Haufe 2xV264 / Neumann BV33 STEREO Moving Coil (MC) step up input transformer in metal case with RCA jacks !
Neumann BV33 step-up MC input transformers were used in Neumann WV2 and WV2a pre-amplifiers in early 60's.
After 1962, used the BV33 transformer with type number 2xV264, produced for Neumann by Haufe manufacture.
The offered transformer comes from a new edition of the 2xV264 produced by Haufe. Limited edition !
The MC transformer type 2xV264 were produced by Haufe manufacture on behalf of Georg Neumann company in Berlin, and were used in the broadcast studio preamp/equalizer Neumann WV2a, and as well in the little brother of the Neumann WV2 the SEV 1, an MC phono preamp/equalizer for general purpose application.
The Haufe 2x V264 (Neumann BV33) consists of two identical and matched MC transformers installed in one heavy gauge mu-metal screening can.
This MC transformer is perfectly suitable for operation with all MC cartridges, with output impedance from 2 to 100 Ohm (for example from low output impedance Ortofon SPU to high output impedance EMT TSD15)
Made in Germany.
Comes in metal case with RCA jacks
RCA sockets - Neutrik gold plated contacts
Ground post - Plastic knob
CONDITION - Transformer is TESTED - Perfect working condition (NEW).
Cosmetic condition is excellent.
Please look closely at the pictures.
!!! If you need more photos - please check my offer on EBAY - 262691836721 (You can see 12 photos) !!!
(The photos are taken from the actual selling item).
Payment Methods :
Paypal (add 5,5% total)
Shipping WORLDWIDE is 30$ !!!
(EMS Express Mail Service with tracking number)
Technical data :
Standard ratio 1 : 50 with open output (no loaded)
Actual ratio 1:40 with load resistor about 100 kOhm - as in the originally circuit of Neumann WV2 pre-amplifier
Actual ratio 1:30 with load resistor about 50 kOhm - as standard in each MM- phono equalizer preamplifier
Actual step-rate is 30 dB in case a operation with MM phono pre-amplifier, with 47-50 kOhm load/input resistance
Input DC resistance : 8 ohm
Suitable for use with all cartridges with output impedance from 3 to 100 ohm
Recommended especially for low impedance cartridges with an output impedance about 3 to 40 Ohm
Output DC resistance: 4,4 kOhm
Output load resistance: 50 - 100 kOhm
Can diameter: 38 mm
Can high: 37 mm
Weight: 115 gr
Thanks for looking !