Denon AVR-X8500H SILVER - 13.2 Channel Receiver with Wi-Fi, Atmos, AirPlay 2, Auro 3D, Alexa and Heos

TAX MAY BE APPLICABLE IF PURCHASED FROM CERTAIN STATES.

Open box unit in unused/like new condition! This product comes with a full manufacturer's warranty (valid only in the United States). It has been fully tested by our team of audio/video experts, has the original box and includes all accessories. Our inspections are thorough so we can ensure you receive a product that you will love. Buy with confidence from an Authorized Denon Dealer!

Feel free to contact ListenUp Warehouse Deals at [email protected] with any questions. If you prefer to call, our direct number is 303-756-1841, and hours are 9am-4pm MST, Monday-Friday. 

Below are links to our other online stores:

http://www.ebaystores.com/listenupwarehousedeals

https://www.amazon.com/s?me=A2H3DYB5PUVNNI&marketplaceID=ATVPDKIKX0DER

https://www.listenup.com/shop/warehouse-deals.html

Power and Processing:

• 13-channel amplifier

• 150 watts per channel into 8 ohms (20-20,000 Hz) at 0.05% THD, with 2 channels driven

• Dolby® and DTS® surround sound decoding

• Dolby Atmos processing for use with in-ceiling or "height" speakers for more enveloping surround sound

• supports a range of Atmos configurations, including 9.2.4 and 7.2.6

• DTS:X for an immersive, 3-dimensional soundstage

• Auro-3D® built-in for three-dimensional soundfields with Auro-3D soundtrack mixes (supports up to a 13.1-channel configuration; future firmware update required)

• analog-to-HDMI video conversion

• upscales standard-definition video signals to HD and Ultra HD (up to 4K)

• Audyssey Platinum speaker calibration and system optimization includes:

• MultEQ® XT32 auto setup and room calibration delivers balanced, dynamic sound with enhanced surround performance for as many as eight seating positions

• Dynamic Volume anticipates loud sounds to keep volume levels even

• Dynamic EQ improves dialogue, bass response, and surround channel levels at lower volumes

• Sub EQ HT provides individual calibration for dual subwoofers, for even bass response throughout the room

• Low Frequency Containment reduces the amount of bass that bleeds into other rooms

• Audyssey MultEQ Editor app for further audio customization (paid app; not included)

Digital and Streaming Music Options:

• built-in Wi-Fi for listening to music from a networked PC and free internet radio

• includes support for TuneIn

• built-in HEOS technology wirelessly connects compatible HEOS components for whole home audio

• includes support for Pandora®, SiriusXM, and Spotify® (subscription required for some services)

• free HEOS app offers easy Wi-Fi control, settings adjustments, and music selection and playback

• works with Amazon Alexa-compatible voice control assistants

• Apple AirPlay 2 lets you stream directly from an iPhone® or iPad® and ask Siri to play Apple Music

• supports multi-room audio with compatible wireless speakers

• built-in Bluetooth® for wireless music listening with smartphones, tablets, and compatible computers

• plays high-resolution digital music files via USB storage device or a networked computer (PCM up to 24-bit/192kHz resolution; DSD up to 5.6 MHz)

• Denon's Compressed Audio Restorer improves sound quality of MP3s and other digital music files

Multi-room Audio/Video:

• three-room/three-source output

• powered stereo outputs for second and third rooms allow playback in three rooms at once

• amp assign feature lets you reassign extra surround channels to second and third zones

• line-level outputs for Zones 2 and 3 for use with additional receiver, amplifier, or powered speakers

• independent HDMI outputs for watching video content from different sources in two zones simultaneously

• supports 2nd/3rd zone playback of digital sources

• composite video output can be assigned to Zone 2

Connections:

• HDMI audio/video switching: 8 in (includes 1 front-panel input), 3 out

• HDCP 2.2 technology ensures compatibility with 4K Ultra HD sources and TVs (all HDMI inputs and outputs)

• HDR-compatible for extended picture contrast and brightness with compatible 4K TVs and HDR-encoded content

• supports Dolby Vision™

• supports eARC with firmware update

• component video switching: 3 in, 1 out (Zone 2)

• composite video switching: 4 in, 2 out (includes 1 front-panel input)

• digital audio inputs: 2 optical, 2 coaxial

• 6 analog stereo RCA audio inputs

• MM (moving magnet) phono input for connecting a turntable

• 7.1-channel preamp inputs

• 13.2-channel preamp outputs

• two discrete line-level subwoofer outputs for more precise multi-subwoofer setups

• front-panel USB port for audio playback from USB flash drives

• Denon Link HD creates a jitter-free connection to compatible Denon Blu-ray players; requires HDMI connection and proprietary Denon Link RCA-style cable

• Ethernet port for network connection

• outputs for 15 speakers (Front L/R, Center, Surround L/R, Surround Back L/R, Height 1 L/R, Height 2 L/R, Height 3 L/R, Height 4 L/R)

• receiver can power a maximum of 13 channels at once

• RS-232C port for use with external controllers

• IR in/out and 12-volt triggers

• 1/4" headphone jack

• removable power cord

General Features:

• 4K/60p and 3D video pass-through

• Setup Assistant guides you through the initial connection process and settings

• 4 quick select function buttons for one-touch power-up, source selection and recall of volume and Audyssey configuration

• HDMI standby pass-through allows HDMI switching without powering up receiver

• support for third-party control systems by Control4 for home automation

• intuitive, full-color on-screen guide

• bi-amp compatible front left and right speakers by reassigning Surround Back or Height channels

• AM/FM tuner

• remote control

• 17-1/8"W x 7-3/4"H x 18-3/4"D

• weight: 39.24 lbs.

• warranty: 3 years

Audio Section

Monolithic Amplifier Design: The Denon AVR-X8500H AV receiver is built to last and delivers audiophile-grade sound thanks to its monolithic amplifier construction. The Denon AVR-X8500H features a powerful Class AB power amplifier section equipped with discrete custom-made high current power transistors (D.H.C.T) for high current capability. This discrete, monolithic amplifier design delivers optimum realism and stunning dynamic range. By using high current, high power discrete power devices and a monolithic amplifier layout, the Denon AV receiver is able to easily drive high quality speakers. The AV receiver's eleven channel Class AB amplifier is rated at 150-watts (into 8-ohms, at 20-20kHz, with 0.05% THD, driving 2 channels) and will deliver reference class, room-filling sound with astonishing clarity, power, detail, and depth.

Amplifier Assignment: The AVR-X8500H's thirteen discrete amplifier channels can be configured to accommodate your type of home theater setup - from a 7.2ch system with two powered zones to a full 9.2.4ch Dolby Atmos setup.

• 13ch: Provides 13ch playback by assigning all thirteen internal amplifiers to the receiver's Main Zone. Front, Center, Surround, Surround Back, Height 1, Height 2, Height 3 speakers can all be played back at the same time in the Main Zone. This amplifier configuration can support up to 7.2.6ch or 9.2.4ch Dolby Atmos/DTS:X.

• 11ch Bi-Amp: Assigns all thirteen amplifiers of the receiver to the Main Zone with the front speakers bi-amped. Up to eleven total speakers are be connected at one time - including Front, Center, Surround, Surround Back, and Height 1/2 speakers. The receiver's Height 3 amplifier channels are assigned to bi-amp the front speakers. A bi-amplification connection uses two amplifiers for one speaker. One amplifier is connected to the woofer section of a loudspeaker while the other is connected to the combined midrange and tweeter section. With this arrangement each amplifier operates over a limited frequency range, making its job easier. This amplifier configuration can support up to 7.2.4ch or 9.2.2ch Dolby Atmos/DTS:X.

