VPI Industries Nomad

Excellent VPI Nomad turntable in perfect working condition. 

The Nomad is VPI’s the first
all in one high-end entry level turntable.  Complete with a headphone
amplifier, phonostage, and pre-mounted Ortofon 2M Red cartridge on a 10 inch
Gimballed / Yoke bearing tonearm, it is the perfect solution to enjoying your
records!  It also has standard RCA connections providing the ability to
connect to a standard amplifier and desktop/floor standing speakers. The Nomad
turntable is a precision instrument that has been thoroughly tested to create
the musical experience you're looking for!

 

WARNING: The Nomad’s phonostage
is not defeat-able and MUST NOT be plugged into another phonostage.  Doing
so could result in serious damage to your speakers.

​

 

The
Table:

·       
1.25”" thick
textured vinyl covered non-resonant MDF chassis.

·       
16" x 11"
footprint

·       
19” x 14” x6” overall
size

·       
MDF/Composite Platter

·       
Platter rotates on an
oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric
rigidly mounted coupling.

·       
The bearing has a PEEK
thrust disc and machined graphite impregnated brass bushings using a Thompson
Engineering 60 Rockwell case hardened shaft.

​

Tonearm:

·       
New 9” vertical Yoke
type tonearm with lateral turntable type bearing.

·       
Pivot to spindle:
223mm

·       
Effective length:
240.7mm

·       
Overhang: 17.7mm

·       
Offset angle: 22.85
degrees

·       
Average RMS
distortion: .36%

·       
VTA adjustable arm
mount.

·       
Damped stainless steel
armtube.

·       
Very pure copper wire,
twisted with special insulating jacket.

·       
The armbase is
upgradeable to a standard JMW 9 arm.

​

Additional
Specifications:

Type    
                  
      Belt drive (manual turntable)

Motor  
                    
    24v synchronous AC motor

Turntable Platter
        Aluminum

Diameter    
                 11.81” (30.0 cm)

Turntable Speeds
       33.3 RPM and 45 RPM

Wow and Flutter  
       0.06% WOW (in accordance with DIN specification)

                     
                 0.04% Flutter in
accordance with DIN specification)

Rumble    
                    <
- 80dB (IEC 98A unweighted)

Cartridge  
                   Ortofon 2M
Red

Output    
                     5
mV @ 1 KHz

Tracking Force  
          1.5 grams (recommended)

Input Load  
                47K

Weight    
                     5.5
grams

Power Supply  
           110v VAC @ 60 Hz, 230v VAC @ 50hz

Power Consumption
 7.7 watts at full output

Dimensions  
              18.5” (470 mm) W x 13.5”
(343 mm) D x 4.3” (109 mm)H

Weight    
                   
 12.9 lbs. (5.9 kg)