Audio Research D300 Solid State Amplifier

Audio Research D300 Solid State Amplifier

The D200, D300 and D400MKII use similar means to achieve a common goal of musicality at different power levels. In the case of the D200 and D300, the general circuit topology is identical with quantitative differences applying in power-supply energy storage and number of output devices (see specifications for details). The D400MKII, while largely similar in design, also has some features which are uniquely its own.

The D200 and D300 both employ a distributed-capacitor approach to bulk energy storage for the main supply; this means that a number of high-quality electrolytics are linked in parallel to provide the energy reserves necessary to reproduce clean transients and dynamic peaks of accurately-recorded music. This design approach results in lower E.S.R. (a distortion characteristic of capacitors) and lower impedance (quicker delivery of power to the output stage when need ed). The D400MKII, while using larger capacitors for more total energy storage, also incorporates a second power trans- former dedicated solely to supplying the input stage of the amplifier. This approach gives both the input stage and the main supply of the amplifier tremendous dynamic headroom the capability to cleanly deliver power in the face of demanding program material and low- impedance speaker loads.

The D200, D300 and D400MKII all use direct-coupled, high- current Multiple-Emitter Transistors (or METs) in their output stages (as well as for input-stage drivers). These devices have the rugged, high- heat, high-current capability of single emitter bipolar transistors (which can have a rougher, harder sonic character), but they also have a natural sweetness and musicality often associated with MOSFET transistors (which can be more fragile and prone to failure). In short, the METs deliver the best of both worlds. Each of these amplifiers has heat sinking specified to generously handle the dissipation requirements of its respective output stage, allowing safe, convenient in-cabinet installation if desired.

The D200, D300 and D400MKII each have both single-ended and balanced (XLR) input connectors, allowing easy connection to preamplifiers having either type of output. In addition, the D400 MKII offers a second set of inverting single-ended inputs, thereby allowing balanced operation in two different modes. Bridged mono operation, yielding substantially higher power output, is also possible with each of these three amplifiers, in either single-ended or balanced mode. Illustrated bridging instruction are included in the owner's manual for each model.

IntroducedSpecifications

BUYER PAYS SHIPPING. PLEASE NOTE THERE IS A 3% FEE FOR THE USE OF PAYPAL. WHEN PAYING VIA PAYPAL, PLEASE WAIT FOR A GRAND TOTAL WITH SHIPPING BEFORE SENDING FUNDS. ALSO NOTE THAT ANY OFFERS MADE, ARE PLUS SHIPPING and PayPal!

Hollywood Sound

Please visit our website: www.hwdsound.com
Hollywood Sound
has
been in business at the same location for 32 years.
We buy, sell,
trade,
consign, modify and service new and used high-end audio
equipment.
We are
authorized dealers for: Audioquest Dragonfly,Arum
Cantis Loudspeakers, Belles
(Power Modules), Bellari, Canalis Loudspeakers,
Charisma Audio MC-1 Cartridges,
Cayin, Creek Audio,Dali Loudspeakers,
Dynavector, Eminent Technology, Epos,
Exposure, Goldring, Grado Labs, J.A.
Michell, Lyra,Lehman Audio, Magnum Dynalab,
Music Hall, Naim, Nottingham
Analogue,Ortofon, Rega, Record Doctor, Rogue Audio,
Sound Anchor, Stax,
StraightWire, Tannoy, , Vampire Wire and Connectors, V.P.I.
Industries,
Wilson Benesch, Oracle,Benchmark Audio Systems,Vas Industries,Well
Tempered
Labs
ADDRESS:
Hollywood Sound
523 South 21
Ave.
Hollywood,
Florida 33020
Tel#
954-921-1408
Fax#
954-921-7739
[email protected]
WE ACCEPT ALL MAJOR
CREDIT CARDS
WE ALSO
SHIP WORLDWIDE

Power output160 watts per channel into 8 ohms, 300 watts per channel into 4 ohms.Power bandwidth(-3dB points) DC to 150 kHz into 8 ohms.Frequency response Input sensitivity1.9V RMS for rated output (25.7 dB gain) unbalanced or balanced.Input impedance150K ohms unbalanced, 300K ohms balanced differential.Output taps Output regulation0.07dB 8 ohm load to open circuitOverall negative feedback21dBDamping factor130Distortion Slew rate50V/µsRise time1.7 µsHum & noiseLess than 60 µV RMS (116dB below rated output IHF A-weighted)Power supply energy storage175,000 µF totalPower requirements105-125VAC 60Hz (210-250VAC 50Hz) 520 watts at rated output (165WPC 8 ohms), 890 watts at 300WPC 4 ohms, 1000 watts maximum, 200 watts idle.OtherInput Polarity: Non-inverting at unbalanced inputs. Balanced pin 2+ (IEC-268)Dimensions19" (48 cm) W (standard rack panel) x 7" (17.8cm) H x 12 7/8" (32.7 cm) D (front panel back). Handles extend 1½" (3.8 cm) forward of the 3/8" thick front panel. Output connectors extend 1" behind rear panel.Weight48 lbs. (21.8 kg) Net; 62 lbs. (28.1 kg) Shipping.