• 11ch + Zone 2 or Zone 3: The receiver's thirteen amplifier channels are assigned to power a 11ch speaker system in the Main Zone and stereo speakers in either Zone 2 or Zone 3 (not both). The Main Zone will consists of Front, Center, Surround, Surround Back and Height 1/2 speakers. The receiver's Height 3 amplifier channels are assigned to power Zone 2. This amplifier configuration can support up to 7.2.4ch or 9.2.2ch Dolby Atmos/DTS:X.

• 11ch + Zone2/3-Mono: Assigns eleven of the amplifier channels of the AV receiver for 11ch playback in the Main Zone and one amplifier each to Zone 2 and Zone 3 for mono audio in each zone. The Main Zone will consist of Front, Center, Surround, Surround Back and Height 1/2 speakers. The receiver's Height 3 amplifier channels are assigned to power both Zone 2 and Zone 3 for mono sound. This amplifier configuration can support up to 7.2.4ch or 9.2.2ch Dolby Atmos/DTS:X.

• 11ch + Front B: Assigns eleven amplifier channels of the receiver to the Main Zone for up to 11ch playback and two amplifier channels to power another pair of front speakers in the Main Zone for stereo playback only. This is useful when you want to have a dedicated pair of 2ch speakers, in addition to your home theater speakers. If you choose to play the Front A and Front B speakers at the same time, Front B will play the same exact audio source and audio signal as Front A without down-mixing. Up to thirteen total speakers can be connected in the Main Zone - including Front, Center, Surround, Surround Back, Height 1/2, and Front B speakers. The receiver's Height 3 amplifier channels are assigned to power the Front B speakers. This amplifier configuration can support up to 7.2.4ch or 9.2.2ch Dolby Atmos/DTS:X.

• 9ch + Zone 2/3: Assigns nine amplifier channels to the Main Zone for 9ch playback and four amplifiers to Zone 2 and Zone 3 for stereo playback in each zone. The 9ch system will consists of Front, Center, Surround, Surround Back, and Height 1 speakers. The receiver's Height 2 & 3 amplifier channels are reassigned to power both Zone 2 and Zone 3. This amplifier configuration can support up to 5.2.4ch or 7.2.2ch Dolby Atmos/DTS:X.

• 9ch Bi-Amp + Zone 2: Assigns eleven amplifiers of the receiver to the Main Zone with the front speakers bi-amped and two amplifier channels assigned to Zone 2 to power a pair of speakers in another room. The 9ch system will consists of Front, Center, Surround, Surround Back, Height 1 speakers. The receiver's Height 2 & 3 channels are reassigned to bi-amp the front speakers and power Zone 2. This amplifier configuration can support up to 5.2.4ch or 7.2.2ch Dolby Atmos/DTS:X.

• 5.1ch Full Bi-Amp: In this mode you can bi-amp the front, center, and surround speakers for improved sound quality with bi-amp capable speakers in a traditional 5.1 layout. Dolby Atmos, DTS:X, AURO-3D not supported with this configuration. Zone 2 & Zone 3 are only available using pre-outs with separate amplifiers.

Note: The receiver's Height 1, 2, 3, & 4 amplifier speaker channels in a 11ch, 9ch, or 7ch amplifier configuration can be configured as Top Front, Top Middle, Top Rear, Front Dolby, or Surround Dolby for Dolby Atmos or DTS:X.

Advanced Sound Processing: The Denon AVR-X8500H AV receiver offers advanced sound processing so you can experience extraordinary sound quality from both music and movies.

• 32-Bit DACs: For optimum fidelity and the widest dynamic range with lowest distortion, the AVR-X8500H features advanced reference-class 32-bit AKM AK4490EQ D/A converters on all channels. This ensures consistent high fidelity and precise channel matching across all channels for the ultimate listening experience.

• AL32 Processing: AL32 Processing Multi-channel provides ultra-high-resolution digital audio filtering and precision for all audio channels, to deliver a natural soundstage with enhanced imaging. You'll enjoy outstanding high-frequency detail, along with smooth midrange and accurate bass.

• Quadruple DSP: The AVR-X8500H utilizes a sophisticated DSP audio processing system that incorporates no less than four powerful high speed fourth generation SHARC DSP processors, which together have a combined continuous processing capability of 10 GFLOPS (10 billion floating point numerical computations per second).

Clock Jitter Reducer + Denon Link: The AVR-X8500H is equipped with a "Clock Jitter Reducer" that is capable of reducing jitter and phase noise that negatively affect sound quality. The "Clock Jitter Reducer" provided with this unit improves the sound localization, reproducing a natural sound field that is closer to the original soundtrack. The exclusive Denon Link HD system, available when the AVR-X8500H is used with a compatible Denon Blu-ray player (sold separately), creates a high-accuracy digital link, with a dedicated connection for master clock data to eliminate distortion caused by jitter errors in the main audio data-stream.

Compatible Digital Audio Formats: The AV receiver supports the following stereo & multichannel digital audio formats through its HDMI jacks and optical/coax digital inputs.

Digital Audio Connector

Audio Signal Type

Audio Signal Format

HDMI

2Ch Linear PCM

2ch, 32-192kHz, 16/20/24-bit

Multichannel Linear PCM

8ch, 32-192kHz, 16/20/24-bit

Bitstream

Dolby Digital, Dolby Digital EX, DTS, DTS ES, DTS 96/24

High Definition Audio Bitstream

Dolby Atmos, Dolby Digital Plus, Dolby TrueHD, DTS:X, DTS-HD Master Audio, DTS-HD High Resolution, DTS Express

Optical/Coaxial

2Ch Linear PCM

2ch, 32-96kHz, 16/20/24-bit

Multichannel Linear PCM

6ch, 32-96Hz, 16/20/24-bit

Bitstream

Dolby Digital, Dolby Digital EX, DTS, DTS ES, DTS 96/24

Immersive Surround Sound: The Denon AVR-X8500H AV receiver goes beyond regular surround with the latest immersive surround sound formats, including Dolby Atmos, DTS:X, & AURO-3D.

• Dolby Atmos: Dolby Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the soundtrack designer the ability to precisely place sounds anywhere in the 3-dimensional space. Now you can enjoy this same award-winning technology at home with the AVR-X8500H that lets you to connect a 5.2, 7.2, or 9.2 surround sound speaker system and 2-6 additional overhead speakers or 2-6 Dolby Atmos elevation speakers for the ultimate home theater experience.

• 5.2.2ch to 5.2.6ch: A 5.2.2 configuration is based on a traditional 5.2 speaker layout complemented by 2 overhead or Dolby Atmos-enabled speakers. A 5.2.4 configuration is based on a traditional 5.2 speaker layout complemented by 4 overhead or Dolby Atmos-enabled speakers. A 5.2.6 configuration is based on a more advanced 5.2 speaker layout complemented by 6 overhead, or Dolby Atmos-enabled speakers.

• 7.2.2ch to 7.2.6ch: A 7.2.2 configuration is based on a more advanced 7.2 speaker layout complemented by 2 overhead or Dolby Atmos-enabled speakers. A 7.2.4 configuration is based on a more advanced 7.2 speaker layout complemented by 4 overhead, or Dolby Atmos-enabled speakers. A 7.2.6 configuration is based on a more advanced 7.2 speaker layout complemented by 6 overhead, or Dolby Atmos-enabled speakers.

