Proceed AVP2 THX Surround Processor

From Mark Levinson

• Works great.

• Removed from clients home after system upgrade.

• Remote control included.

The AVP2 shares the same type of powerful DSP engine used in the Mark
Levinson No.40 Media Console, employing multiple Analog Devices SHARC
DSP chips in a Madrigal-designed operating system. This DSP engine has
sufficient power to handle the decoding requirements of Dolby Digital,
DTS, MPEG2, THX, and many other decoding schemes.

In addition, its power and flexibility provide for future updates to
handle as-yet-undefined digital audio standards that may be adopted in
the future, such as a secure digital interface for DVD-Audio or SACD
(should the recording industry ever manage to agree on such a thing).

The AVP2 includes eight channels of digital to analog conversion, all of which
can
process and convert 192 kHz digital information. In addition, all
volume controls within the AVP2 are implemented in the analog domain,
allowing the DACs to run at their maximum resolution at all times.

Frequency response: 20 Hz – 20 kHz, +0dB, –0.2dB

Total harmonic distortion: 0.005% @ 1 kHz, A-weighted

Maximum output (XLR): 10 V RMS

Maximum output (RCA): 5 V RMS

Dynamic range: 100 dB (or better)

Signal to noise ratio (balanced outputs): 105 dB (ref: 0 dB output)

Channel separation: better than 100 dB

Analog filter: Bessel-tuned, linear phase to 40 kHz

Low-level linearity: deviation less than 1 dB to -90 dB FS

(1 kHz, 20 bit data, 80 kHz measurement bandwidth)

Volume range: 0.0 (off) to 91.0 dB

Volume resolution: 0.5 dB steps above 31.0 in display

1.0 dB steps between11.0–31.0 in display

2 dB steps below 11.0 in display

Digital inputs: 4 S/PDIF electrical on RCA

1 S/PDIF electrical on BNC

1 AES/EBU electrical

1 EIAJ optical

Analog inputs: 1 balanced stereo pair on XLR

7 single-ended pairs on RCA

RF Demodulator input: Digital Input 3 (w/opt. RF demodulator card)

Digital input impedance: 75 Ohms (S/PDIF electrical)

110 Ohms (AES/EBU electrical)

Digital output: 1 RCA (S/PDIF electrical)

Digital output impedance: 75 Ohms (S/PDIF electrical)

Main analog outputs: 3 balanced outputs (main left, center, right)

8 single-ended outputs (5.1 plus 2 auxiliary channels)

Analog output impedance: 10 Ohms

Available trigger current: 80 mA per outlet

Power consumption: less than 50 W

Shipping weight: 34 lbs. (15.5 kg)