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.

For a complete listing of all of our specials, please visit: https://www.paragonsns.com/product-category/preowned-specials/