• 9.2.2ch to 9.2.4ch: A 9.2.2 configuration is based on a more advanced 9.2 speaker layout complemented by 2 overhead or Dolby Atmos-enabled speakers. A 9.2.4 configuration is based on a more advanced 9.2 speaker layout complemented by 4 overhead, or Dolby Atmos-enabled speakers.

• DTS:X: The receiver is equipped with DTS:X decoder technology. DTS:X brings the home theater experience to new heights with its immersive object based audio technology which removes the bounds of channels. The flexibility of objects allows for sound to be scaled large or small and moved around the room with greater accuracy than ever before leading to a richer immersive audio experience.

• AURO-3D: This receiver is equipped with an Auro-3D decoder. With Auro-3D, Front Height, Surround Height and Top Surround are added to a conventional 5.1-channel system to achieve a natural and realistic soundfield that is three-dimensional and fully immersive. You will be able to fully enjoy Auro-3D playback if you properly place the speakers for Auro-3D. Auro-3D does not support a Dolby Atmos configuration using Top Front, Top Middle, Top Rear, or any Dolby Atmos Enabled speakers. But it is possible to support both an Auro-3D and Dolby Atmos by adding Front Height and Rear Height speakers to a 5.1 configuration. For an optimum Auro-3D experience Surround Height speakers are strongly recommended.

Post Decoding Formats: The Denon AV receiver supports Dolby Surround & DTS Neural:X to enhance 2-channel and multichannel decoding formats.

• Dolby Surround: Dolby Surround offers an enhanced cinema experience to your 2ch and multichannel movie soundtracks using your existing 5.1ch, 7.1ch or Dolby Atmos speaker setup. Dolby Surround enhances audio definition by improving the spatial dimension and overall audio definition of movie soundtracks. It does this by using four distinct surround zones that provide greater control over the exact placement of each detail in a movie sound track, so audio can be matched more accurately to the video on screen; this means more depth and greater realism for your movies. As a result, individual sounds are clearer and more distinct. It also improves the surround sound experience across the entire theater by widening the listening "sweet spot".

• DTS Neural:X: DTS:X incorporates Neural:X, the latest spatial remapping technology from DTS, which provides a fully immersive output for all types of source content; this includes DTS bitstreams and non-encoded (PCM) data. Neural:X delivers a thrilling sense of immersive sound to your speaker layout regardless of the original source format.

IMAX Enhanced Technology (Firmware Update Scheduled for October 2018): Get the most premium at-home entertainment experience with IMAX Enhanced; the latest technology program from IMAX that sets a new standard for image, sound, scale and content quality. This new certification and licensing program combines IMAX digitally re-mastered 4K HDR content and DTS audio technologies to offer a new level of quality in immersive sight and sound experiences in the home. IMAX Enhanced lets you experience premium content digitally remastered by IMAX, so you can watch the highest-quality 4K movies with immersive audio delivered by DTS. Not only will IMAX Enhanced content look and sound amazing, but other audio/video content will also look and sound great too.

• Remastered 4K/HDR Video: It utilizes a sophisticated, advanced algorithm designed to produce the highest-quality, sharpest 4K HDR images. This advanced process accurately reduces noise and grain under the filmmaker's guidance to best optimize the content for a much higher quality, higher brightness 4K HDR display format. Select IMAX Enhanced titles that were shot with IMAX cameras or specially formatted for IMAX theatres will also include an expanded aspect ratio for the film's home release to show your more picture on your TV. IMAX Enhanced certified TVs must be at least 65" with support for HDR10 and dynamic, as well as specific calibration, resolution, color, brightness, contrast, and scale of image capabilities.

• Remastered DTS:X Audio: IMAX and DTS will also partner with award-winning Hollywood sound mixers to use a special variant of its DTS:X codec technology integrated in home audio equipment to deliver an IMAX signature sound experience that is dynamic, immersive, theatrical, and powerful. IMAX Enhanced supports both 5.1 and 11.1 formats, but the recommended speaker layout for an IMAX Enhanced system is 7.2.4 with seven horizontal speakers, two subwoofers and four height speakers; 5.1.4 is the minimum layout for IMAX Enhanced. However, due to various constraints you may opt to install only a 5.1ch speaker system. In such cases, DTS Virtual:X is required to properly render and remap audio to the available speakers.

• Available IMAX Content: IMAX is working with its global studio and other content partners to build a steady stream of IMAX Enhanced versions of movies and other programming using the newest, proprietary post-production process developed by IMAX. IMAX will be announcing and releasing IMAX Enhanced versions of a wide range of films both for 4K/HDR streaming and Ultra HD Blu-ray Discs.

Notes:

• To take full advantage of IMAX Enhanced, you need an IMAX Enhanced certified 4K/HDR TV (65"-up) or Projector and an IMAX Enhanced certified DTS:X enabled AV receiver or soundbar.

• IMAX and DTS developed the IMAX Enhanced program out of their decades of combined expertise in image and sound science to make it easier for consumers to select the products and content that will deliver the highest-quality, sharpest 4K HDR images and powerful, immersive sound at home.

• To qualify and carry the IMAX Enhanced logo, the highest-end TVs, AV receivers, projectors, sound bars, and must meet stringent performance standards established by IMAX, DTS and Hollywood's leading colorists in order to create a consistent and higher bar for image and sound performance on premium devices.

Audyssey Platinum: The AVR-X8500H features the Audyssey Platinum suite of powerful DSP features - including MultEQ XT32, Sub EQ HT, LFC(Low Frequency Containment), Dynamic Volume, and Dynamic EQ.

• MultEQ XT32: Via the supplied measuring microphone, Audyssey MultEQ32 measures all the speakers in your home theater during setup, including the subwoofer, and then generates multiple high precision DSP room acoustic correction filters, which together provide the smoothest and most natural tonal balance, regardless of the brand or model of the various speakers. Audyssey MultEQ32 incorporates more than ten thousand individual control points allowing finer details of the room's problems to be captured and corrected. Up to eight listening positions can be measured, configured, and recorded. MultEQ XT32 compensates for both time and frequency characteristics of the listening area based on "Audyssey Setup" measurement results. Selection is done from three types of compensation curves - Reference (default and recommended, L/R Bypass, Flat, and Off).

• Sub EQ HT: Audyssey Sub EQ HT provides individual DSP tailoring of each subwoofer in a dual subwoofer setup, for deeper bass with improved definition, compared to a single subwoofer configuration.

• LFC (Low Frequency Containment): Audyssey Low Frequency Containment uses advanced psychoacoustic algorithms to deliver a full range tonal balance, including deep bass, but without disturbing close-by neighbors or family members in other rooms, and features a multi-step adjustment that lets you dial in the amount of containment to your preference.

• Dynamic Volume: Audyssey Dynamic Volume features advanced psycho-acoustic processing to deliver clear dialog and wide range sound at reduced volume levels so that you can enjoy theater-level clarity at whatever listening level you choose.

• Dynamic EQ: Audyssey Dynamic EQ also features advanced DSP processing to deliver full range wide-band response, even at reduced volume levels. Dynamic EQ Reference Level Offset provides three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard.

Listening Modes: You can choose between a variety of Denon Original listening modes or two Direct modes.

• Denon Original Listening Modes: Denon's Original Listening Modes, combined with Dolby Digital/DTS processing, produce more realistic, powerful sound effects for your movie and music sound tracks based on the type of content and your home theater setup. Choose between Rock Arena, Jazz Club, Matrix, Video Game, Mono Movie, Multichannel Stereo, or Virtual (surround from only front speakers or headphones).

