Aric~Audio "Super KT Push-Pull" monoblock amplifiers

Note, I've dropped the price as low as I will go and will remove the listing if it does not sell for this and simply keep the amplifiers.
Up for your consideration is a pair of my "Super KT Push-Pull" monoblock amplifiers, which were the actual review units sent to Mike Wright of "Stereo Times", and were used for the review. I am the builder and designer of these amplifiers, and will include a full 2 year parts and labor warranty to the purchaser. These are "new", however were used for the sole purpose of being reviewed. Please DO READ the attached review by Stereo Times, as it is a worthy read and does a great job highlighting the great performance of these amps!
 
NOTE: I will include TWO full sets of power tubes- which can be chosen upon the buyer's request. Options are: Valve Art EL34, Gold Lion KT88, Tung Sol KT120, and Tung Sol KT150.

The review link has been attached at the bottom of this posting, as is a direct link to the website page for this product. Here are some specs and details below:

The frame-work of these amplifiers include two fully independent power supplies for the input stage and driver as well as the power section respectively. Either the 6SL7 or 6SN7 for the input section gives great flexibility for gain, and a 6V6GT cathodyne phase-splitter provides high current/high voltage balanced outputs to the power tube grids. The amplifier can use EL34s, KT88s, KT120s and KT150s in Triode or Ultra-Linear mode with variable feedback. Bias switches below the amplifier set the power output and eliminate maintenance as well as having to re-bias the amplifier when the output tubes are switched. In essence, this is the "Universal Push-Pull Amplifier".

- Compatible with EL34, KT88, KT120 and KT150 power tubes

- Compatible with 6SN7 or 6SL7 input tubes

- 6V6GT Cathodyne phase-splitter

- Variable negative feedback/damping

- Triode/UL mode switch

- Bias switches below the amplifier

- Individual input + driver stage and output stage power transformers

- 100% point to point wired and made in the U.S.A.

- Auto-Bias circuit requires no adjustments. Simple switches change from low to high bias

- Input level adjustment on rear of amplifier

- Compatible with 4 or 8 ohm speakers

- Power Output vs. Tubes/Mode:

- EL34- triode-mode= 20 watts/U.L. mode=35 watts

- KT88- triode-mode= 25 watts/U.L. mode=45 watts

- KT120- triode-mode= 45 watts/U.L. mode=60 watts

- KT150- triode-mode= 60 watts/U.L. mode=80 watts

- Additional specifications:

- Tube sockets: gold-plated

- RCA jack and speaker binding posts: gold-plated

- Feedback/Damping- up to 15 db

- Frequency response at full power (limited by output transformer bandwidth):

- 20~20K Hz., <1dBu

- Chassis: Walnut outer frame/Poplar inner frame aluminum top and bottom plates

- Weight: 37.5 lbs each

- Dimensions: 17.5" x 12.5" x 9.5" each

- Priced per pair

This product received the Stereo Times "Most wanted component 2010-2020" award.

NOTE: These amplifiers are guaranteed to be in excellent condition and I will provide a full 2 year parts and labor warranty on the amplifiers. 

Review link (You may need to copy and paste the link into your browser):

http://v2.stereotimes.com/post/aric-audio-super-kt-pushpull-monoblock-amplifiers/?fbclid=IwAR3yaJWZUDn13Lno0x5O0stzQSlRVIyLyaB1-bv2BMsBN8ehSytQd8L7LW0

Website link:

http://aricaudio.com/products.php?product=SuperPP