Mark Levinson No. 585 - STORE DEMO - FULL WARRANTY
Listed · 740 Views
This listing has ended.
Listings Similar to Mark Levinson
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Contact seller after sale to pay viaExpress Checkout, VISA/Mastercard, American Express, Discover or Wire Transfer | |
Ships from | Denver, CO, 80222 |
Ships to | United States |
Package dimensions | unspecified |
Shipping carriers | UPS or FedEx |
Shipping cost | Free |
Original accessories | Remote Control, Box, Manual |
Average | Research Pricing |
Store Demo unit in excellent condition! This product comes with a full manufacturer's warranty (valid only in the United States). It has been fully tested by our team of audio/video experts, has the original box and includes all accessories. Our inspections are thorough so we can ensure you receive a product that you will love. Buy with confidence from an Authorized Mark Levinson Dealer!
Product Details
The foundation of the No585 is its fully discrete, mirror-imaged, dual-monaural analog circuitry featuring individual signal switching relays for each of its four stereo inputs: one XLR and three RCA. Volume controls use discrete 15-bit R-2R ladders and low-noise analog switches for the widest possible bandwidth and maximum signal integrity.
The fully-differential Class AB power stage includes an oversized 900VA toroidal transformer with individual secondary windings for the left and right channels. Each elegantly simple amplifier channel utilizes twelve output transistors and multiple smaller local capacitors that allow them to be placed physically closer to the amplifiers for greater transient response when power is needed immediately.
This robust architecture results in a conservative power rating of 200W per channel with stability into 2 ohms. System integration and expansion are possible using the stereo RCA preouts which can operate full-range or with an included switchable, second-order, 80Hz crossover filter allowing for seamless integration into 2.1-channel systems with powered subwoofers.
Nº585 Highlights
- Versatility and flexibility
- Iconic Mark Levinson industrial design complements any decor
- Unsurpassed power and performance
- Restores information lost during compression resulting in fuller more dynamic sound
- Heightened realism
- Variety and convenience
- Ease of use
- Reliability
- Protects your investment
General Specifications
- Amplifier Section Output Power 200W RMS per channel @ 8 Ω, 20Hz – 20kHz
- Amplifier Section Damping Factor >400 @ 20Hz, referred to 8 Ω
- Amplifier Section Frequency Response 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB
- Amplifier Section Signal-to-Noise Ratio >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting
- Amplifier Section Voltage Gain 40.7dB (maximum volume setting)
- Amplifier Section Total Harmonic Distortion <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω
- Preamplifier (Analog) Input Impedance >45k Ω (RCA & XLR)
- Preamplifier (Analog) Input Overload >5.5V RMS (RCA & XLR)
- Preamplifier (Digital) Sample Rates/Bit Depth PCM
- Analog Audio Connectors 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
- Digital Audio Connectors 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)
- Control Connectors 1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector)
- Mains Voltage 100V AC, 115V AC, or 230V AC (factory-set)
- Power Consumption Maximum 1000W (power on)
- Unit Dimensions (H x W x D) 6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm)
- Packaging Dimensions (H x W x D) 19" (483mm) x 26" (660mm) x 26" (660mm)
- Weight 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging
Audio Specifications
- Amplifier Section Output Power 200W RMS per channel @
- 8 Ω, 20Hz – 20kHz
- Amplifier Section Damping Factor >400 @ 20Hz, referred to 8 Ω
- Amplifier Section Frequency Response 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB
- Amplifier Section Signal-to-Noise Ratio >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting
- Amplifier Section Voltage Gain 40.7dB (maximum volume setting)
- Amplifier Section Total Harmonic Distortion <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω
- Preamplifier (Analog) Input Impedance >45k Ω (RCA & XLR)
- Preamplifier (Analog) Input Overload >5.5V RMS (RCA & XLR)
- Preamplifier (Digital) Sample Rates/Bit Depth PCM
- Analog Audio Connectors 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
- Digital Audio Connectors 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)
- Control Connectors 1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector)
- Mains Voltage 100V AC, 115V AC, or 230V AC (factory-set)
- Power Consumption Maximum 1000W (power on)
- Unit Dimensions (H x W x D) 6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm)
- Packaging Dimensions (H x W x D) 19" (483mm) x 26" (660mm) x 26" (660mm)
- Weight 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 30 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.
Special Conditions
All returns and support are only available within the continental US.