• Direct Listening Modes: The Denon AVR-X8500H offers two Direct Listening Modes which bypass the receiver's tone & DSP processing for higher sound quality performance. Direct Mode provides playback of 2ch or Multichannel audio in its original form, without any surround or tone processing. Pure Direct Mode goes a step further by turning off the receiver's display and analog video circuitry to minimize the possibility of any noise being added to the audio signal.

Audio Enhancements: The Denon AVR-X8500H receiver provides various audio enhancements to deliver a high-quality listening experience every time.

• CINEMA EQ (Cinema Equalizer): The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers is too bright. This function only works in the Dolby Digital & DTS modes.

• Compressed Audio Restorer: Compressed audio formats such as MP3, WMA (Windows Media Audio), and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The Restorer function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals.

• Dynamic Range Compression (DRC): Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud sounds). For listening late at night, or whenever the maximum sound level is lower than usual, Compressing the dynamic range allows you to hear all of the sounds in the soundtrack with reduced dynamic range. DRC works when playing program sources recorded in Dolby Digital or DTS.

• Center Spread: When using the receiver's Dolby Surround mode, the Center Spread function expands the center channel signal to left and right front speakers to create a wider frontal audio image for the listener. It is optimized and designed primary for playback of stereo music content.

• Room Size: The receiver's audio output can be set to simulate the acoustics of a Small, Medium Small, Medium (default), Medium Large, or Large room environment. This setting is not an indication of the actual size of your listening area.

• Bass Sync: For contents recorded in multi-channel such as Blu-ray discs, the recorded low frequency effects (LFE) may be out of synch and delayed. Bass Sync technology corrects such a delay of low frequency effects for the perfect audio experience.

ARC + eARC (via available Firmware Update): ARC (Audio Return Channel) allows the receiver's HDMI monitor output allows audio to be sent from your compatible HDTV to the receiver through the same HDMI cable already being used to send audio and video to your HDTV. This eliminates the need for extra cables connected to your television. The receiver will also support eARC (Enhanced Audio Return Channel) via an available firmware update. eARC will support uncomprerssed audio formats like Dolby TrueHD, Dolby Atmos, DTS:X, & DTS HD Master Audio - where standard ARC was limited to Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

Level Adjustments: The AVR-X8500H provides the following level adjustments.

• Source Level: This function adjusts the playback level of the currently selected input source's audio input. Use this feature if there are differences in the input volume levels between different sources. You can correct the playback level of the audio input from -12 to +12dB.

• Dialogue Level & Control: You can adjust the output level (+/-12dB) to increase the dialogue output from the center channel. When listening to a DTS:X soundtrack, the Dialog Control feature adjusts the volume of dialog in movies and vocals in music, so voice can be heard more easily.

• EQ Level: If you choose not to use the Audyssey MultEQ X32 auto calibration setup function, you can manually set the tonal balance and level for each frequency band of the receiver's 9-band EQ (63/125/250/500/1k/2k/4k/8k/16k Hz) for each connected loudspeaker.

• Subwoofer Level: You can set the receiver's subwoofer output level (+/-12dB) independent from the other speaker levels and system's main volume.

Volume Settings: The AVR-X8500H offers the following volume settings.

• Volume Scale: You can choose to display an Absolute volume scale (0-98) or Relative volume scale (-79.5 to 18dB).

• Volume Limit: You can set a maximum volume level of 0, -10, or -20 dB to limit the receiver's total volume output.

• Power On Level: You can define the volume setting that is active when the power is turned on (0, 1-98, -79 to +18dB, or Last).

• Mute Level: You can set the amount of attenuation for the audio muting circuit; -40dB or -20dB below current volume, or full mute (sound turned off entirely).

Audio Outputs: The Denon AV receiver features color-coded binding-post speaker terminals, 11.2ch pre-outs, and a front-panel headphone jack.

• Color-Coded Speaker Terminals: The receiver has binding-post terminals for all speaker connections. The binding-post terminals can accept bare wire, pin connectors, and banana plugs (single/dual). The receiver will accept speaker impedances of 4 to 16-ohm. The AV receiver comes with color-coded labels to easily identify which channel a speaker cable should be connected to. Since the speaker cables have labels in the same colors as the connectors on the AVR-X8500H's rear panel, there's no longer any confusion about which terminals they should be connected to.

• 15.2Ch Pre-Outs: The AV receiver features 15.2ch pre-amp outputs (Front L/R, Center, Surround L/R, Surround Back L/R, Height 1 L/R, Height 2 L/R, Height 3 L/R, Height 4 L/R, and Dual Subs) for connection to external power amplifiers. The pre-outs are variable. For compatibility with dual subwoofer home theater systems, the AVR-X8500H features two discrete subwoofer outputs. With dual subwoofers, which can be placed in different parts of the room, you'll benefit from response averaging, which helps provide smoother and more detailed deep bass, compared to a conventional single subwoofer speaker system.

• Headphone Jack: When headphones are plugged into the full-size 1/4" jack on the front panel, all the speakers are automatically muted.

Phono Input: The Denon AVR-X8500H is outfitted with a Phono input (MM), so you can connect your turntable and listen to your vinyl records with high-quality sound.

Video Section

HDMI 2.0b: Featuring eight HDMI inputs (including one conveniently located on the front-panel) and three HDMI outputs, the AVR-X8500H incorporates an advanced video section that features the latest HDMI 2.0b specification, including support for 4K/60 Hz Ultra-HD video, BT.2020 Wide Color Gamut, High Dynamic Range (HDR), 4:4:4 Pure Color sub-sampling and 21:9 video pass-through, along with support for 3D content. The AVR-X8500H also features HDCP 2.2 compatibility, a requirement for 4K Ultra HD copy-protected content.

• 4K/60Hz Pass-Through: The AVR-X8500H supports up to 4K (3840x2160 pixels) video @ 60 frames per second on all of its HDMI inputs and output (pass-through only). It will also pass a 480i, 480p, 720p, 1080i, or 1080p video signals via HDMI.

• HDCP 2.2: All of the receiver's HDMI jacks support HDCP 2.2, which fully complies with the latest copyright protection standard for 4K video transmission.

• 4:4:4 Color Subsampling: All of the receiver's rear-panel HDMI jacks support RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0 color subsampling (@ 60Hz or 50Hz). With 4:4:4 color subsampling, luminance (brightness) and chroma (color) are sampled at the same rate; resulting in an RGB color palette as big as the video sampling rate for a video image with more colors, plus greater color accuracy and detail. The front-panel HDMI only supports 4K 60/50Hz using format YCbCr 4:2:0 only.

• Wide Color Gamut (BT.2020): The BT.2020 color standard delivers a much wider color gamut and represents about 75% of the total visual color spectrum, while the current Rec. 709 color standard selected as the color space for HDTVs and early generation 4K Ultra HDTVs covers only 35% of the total visual color spectrum.

• 21:9 Aspect Ratio: By supporting 21:9 aspect ratio, this receiver can show films recorded in the Cinema Scope format on your TV for a much more immersive video experience. When these types of films are viewed in the usual 16:9 ratio, you see black bars at the top and bottom of the screen; 21:9 eliminates these bars.

HDR Compatibility: HDR provides enhanced picture quality by simultaneously enabling greater detail for both the dark and bright parts of an image. HDR reproduces a greater dynamic range of luminosity or brightness levels, creating greater contrast. This increased contrast reveals the subtle nuances of the image, from detailed blacks and shadows to the brightest whites and colors, plus greater depth. The receiver supports HDR 10, Dolby Vision, and HLG.

