JBL Synthesis SK2-3300, Beryllium drivers, Dual 10 in.woofers, Pair available, NIB

Selling my pair of JBL Synthesis SK2-3300 speakers. Asking price is for the pair of speakers. I'm the original owner and these were purchased brand new. I've never had them out of the boxes and they've been in storage since I bought them. Approx. 2 years
old, these were originally purchased with ideas to try them out as front
R/L but my plans have changed, and I have way too much gear so I've
decided to sell. THX® Ultra2-certified.
I've previously owned an SK2-3300 as a center channel for a couple years and it worked extremely well with a variety of speakers, including full range dipole ribbons,
typical cone/dome designs and of course designs with compression
tweeters like the M2 and Everests. The beryllium compression drivers
must be heard.
The photos include a stock photo of the speaker and is not of the actual speakers which are shown in their unopened boxes.

From JBL site:
The SK2-3300 is a compact 3-way high-performance LCR loudspeaker built upon
the same technology used in the acclaimed Project K2S9900, one of the
most advanced and sophisticated loudspeakers in the world today. A
3-inch beryllium diaphragm compression driver mated to a 100° x 60°
Bi-Radial® horn delivers high-frequencies with lifelike dynamics and
startling realism while an ultra-high frequency 1-inch beryllium
diaphragm compression driver with a 60° x 30° Bi-Radial horn recreates
critical air and spaciousness. Two 10-inch Aqua-Plas™-coated woofers
each with dual 3-inch edge-wound voice coils, Neodymium motor structures
and cast aluminum frames add serious punch and depth to the already
potent combination of HF and UHF horns to reproduce music and movie
soundtracks with the lowest distortion and flattest frequency response
possible. The SK2-3300 can be used either as an LCR loudspeaker or as
the companion center channel to the Project K2 S9900 or Project Everest
DD66000.

Specifications:

Maximum Recommended Amplifier Power 400 Watts (RMS)
Impedance 8 Ohms
Sensitivity (2.83V @ 1m) 93dB
Frequency Response 50Hz – 50kHz
Ultrahigh-Frequency Driver 1″ (25mm) Pure-beryllium compression driver (045Be) with 0.35″-throat Bi-Radial® horn
High-Frequency Driver 3-Inch (75mm) 435Be Pure-beryllium compression driver with 1.5″-throat Bi-Radial® horn
Low-Frequency Driver Dual 10-inch (255mm) 2251J-2 Aquaplas™-coated, pulp-cone woofers with 4″ edge-wound voice coils and
EPDM rubber surrounds, and utilizing Alnico magnets
Dimensions (H x W x D) 23″x 25″ x 12”; 587mm x 635mm x 292mm
Weight 89 lb (40.3kg) Each

Paypal add 3%, shipping is negotiable but will likely have to be with freight given the weight and value.