Krell Evolution 202 Preamplifier in Silver Finish

The Evolution 202 preamplifier employs a powerful, separate power supply, Krell Current Mode gain stages from input to output, and Current Audio Signal Transmission (CAST) receivers and transmitters. Utilizing these powerful technologies, the Evolution 202 conveys the complete range of timbre and dynamics that comprise the foundation musical performance.

About this product
Fantastic condition trade-in Krell Evolution 202 Preamplifier in Silver Finish. Preamp comes with printed owner's manual, remote control, power cord, and 12V Trigger Cable. Preamp does not come in original box, but will be professionally packed for shipping.

Preamp is rated 8/10 for minor cosmetic wear consistent with age and use.

SPECIFICATIONS
Inputs: 2 pr. CAST via 4-pin bayonet connectors 2 pr. balanced via XLR connectors; 3 pr. single-ended via RCA connectors
Tape input: 1 pr. single-ended via RCA connector Main outputs: 2 pr. CAST via 4-pin bayonet connectors 1 pr. balanced via XLR connector; 1 pr. single-ended via RCA connector
Tape outputs: 1 pr. single-ended via RCA connector, buffered Control inputs: 1 RS-232 input via a 9-pin D-subminiature connector; 1 remote IR detector input via a 3-conductor 3.5 mm connector; 1 12 VDC trigger input via 3.5 mm connector; 1 preamplifier link via an RJ-45 connector
Control outputs: 2 individually programmable 12 VDC trigger outputs via 3.5 mm connectors; 1 preamplifier link via an RJ-45 connector
Power output: 1 phono power output (±20 VDC) for KPE via a 9-pin D-subminiature connector
Input impedance: CAST: 45 Ohms; Balanced: 95 k Ohms; Single-ended: 47.5 k Ohms
Output impedance: CAST: >1 M Ohms Balanced: 50 Ohms Single-ended: 25 Ohms
Gain: 12 dB (CAST or balanced output) 6 dB (single-ended output)
Volume control: Balanced, current-mode, 16-bit, discrete R-2R ladder
Input overload: CAST: 14 mA RMS Balanced: 14 V RMS Single-ended: 7 V RMS
Output overload: CAST: 16 mA RMS Balanced: 16 V RMS Single-ended: 8 V RMS
Frequency response: 20 Hz to 20 kHz ± 0.02 dB 0.1 Hz to 1.5 MHz +0, -3 dB
Total harmonic distortion plus noise: Balanced Output: <0.004%, 20 Hz to 20 kHz, 4 V RMS or 4 mA RMS
Signal-to-noise ratio: 4 V RMS balanced or 4 mA RMS CAST output Wideband, unweighted: >100 dB; “A” weighted: >109 dB
Power consumption: Standby: 45 W; Power on: 70 W; Power on, with KPE: 80 W
Dimensions: Preamplifier only: 17.3in.Wx3.8in.Hx18.3in.D 43.8cmWx9.7cmHx46.4cm D; Power supply only: 17.3 in. W x 3.8 in. H x 17.7 in. D 43.8cmWx9.7cmHx44.8cm D; Preamplifier and power supply: 17.3 in. W x 7.6 in. H x 18.3 in. D 43.8 cm W x 19.2 cm H x 46.4 cm D
Weight: Shipped: 61 lbs., 27.6 kg Preamplifier only: 18 lbs., 8.1 kg Power supply only: 28 lbs., 12.7 kg

Additional Information
Please call 734.662.3595 and ask for Richard if you have any questions about this product. We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.

For a complete listing of all of our specials, please visit: https://www.paragonsns.com/product-category/preowned-specials/