• HDR 10: HDR 10 is an open standard and currently the most popular HDR format on the market. It supports 10-bit color and 1,000 nits. It uses static metadata at the start of a movie to tell the receiver and your TV that the video content is encoded using HDR.

• HLG: HLG (Hybrid-Log Gamma) is primarily designed for live video feed and over-the-air broadcasts. It uses no pre-encoded metadata and is backwards compatible with SDR. HLG's native compatibility allows much of today's existing SDR infrastructure to be re-used for HDR in the future.

• Dolby Vision: Unlike HDR 10 which contains static metadata and HLG which uses no metadata, Dolby Vision utilizes dynamic metadata which adjusts brightness, color, and contrast automatically for each scene. Dynamic metadata carries information that maps every image to your TV's display capabilities, so you see more of what the content creator intended. Dolby Vision supports 12-bit color and 10,000 nits.

4K Video Upconversion & Upscaling: The Denon AV receiver's sophisticated video processor provides upconversion from standard definition (480i/480p) and high definition (720p/1080i/1080p) sources to 4K Ultra HD (3840x2160 pixels), which lets you connect all your analog (composite/component) or digital (HDMI) video sources to the AVR-X8500H and then connect to your TV with just a single HDMI cable. Only the receiver's main HDMI output supports video upconversion.

Note: When composite or component video signals are used, only 480i video signals are converted to HDMI (up to 4K).

Three HDMI Outputs: The two parallel HDMI outputs distribute the same video signal simultaneously to two separate displays, while the discrete HDMI output allows you to play a different audio/video source in another zone (Zone 2).

HDMI Standby Pass-Through: When the AV receiver is in "Standby" mode and the HDMI Standby Pass-Through function is enabled, both audio/video streams from the receivers HDMI input will be output to your television, via the AV receiver's HDMI monitor output. Once the receiver is turned "On", only video will pass through the monitor output to your TV and the audio is directed to the receiver's speaker outputs.

• HDMI Input: Selects the HDMI Input for which the HDMI Standby Pass-Through function is enabled.

• Last: The HDMI Standby-Through function is activated on the input source selected at the time of setting the AV receiver to the "Standby" mode.

• Off: The HDMI Standby Pass-Through function is disabled.

Other HDMI Features: The Denon AVR-X8500H AV receiver's HDMI connectivity also offers 3D video pass-through, Deep Color & x.v.Color support, as well as an auto LipSync function.

• 3D Ready: The AVR-X8500H AV receiver supports 3D video pass-through (720p/1080p only) from connected 3D-compatible Blu-ray, games and broadcast devices to 3D-compatible HDTVs (all 3D components must be connected via HDMI). Special eyewear will be required for viewing 3D content.

• Deep Color & x.v.Color Support: The AV receiver supports Deep Color and x.v.Color content, which can display a larger color range than standard-definition schemes. The result is a more lifelike, vibrant picture.

• LipSync: This function adjusts the delay between audio and video output. You can do this manually or have the receiver set the LipSync function automatically. When connected to a TV via HDMI the receiver automatically adjusts audio output timing (0-500ms) if the TV supports an automatic LipSync function. You can also manually delay the sound output up to 500ms to synchronize it with the video image.

Component & Composite Video: The receiver features four composite video inputs and one composite video output, as well as a Zone 2 composite video output (the composite video inputs/output support 480i only). There are also three component video inputs and one component video output that can be assigned as a monitor output or Zone 2 output (the component video inputs/output support up to 1080p).

Video Select Function: This receiver can display video from a different source on your connected TV during audio playback from Tuner or HEOS music apps.

Video Modes: You can set the video processing method to match the type of video content. Choose from Movie, Game, Auto, or Bypass.

Advanced ISFccc Video Calibration: The AVR-X8500H is certified by the Imaging Science Foundation to deliver top video quality, and the unit also features advanced ISFccc video calibration controls that allow for precision fine-tuning of the connected HDTV, even if it's not an ISF certified set. You can choose from a variety of Picture Modes - Standard, Movie, Vivid, Streaming, ISF Day, ISF Night, Custom, or Off. The Custom mode lets you manually adjust Contrast, Brightness, Saturation, Noise Reduction, and Enhancer (sharpness).

Network & Tuner Functions

Wired or Wireless Network Connection: The Denon AVR-X8500H receiver is fitted with a RJ-45 Ethernet (LAN) port to connect the receiver to your home network. The unit also offers built-in WiFi (IEEE 802.11 a/b/g/n; 2.4/5GHz) for a wireless network connection; WPS, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES) security protection is supported. Either network connection gives the receiver access to HEOS music apps (like Pandora, Spotify, Tidal, etc), TuneIn, your music library on your Apple iOS or Android device, as well as music content on your Windows PC or DLNA music server. Wireless network setup can be done via WPS button, Access Point Scan, Manual Setting, PIN Code, or even through your Apple iOS device (5.0+).

Note: Network setup requires that the receiver be connected to your TV via HDMI for display of the on-screen menu. The receiver's network setup cannot be accessed through its front-panel display.

TuneIn Internet Radio: The Denon AVR-X8500H includes access to more than 100,000 free internet radio streams from all corners of the globe via the built-in TuneIn online music service. Simply select TuneIn from the receiver's on-screen menu using the included remote and browse among the 100,000 stations neatly organized into popular categories and select a station that appeals to you.

Spotify Connect: If you subscribe to Spotify Premium and have the Spotify App on your Apple iOS or Android mobile device, you can stream Spotify to the Denon AV receiver. Spotify is a digital music service that gives you on-demand access to one of the largest music libraries in the world (over 15 million tracks and counting). Spotify makes it easier than ever to discover, manage, and share music with your friends. You can browse music by artist, album, track, or most popular; and create your own music library with customized playlists.

HEOS Music Apps: With built-in HEOS technology and the HEOS app on your Apple iOS 7.0+ or Android OS 4.0 devices, you'll be able to stream a wide variety of online music services, plus the music library of your mobile device through the Denon AV receiver.

• Online Music Services: Using the HEOS app, you'll be able to stream your favorite online music service like Pandora, iHeart Radio, SiriusXM, TIDAL,Napster, TuneIn, and Amazon Music. The HEOS app on your Apple iOS or Android device will serve as the controller for these apps and provide song/artist information with Album Art. You can create a "Favorite" station list, so you can quickly access your favorite internet radio stations and online music channels.

• Mobile Device Streaming: Using the HEOS app on your Apple iOS or Android mobile device, you are able to stream your device's music library to the Denon AV receiver. You'll be able to browse your music library by Artist, Album, Genre, and Song; control music playback functions like Play/Pause and Previous/Next Track; and view song/artist info with Album Art from the app on your compatible mobile device. You can even type in an artist name or song title to find music in your mobile device's library.

Notes:

• Prior to using the HEOS system, you'll need to setup up your free HEOS account. Your HEOS account remembers all your settings and preferences such as all your music service logins and HEOS playlists. When you'd like to add multiple smartphone or tablet controllers to your system, you only need to sign in to each new device with your HEOS user name and password. Instantly all your music services and HEOS playlists are available in the new controller too.

• If you prefer, HEOS supports multiple accounts in a single household. This way, each family member can enjoy their own personalized Pandora, Spotify, or other online music account settings and still share all the same speakers in the home.

