Bel Canto Reference REF500S Stereo Amplifier

**Please click here to check out our newly launched SkyFi Audio website with additional items for sale**

CNET, Steve Guttenberg, Aug 2010:

"For such a little thing (8.5 by 3.5 by 12 inches), the REF500S is seriously powerful, it can deliver 250 watts into 8 ohm speakers; 500 watts into 4-ohm-rated speakers. … Top-quality parts including Caddock resistors, special ultra-low ESR decoupling capacitors, and low-noise regulated power supplies. That's all on the inside; I think the amp looks really cool. … The REF500S sounds stellar on my Magnepan MG 3.6/R speakers, which are one of the toughest speakers to drive well."

More From Bel Canto:
The REF500S stereo amplifier has incredible power per square inch with two independent mono boards in a single chassis. Independent power supplies and isolated input signal filter technology reduces high power amplifier energy for a cleaner, transparent power.

The Bel Canto Impedance Optimized Input Stage is a balanced high Common Mode Rejection, low output impedance driver that is critical to the amplifier's performance, ensuring that the refined dynamic qualities of the recording are preserved.

WBT NextGen Speaker Connectors
The WBT NextGen connectors provide the best possible connection from the amplifier to the speaker cables. We choose them because they impart minimal sonic signature to the sound, remaining open and grain-free up throughout the audio frequency band.

Click here for a PDF copy of the Bel Canto REF500s User Guide

Click here to see our other Bel Canto items listed for sale

REF500S Stereo Amplifier Specifications:

Maximum Power Output: 500W 4 ohms, 250W 8 ohms per channel
Power Output 1% THD: 400W 4 ohms, 200W 8 ohms per channel
Minimum Load: 2 ohms per channel
Peak Output Current: 35 amperes per channel
Frequency Response: +/-3 dB 1.5Hz-70KHz, all loads
THD+N: 0.003% 1W, 1KHz, 4 ohms
IMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohms
Output noise: 35uVRMS A-weighted 10Hz-20KHz
Voltage gain: 27dB (single ended or balanced input)
Damping factor: >1000
Output Impedance at 100Hz: <8 milliohms
Dynamic Range: 121dB
Input Voltage for Max Output: 2Vrms
Input connections: Single-ended RCA or balanced XLR
RCA input impedance: 100Kohms
Balanced input impedance: 200Kohms
Output connections: 2-sets WBT Nextgen 5-way binding posts
Power On usage: 19W
Power Off usage: 0.0W
Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz
Size: 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm] (WxHxD)
Weight: 15 lbs, 7 Kg

Thanks for looking and please click here if you would like to receive a list of the equipment we receive from time to time.  We promise not to bombard you with junk email.

----------

PURCHASING FROM SKYFI

This item will be professionally packaged and insured for safe transit to your home. 

Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.

If we don’t have the original manufacture's packaging, we use heavy duty double ply corrugated boxes with Instapak expanding foam custom inserts.  In many cases this has proven to be better than the original packaging.  We also use high quality fiber reinforced tape to seal our packages.  Lightweight items will be bubble wrapped and shipped in a high-quality box. 

This item is available for pickup in Glen Rock with convenient parking near our building.

NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.

Use the Buy It Now button and we will cover the PayPal fees.

Thanks for looking and be sure to call us at 201-879-0000 with any questions. 

Please also click here to visit our Audiogon store to see the rest of the items we have for sale.

----------

WHO WE ARE 

SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high-end audio equipment.  We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, no junk. 

Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold.  We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.

Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Pro-Ject Audio Systems, and Sony ES, we have access to OEM parts, service, and support.  If you are local and looking for new equipment from the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area.

PURCHASING GUIDELINES

We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers. 

If you do not see a “Make an Offer” button, it means we are not considering any offers on that item.   

PAYMENTS

We prefer working through PayPal which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees if you purchase the item at the asking price.  You can also send us a personal check (which will need to clear before shipping), certified check, money order, or wire transfer. International clients without access to PayPal should use a bank wire transfer. 

If you are picking up an item we do not accept PayPal.  You must pay in person with cash, certified or bank check, or wire transfer.  If you make a PayPal payment and are picking up the item, it will be returned. 

TRADE IN POLICY 

We accept trade-ins of equal or lesser value under certain conditions.  Simply ask and let us know the exact model, condition, and the accessories that are included (such as the original box, remote, cables, manual, etc.).  We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type.  We will offer a fair value for your equipment, but keep in mind we are running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment.  If you are looking for top dollar we suggest attempting to sell it directly to an end user on your own.

SELL US YOUR GEAR (Working or Broken)

We will also purchase your used or broken gear and arrange pickup if you are in our local market. Just drop us a note for a quote but be sure to include the condition and what is included. 

HOW TO VISIT US                                                                                                        

We are currently operating from our shop located in Glen Rock, NJ.  You are welcome to make an appointment if there is a piece of equipment you would like to see in operation before or after purchase.  We have a well-equipped, dedicated listening room with tons of equipment of all makes and models.  We are not a store, so please don’t make an appointment if you are just curious as to how a speaker or piece of equipment sounds.  In essence, no tire kickers please.

You can call 201-879-0000 with any questions or to schedule an appointment.  We can also arrange to install, calibrate, and tune the gear in your listening room if you’re local to our area.  This is super useful when purchasing large speakers or heavy amplifiers.  It’s also great for ensuring your new turntable is setup correctly in its final resting place.  

V2.1