Emotiva XSP-1 Gen 2

We just received a nice Emotiva XSP-1 Gen 2 preamp on trade.  Unit is in extremely nice condition! We do NOT have the remote control for this unit, and thus the low price point we are listing it.  
Unit will ship in its original boxes with power cord and manual.

Audio Specifications

• Balanced Input to Balanced Output:
  S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 117 dB.
  Frequency response: 20 Hz to 20 kHz +/- 0.02 dB.
  THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0004%.
  IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%.
  Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB.

• Unbalanced Input to Unbalanced Output:
  S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 113 dB.
  Frequency response: 20 Hz to 20 kHz +/- 0.015 dB.
  THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0006%.
  IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%.
  Crosstalk (measured at +6 dBF, 10 kHz): < 102 dB.

• Balanced Input to Unbalanced Output:
  S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 114 dB.
  Frequency response: 20 Hz to 20 kHz +/- 0.015 dB.
  THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0005%.
  IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.0015%.
  Crosstalk (measured at +6 dBF, 10 kHz): < 105 dB.

• Unbalanced Input to Balanced Output:
  S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 115 dB.
  Frequency response: 20 Hz to 20 kHz +/- 0.017 dB.
  THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0003%.
  IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.007%.
  Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB.

• Phono (Moving Coil; phono in to balanced out):
  Gain (1 kHz, Volume at 0): approximately 60 dB.
  Input impedance (user selectable): 47 ohms, 100 ohms, 470 ohms, 1k ohm.
  S/N (signal-to-noise ratio, A-weighted, ref 1.0 mV in): > 79 dB.
  Frequency response (ref standard RIAA curve): 20 Hz to 20 kHz +/- 0.35 dB.
  THD (total harmonic distortion, ref 1.0 mV): < 0.008%.
  IMD (intermodulation distortion, SMPTE method: < 0.15 %.
  Crosstalk: < 65 dB.

• Phono (Moving Magnet; phono in to balanced out):
  Gain (1 kHz, Volume at 0): approximately 40 dB.
  Input impedance: 47k Ohms.
  S/N (signal-to-noise ratio, A-weighted, ref 10.0 mV in, A-weighted): > 96 dB.
  Frequency response (ref standard RIAA curve): 20 Hz to 20 kHz +/- 0.3 .dB.
  THD (total harmonic distortion, ref 10 mV): < 0.001%.
  IMD (intermodulation distortion, SMPTE method: < 0.05%.
  Crosstalk: < 80 dB.

Inputs And Outputs

• Line level Input: 2 pairs balanced; 4 pairs unbalanced.

• Home Theater (line level, left, right, sub) Input: 1 set balanced; 1 set unbalanced.

• Processor Loop (line level) Input: 1 pair unbalanced.

• Input Impedance (line level) Input: 50k ohms.

• Phono Input (MM or MC): 1 pair unbalanced.

• Main Outputs: 1 pair balanced; 1 pair unbalanced
  (Main outputs may be configured as flat or high-pass; 
  high-pass is adjustable from 50 Hz to 250 Hz).

• Subwoofer (left, right, summed) Output: 1 set balanced; 1 set unbalanced
  (Subwoofer outputs may be configured as flat or low-pass; 
  low-pass is adjustable from 50 Hz to 250 Hz).

• Processor Loop (line level) Output: 1 pair unbalanced.

• Minimum recommended load impedance: 600 ohms.

• Trigger Input and Output: 1 each.
  IR input and output: 1 each.

Trims And Adjustments

• Gain structure:
  Nominal output level: 0 dBV (1 V).
  Nominal gain (with Volume set to “0”): 1.
  Maximum gain: +12 dB.

• High-Frequency and Low-Frequency Trims:
  HF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 12 kHz.
  HF trim (inflection point): 4 kHz.
  LF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 50 Hz.
  LF trim (inflection point): 200 Hz.

• Bass Management:
  Crossover slopes (high-pass and low-pass): 12 dB / octave.
  Crossover frequency (high-pass and low-pass): User configurable, 50 Hz to 250 Hz.

Power Requirements

• Operating Voltage: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz
  (automatically detected and switched).
  Power consumption (On): 32 watts
  Power consumption (Standby): <1 watt

Mechanical

Dimensions:
17” wide x 6” high x 16-1/2” deep (unboxed; includes feet and terminals).
22″ wide x 19″ deep x 10″ high (boxed)

Weight: 29.0 lbs.

US sales only please.  NC residents plus sales tax.
Thank you! Taylor www.goldprintaudio.com
PS Audio —- Bryston —- Leben —- KEF -- Line Magnetic —- DeVore Fidelity -— Joseph Audio -- Rogue Audio -- VPI Industries -- Sugden —- Bel Canto -- Audio Desk -- Rega -- Kimber Kable -- Ortofon -- Chord Cables -- Quadraspire -- Salamander -- Torus Power —- Auditorium 23 —- Box Furniture —- Cary Audio — EMT — Parasound Halo — Marantz Reference