DLNA 1.5 Certified: The AVR-X8500H is DLNA (Digital Living Network Alliance) 1.5 and Windows 7/8 compliant for audio and photo networking. This means it's easier for you to access and enjoy digital music and still-images (JPEG) stored on your Windows PC. You can use your PC to play high-bit rate music content through the A/V receiver and view still-images on your connected TV, or use the AVR-X8500H's remote control to browse music & photo files on your hard drive. The receiver also supports ID3-Tag (ver.2) and META tag information; so song title, artist name, and album name can be displayed the unit's front-panel display or on-screen menu. In addition the unit will display Album Art on a connected television. The Denon AVR-X8500H supports the following audio formats, sampling frequencies, and bit rates via its wired network connection.

Resolution

Compatible Audio Formats

Sampling Frequencies

Bit rate

Extension

Hi-Res

WAV (PCM)

32/44.1/48/96/176.4/192 kHz

16/24-bit

.wav

FLAC (Free Lossless Audio Codec)

32/44.1/48/96/176.4/192 kHz

16/24-bit

.flac

ALAC (Apple Lossless Audio Codec)

32/44.1/48/96/192 kHz

16/24-bit

.m4A

DSD

2.8/5.6 MHz

1-bit

.dsf/.dff

Compressed

MP3 (MPEG-1 Audio Layer-3)

32/44.1/48 kHz

32-320 kbps

.mp3

WMA (Windows Media Audio)

32/44.1/48 kHz

48-192 kbps

.wma

AAC (MPEG-4)

32/44.1/48 kHz

16-320 kbps

.aac/.m4a

Note: Your computer must meet the following system requirements - Windows Media Player Network Sharing Service or Windows Media DRM10. Album Art is only displayed when using Windows Media Player (ver.11/12).

AM/FM Tuner: The Denon AV receiver features a built-in AM/FM tuner with 56 station auto-preset memory tuning. You can also set your presets manually. You can create an 8-character name for each preset station. You can even directly enter a station number using the receiver's on-screen menu and remote control.

Software Updates: Using the receiver's network/internet connection, you can check for and update the latest firmware from the online Denon server. Visit Denon's Support Site for more details.

Multiroom Playback

HDMI Zone 2: The AVR-X8500H also incorporates multi-zone HDMI audio/video distribution for Zone 2 with the inclusion of its HDMI matrix switching functionality. The receiver can send two different HDMI video feeds to two displays at the same time directly from the receiver. HDMI Zone 2 also supports 2ch PCM audio from the HDMI input source selected. The HDMI Zone 2 function is only compatible with the HDMI 1-7 input connectors. It is not compatible with the HDMI 8 input connector or any other input source. Volume of HDMI Zone 2 is controlled from the TV or additional receiver in Zone 2.

Note: If the receiver's Main Zone and HDMI Zone 2 are set to the same HDMI input source, the Main Zone audio will be mixed down to 2-channel audio.

Zone 2 (Audio/Video): Zone 2 allows stereo audio/video playback of another source connected to the receiver in another room of your home via RCA line-level output or speaker-level output, as well as composite or component video. To enjoy a video source in Zone 2, you must connect the same video connection to your second display monitor as connected to your receiver for that particular source (there is no video-conversion for Zone 2). When using the AVR-X8500H to power speakers in a second room of your home, the main zone is restricted to 11.2-channels. When using the receiver's line output terminals for the second room you need an additional amplifier to power your Zone 2 speakers; the main Zone of the receiver remains 13.2-channel. The volume of Zone 2 can be controlled by the Denon receiver using either configuration or from your add-on amplifier when using the preamp output.

• Compatible Sources:

• HDMI audio (2ch PCM only)

• Optical/Coaxial digital inputs (2ch PCM only)

• Analog audio/video

• AM/FM Tuner (cannot select different stations for each zone)

• USB & Bluetooth

• Network sources (AirPlay, TuneIn Internet Radio, Spotify Connect, HEOS Music apps, & DLNA); the same network source is played in Zone 1 and Zone 2

• Incompatible Sources:

• HDMI video

• DSD audio files

Note: Unfortunately, you cannot select USB, Bluetooth and Network sources exclusively for each Zone. For example, if you select a network source for Zone 2 when a USB source is selected for the Main Zone, the input source in the Main Zone also switches to the same network source as Zone 2.

Zone 3 (Audio Only): Zone 3 allows you to play a different stereo audio source connected to the receiver in a third room of your house. Zone 3 features either a pre-outs or speaker outputs so you can use this amp or a separate amp to power speakers in another room. When using the AVR-X8500H to power speakers in a second and third room of your home, Zone 2 and 3 are limited to mono playback, while the Main Zone is limited to 11.2 channels. When using the receiver's pre-outs for the 2nd & 3rd Zone, you need additional amplifiers in those rooms to power those speakers; the Main Zone of the receiver remains 13.2-channel. The volume of Zone 3 can be controlled by the Denon receiver using either configuration or from your add-on amplifier when using the preamp output.

• Compatible Sources:

• Optical/Coaxial digital inputs (2ch PCM only)

• Analog Audio Inputs

• AM/FM Tuner (cannot select different stations for each zone)

• USB & Bluetooth

• Network sources (AirPlay, TuneIn Internet Radio, Spotify, Connect, HEOS Music apps, & DLNA); the same network source is played in Zone 1 and Zone 2

• Incompatible Sources:

• HDMI Audio/Video

• Analog Video

• DSD audio files

Note: Unfortunately, you cannot select USB, Bluetooth and Network sources exclusively for each Zone. For example, if you select a network source for Zone 3 when a USB source is selected for the Main Zone, the input source in the Main Zone also switches to the same network source as Zone 3.

All Zone Stereo Function: The All Zone Stereo function allows you to enjoy the AV receiver's Main Zone audio source in Zone 2 and Zone 3 simultaneously (regardless of input audio signal types - analog, digital, or wireless). During the All Zone Stereo mode, only the "Multi Ch Stereo" and "Stereo" sound modes can be selected. You will have independent volume control in each zone. All Zone Stereo mode is useful when you want to enjoy the same music at the same time in multiple rooms during a get together or party.

HEOS Wireless Multiroom Audio: Built-in HEOS technology enables the AVR-X8500H to become part of the HEOS by Denon wireless multi-room audio eco-system, allowing you to stream and control all of your local and online music effortlessly from anywhere in your home with the HEOS App on your compatible Apple iOS or Android mobile device over a wireless WiFi network connection. The HEOS system is a true multi-room audio system that automatically synchronizes audio playback between multiple HEOS devices so that your music (up to 24-bit/192kHz Hi-Res audio) coming from different rooms is perfectly in sync and always sounds amazing. You can play the same audio source in every room or any combination of rooms you choose, including a different song in every room.

• Systems: The HEOS wireless multi-room sound system by Denon can support up to 32 HEOS speakers, receivers, amplifiers, and/or pre-amplifiers (all sold separately) on a single wireless network (IEEE 802.11 g/n; 2.4/5GHz).

• Sources: The following sources can be distributed through the HEOS multi-room audio system - Receiver's analog, HDMI (2ch PCM), & optical/coax digital (2ch PCM) inputs; built-in AM/FM tuner and TuneIn Internet Radio, HEOS music apps & Spotify Connect; Windows PC & DLNA music servers; Bluetooth & USB audio; plus music libraries stored on your Apple iOS or Android mobile device. HEOS wireless multiroom audio does not support AirPlay.

• Groups: You can join or group up to eight individual speakers or amplifiers into a group of speakers that function as if they were a single speaker. The HEOS App is also flexible enough where you can create up to 16 Groups (2 speakers/amplifiers per Group).

• Party Mode: You can easily group 16 rooms together into Party Mode by using a "pinch" gesture.

Note: The Denon AV receiver only supports a single HEOS music stream. If you desire a second HEOS music stream through the receiver's multizone output, you will need to connect the HEOS Link to one of the AV receiver's analog inputs.

HDMI Monitor 2: The receiver's second HDMI monitor output lets you send the same HDMI audio/video input signal that is being played in the main zone to a second zone (video is output at the resolution supported by both TVs).

USB/AirPlay/Bluetooth Integration

Front-Panel USB Port: This AV receiver is equipped with a front-panel USB (type-A) port that allows you to enjoy a variety of music files from a USB mass storage class memory device; such as a USB thumbdrive or portable digital audio player. Compatible USB storage devices must be formatted in FAT 16 or FAT32. The unit can recognize up to 500 folders/5,000 files. You can use the receiver's on-screen menu (via HDMI) and remote control to navigate your stored music files on your connected USB memory device. Song/artist information will display on your HDMI-connected TV and the receivers front-panel display. USB portable audio devices that can be charged via USB will be charged when plugged into the AV receiver's USB port (5V/1A); even in standby mode.

Resolution

Compatible Audio Formats

Sampling Frequencies

Bit rate

Extension

Hi-Res

WAV (PCM)

32/44.1/48/96/176.4/192 kHz

16/24-bit

.wav

FLAC (Free Lossless Audio Codec)

32/44.1/48/96/176.4/192 kHz

16/24-bit

.flac

ALAC (Apple Lossless Audio Codec)

32/44.1/48/96/192 kHz

16/24-bit

.m4A

DSD

2.8/5.6 MHz

1-bit

.dsf/.dff

Compressed

MP3 (MPEG-1 Audio Layer-3)

32/44.1/48 kHz

32-320 kbps

.mp3

WMA (Windows Media Audio)

32/44.1/48 kHz

48-192 kbps

.wma

AAC (MPEG-4)

32/44.1/48 kHz

16-320 kbps

.aac/.m4a

Note: The receiver's USB port is not compatible with Apple iPod/iPhone/iPad or Android smartphones & tablets.

AirPlay 2 (via available firmware update): Through an available firmware update, the Denon AV receiver will support AirPlay 2. AirPlay 2 is an advanced and easy-to-use wireless multiroom audio platform for iTunes, Apple Music, and other compatible Apple iOS apps. With AirPlay 2 you can play any sound from your Apple iOS device (running iOS 11.4 or later) or Mac computer (running OS X 10.13.2) on the Denon receiver and other compatible AirPlay 2 speakers throughout your home. You will also be able to ask Siri-enabled devices (like your Apple iPhone, iPad, or Watch) to control playback of your Apple Music on the Denon receiver. With AirPlay 2, also get to see song/artist information and album art via the receiver's on-screen menu (via HDMI). You can choose to play audio in one room, play the same audio in grouped rooms, or play the same audio in every room (you can control and group directly from Apple's Music App and Home app on your Apple iOS device). You can even watch videos and movies from YouTube and Netflix on your compatible Apple iOS device or Mac computer with perfectly synced audio on the Denon receiver.

Built-in Bluetooth: The Denon AVR-X8500H features built-in Bluetooth (version 3.0+EDR) with a 98.4' wireless range for music streaming (A2DP 1.2) and control (AVRCP 1.5). You'll be able to wirelessly connect to smartphones (including iPhone & Android), tablets (including iPad & Android), laptops (including Microsoft Surface & Macbook), computers (including Windows PC & Mac), and other Bluetooth-enabled devices. Up to eight Bluetooth devices can be remembered by the AVR-X8500H, so family members as well as friends can enjoy their favorite tracks (only one device can be used at a time).

• Wireless Music Streaming: You'll be able to wirelessly stream stored music, music apps, and other audio content from your Bluetooth-enabled source device to the Denon receiver. The receiver supports the Bluetooth SBC codec only.

• Wireless Music Control: You will also be able to control basic playback functions (Play/Pause, FF/RW, Skip) using the receiver's remote control. Advanced music operation will still need to be handled from your Bluetooth-enable device. There is no song/artist information display on the receiver or connected TV. Continue to use your Bluetooth device's screen to view song/artist info.

• Auto On & Select: The receiver can be setup to automatically re-connect with previously paired devices, as well as turn on automatically when you start streaming audio from a Bluetooth source device.

Notes:

• Bluetooth hands-free communication for making and answering phone calls is not supported.

• Due to the differences in Bluetooth technology, some Bluetooth enabled devices may be incompatible, function improperly, or may not support all features when used with the Denon AV receiver.

Remote & App Control

AVR Remote App: The new Denon AVR Remote App lets you control the Denon AV receiver using your Apple (iOS 7.0) or Android (OS 4.0+) device. From this free app on your compatible Apple iOS or Android device, you'll be able to control the Denon AV receiver's basic functions; such as power, volume, input, surround modes, and other settings. You'll also be able to control separate Zones of the receiver, as well as navigate the AV receiver's network and Internet content from the app. In addition, you get you get unique features likes a landscape orientation control screen for tablet devices, the ability to create playlists, and control over a Denon Blu-ray player.

• Landscape Orientation Control Screen: With a landscape orientation control screen for tablet devices, you can easily browse and navigate through your network music services or personal digital music collection with ease, and at the same time view now-playing information and cover art all on a single screen.

• Create Playlists: The app's playback screen allows you to easily build your own personal music playlists on the fly with the ability to Drag & Drop files into your queue, or tap to "Play Now", "Play Next", "Play Next and Replace Queue" or "Add to End of Queue". You can then save your queue as a playlist for easy recall.

• Denon Blu-ray Player Control: The app allows control over Denon Blu-ray (DBT-xx13 series) that are connected to the AV receiver via HDMI.

Note: This AV receiver is not compatible with last year's older Denon Remote App.

HEOS App: You'll need to download the HEOS App onto your Apple iOS 7.0+ or Android OS 4.0 device to enjoy HEOS functionality on the AVR-X8500H receiver. Using your mobile device and the HEOS app, you can setup, browse, explore, and control HEOS system right in the palm of your hand, from anywhere in your home. Your compatible Apple iOS or Android device must be connected to the same home wireless (WiFi) network as the AV receiver and your entire HEOS system. The HEOS app consists of 4 control screens.

• Settings: The "Settings" screen enables you to connect one or more HEOS speakers, receivers, amplifiers, and/or pre-amplifiers to your home's wireless network.

• Rooms: From the app on your Apple iOS or Android device, you can select which rooms you want playing. You can play the same music in multiple rooms by grouping rooms together, or you can listen to a different source in each room.

• Music/Sources: You can select what music and which source you want to listen to from the app. Choose from online music services like Pandora, Spotify, TuneIn, Tidal, etc.; your music library on your Apple iOS or Android device, Windows PC/DLNA server, or USB thumbdrive; and analog, digital, and HDMI inputs; as well as Bluetooth on the HEOS AVR. You can also select music from Playlists you've created, Favorites you've saved, and your recent listening History.

• Now Playing: The "Now Playing" screen displays song, artist, and album information; along with Album Art. You also get basic playback controls like Play/Pause and Previous/Next Track, plus Volume controls Up/Down and Mute. In addition the "Now Playing" screen functions unique to the selected online music service or music library.

Alexa Compatible (via firmware update): Through a network firmware update, HEOS and Amazon Alexa customers can now enjoy the convenience of Alexa voice control plus high-quality wireless home audio. In addition to controlling your HEOS components with the HEOS app on your mobile device or tablet, you can now control them with Amazon Alexa voice technology and an Amazon Alexa device (including the Amazon Echo, Echo Dot, Tap and Echo Show - all sold separately). Voice control features include -

• Alexa voice commands include Volume (up/down, specific volume number, & mute); Playback (Play, Pause, Stop, Next, Previous, Resume); and Power on/off. The HEOS Bar and HEOS AVR even support HDMI switching (1-4) through Alexa voice command.

• You can group your HEOS-enabled devices using the HEOS app with an Alexa-friendly name. Once they are grouped, Alexa voice commands will control the group as a whole. If you want to play audio content from only one HEOS-enabled device in the group, you must ungroup the device within the HEOS app.

• You are able use voice commands to search for songs, albums and artists and even podcasts and internet stations from HEOS & Alexa compatible music apps - like Amazon Music, Pandora, TuneIn, iHeartRadio, Spotify Connect, & SiriusXM.

• For a list of current Alexa voice commands supported by the HEOS HomeEntertainment Skill, click here. For setup instructions, click here.

Note: You will need an Alexa-enabled device (Amazon Echo, Echo Dot, Tap, or Echo Show - all sold separately) to operate your HEOS products via voice-command. Youre HEOS components and the Alexa-enabled devices must be on the same network.

Google Assistant Support (via firmware update): Ask your Google Home, the Google app (for Apple iOS 10.0+ and Android OS 4.4+), or other devices with Google Assistant built-in to control HEOS content across your listening environment. Once you start music in the HEOS app, you can ask the Google Assistant to control volume, play, pause, skip tracks, and more. Once you have grouped your HEOS-enabled devices using the HEOS app, you can use the Google Assistant and voice commands to control a group of HEOS devices as a whole. Make sure the unit has the latest HEOS software and firmware update installed.

Notes:

• A firmware update (scheduled for 2019) will allow you to use the Google Assistant and your voice to queue up music services, power on/off devices, switch inputs and more.

• Click here for more info on Google Assistant for HEOS.

MultEQ Editor App: Download the MultEQ Editor App onto your Apple iOS 8.0+ or Android OS 4.0+ devices for further sound customization and detailed tuning to more precisely tailor the sound to your room and personal preferences. This app lets you view the speaker detection results to check correct installation, view before and after results of the Audyssey calibration making it easy to identify room problems, edit the Audyssey target curve for each channel pair to suit your tastes, adjust the EQ frequency adjustment range for each channel pair, switch between 2 high frequency roll-off target curves, enable/disable midrange compensation to make the vocal region brighter or smoother, as well as save and load calibration results.

IR Remote Control: The provided IR wireless remote can be programmed to operate other manufacturer components, as well as learn commands from other manufacturer remote controls. It also supports HDMI-CEC and Smart TV control. The remote features a backlit LCD window which displays information about the sources and modes selected.

• Multibrand/Learning Programming: This remote control is preset with remote codes for Denon AV components. The remote also contains codes for other manufactures which can be programmed. In addition, the remote control is capable of learning and storing codes used by other remotes. You can use the remote control to program a series of button operations in sequence. This remote can remember up to 4 macro functions; each macro can record a maximum of 18 steps.

• HDMI-CEC & Smart TV Control: When you make an HDMI connection with a TV or Blu-ray player compatible with the AVR-X8500H's HDMI control function, you can perform the operations from the AVR-X8500H's remote control; Power off, Switching of audio output devices, Switching of audio input devices, Volume adjustment, and Playback functions. When you connect the AVR-X8500H to your Smart TV, you have the option of controlling the AVR-X8500H via the TV's remote control which lets you select an input, adjust the volume and choose the surround sound mode. The receiver and your TV must be connected via HDMI with the HDMI-CEC function activated on both components.

Custom Integration: The AVR-X8500H is part of Denon's IN-Command series line-up of receiver, which is Denon's certification to custom installers that the receiver has advanced connectivity and control features often required for custom home integration and theater applications using premium control systems. These features include IP control, a RS232C jack for use with whole house control systems, remote in/out IR command control, and 12V trigger outputs.

• RS-232C Port: Port for connection to external whole-house control systems, from companies such as AMX, Crestron, etc.

• Remote Jacks: Minijack input and output jacks for use with an optional IR repeater system (sold separately).

• 12V Trigger Outputs: The AVR-X8500H has two minijack outputs to send a 12-Volt DC turn-on signal to another component that accepts a 12V trigger, such as a power amplifiers in Zone 2 and Zone 3. The conditions under which the trigger output activates is programmable.

• IP Control: The receiver can be set up and operated by a home computer on the network via IP control, either via wired LAN connection or Wi-Fi, and also features Control4 SDDP (Simple Device Detection Protocol) certification for quick and easy integration with Control4 home automation equipment.

Convenience Features

OSD w/ Setup Assistant (via HDMI): With Denon's on-screen menu and setup assistant, you can connect, configure, and use your home theater system with ease. The OSD and setup assistant features clear on-screen graphics and text that optimizes critical system settings for your particular home theater setup. The on-screen menu and setup assistant can be output to your TV via HDMI only. If you connect the receiver to your television via only composite or component video, you will need to use the AV receiver's front-panel display for menu and source adjustments.

Notes:

• Initial setup requires that the receiver be connected to your TV via HDMI for display of the on-screen menu. Many of the receiver's setup functions can only be found via the on-screen menu and not the front-panel display.

• The video being played will not appear in the background of the menu when the menu is operated during playback of 4K or 3D video, or if the video aspect ratio is not 16:9 or 4:3.

Quick Select: On the AVR-X8500H's front-panel and remote control, you'll find four Quick Select buttons that let you quickly choose from the most popular input sources. With Quick Select, the AVR-X8500H remembers not only your preferred inputs but also your preferred audio settings, so you can enjoy precisely tailored sound with each one.

Input Name & Delete: You can change the display name (up to 8 characters) of a selected input source. If an input isn't being used, you can delete it from the display so you don't have to scroll past it when you change sources.

Sleep Timer + Auto Standby: The Denon AV receiver features a programmable Sleep Timer and Auto Standby function. The Sleep Timer allows you to automatically set the power to standby after a predetermined amount of time has passed; set the sleep timer up to 120 minutes in 10 minute increments. The unit enters Standby mode automatically when no commands are sent to the unit for the set time (15/30/60 minutes). Before it enters the standby mode, "Auto Standby" is displayed on the front-panel display of this unit and the on-screen menu.

ECO Mode: This receiver is equipped with an ECO Mode function that allows you to enjoy music and movies while reducing the power consumption during use, Eco mode adjusts the maximum power available according to the volume level selected to reduce power consumption.

Personal Memory Plus: For each input, the receiver automatically memorizes the settings for input mode, surround mode, HDMI output mode, audio delay, etc. When the input source is switched, the settings last used for that source are automatically recalled. The surround parameters, tone control settings, and playback levels for the different output channels are memorized for each surround mode.

Protection Circuit: This is a function to prevent damage to components within the power supply when an abnormality such as an overload, excess voltage, or over-heating occurs. In this unit, the power indicator blinks and the unit enters standby mode when an abnormality occurs.

Personal Memory Plus: For each input, the receiver automatically memorizes the settings for input mode, surround mode, HDMI output mode, audio delay, etc. When the input source is switched, the settings last used for that source are automatically recalled. The surround parameters, tone control settings, and playback levels for the different output channels are memorized for each surround mode.

Protection Circuit: This is a function to prevent damage to components within the power supply when an abnormality such as an overload, excess voltage, or over-heating occurs. In this unit, the power indicator blinks and the unit enters standby mode when an abnormality occurs.