Complete Set Paradigm Studio Reference Speakers - 6 Pieces - JUST REDUCED!!
Listed · 1314 Views
This listing has ended.
Listings Similar to Paradigm
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Ships from | Baldwin Place, NY, 10505 |
Ships to | United States |
Package dimensions | unspecified |
Shipping carrier | Local pickup only |
Shipping cost | N/A |
Average | Research Pricing |
Fantastic full set (6 pieces) of high-end Paradigm speakers - 2 floor standing speakers, 2 surround sound bookshelf speakers, 1 center speaker, and 1 subwoofer. These are all Paradigm Studio Reference Speakers. The floor standing speakers are Studio 60/v.2 speakers (specs below), the surround bookshelf speakers are Studio 20/v.2 (specs below). The subwoofer is a PS 1000 (specs below) and center is a Studio CC/v.2 (specs below) All match in a black ash finish. There are no tears in the mesh coverings and the finishes only show small blemishes. The set is in good condition and work perfectly. This amazing high-end speaker set will blow the roof off your house or apartment. The sound is phenomenal! THESE SPEAKERS ARE AVAILABLE FOR PICKUP ONLY. I am located in northern Westchester county in NY. If you can drive here to pick up the speaker set, that's the easiest way. The speakers are very heavy and shipping cost will have to be determined.
Specifications below: Studio 60 v2 Specifications
Design
3 driver, 2-1/2-way Tower / Floorstander
Crossover
3rd order electro/acoustic at 1.5kHz, 2nd order electro/acoustic at 400Hz
Frequency Response On-Axis
±2dB from 42 Hz - 22 kHz
Frequency Response 30° Off-Axis
±2dB from 42 Hz - 20 kHz
High Frequency Driver
25mm (1 in) PAL™ pure-aluminum dome, diecast heatsink chassis, ferro-fluid cooled
Mid/Bass Frequency Driver
170mm (6-3/4 in), MLP™ mica-polymer cone, AVS™ diecast heatsink chassis, 38mm voice-coil
Low Frequency Driver
170mm (6-3/4 in), filled polypropylene cone, AVS™ diecast heatsink chassis, 38mm voice-coil
Low Frequency Extension
30Hz (DIN)
Sensitivity Room / Anechoic
90 dB / 87 dB
Impedance
Compatible with 8 ohms
Suitable Amplifier Power Range
15 - 200 watts
Maximum Input Power
150 watts
Weight
140 lbs. (64 kg)
Dimensions HxWxD
36.5" × 8.25" × 15.25"
(93cm × 21cm × 39cm)
Design
2-driver, 2-way bookshelf / stand-mounted
Crossover
3rd order electro/acoustic at 1.5kHz
Frequency Response On-Axis
±2dB from 54 Hz - 22 kHz
Frequency Response 30° Off-Axis
±2dB from 54 Hz - 20 kHz
High Frequency Driver
25mm (1 in) PAL™ pure-aluminum dome, diecast heatsink chassis, ferro-fluid cooled
Mid/Bass Frequency Driver
170mm (6-3/4 in), MLP™ mica-polymer cone, AVS™ diecast heatsink chassis, 38mm voice-coil
Low Frequency Extension
38Hz (DIN)
Sensitivity Room / Anechoic
89 dB / 86 dB
Impedance
Compatible with 8 ohms
Suitable Amplifier Power Range
15 - 150 watts
Maximum Input Power
100 watts
Weight
50 lbs. (23 kg)
Dimensions HxWxD
14.5" × 8.75" × 11.375"
(37cm × 21cm × 29cm)
PS-1000 Specifications
Design
Single driver, DCBS™ system with high velocity resistive ports and built-in amplifier
Amplifier
High current, hybrid output, 130 watts RMS
Amplifier Features
Powersaver auto-on/off, soft clipping, thermal protection
Low Frequency Driver
255mm, polypropylene cone, Apicial™ former
Low Frequency Extension
25 Hz (DIN)
Sub / Sat Phase Alignment
0 - 180
Finishes
Black Ash
Inputs
From A/V receiver/processor or preamp left/right output; From receiver/amplifier speaker terminals or Paradigm X-Series Control Unit or main/satellite speaker terminals
Weight
58 lbs. (26.5 kg)
Dimensions HxWxD
16.75" × 17" × 19"
(43cm × 44cm × 49cm)
Design
3 driver, 2-way, video shielded, Center Channel
Crossover
4rd order electro acoustic at 1.5kHz
Frequency Response On-Axis
±2dB from 70 Hz - 22 kHz
Frequency Response 30° Off-Axis
±2dB from 70 Hz - 20 kHz
High Frequency Driver
25mm (1 in) PAL™ pure-aluminum dome, diecast heatsink chassis, ferro-fluid cooled
Mid/Bass Frequency Driver
Two 170mm (6-3/4 in), MLP™ mica-polymer cone, AVS™ diecast heatsink chassis, 25mm voice-coil
Low Frequency Extension
42Hz (DIN)
Sensitivity Room / Anechoic
90 dB / 87 dB
Impedance
Compatible with 8 ohms
Suitable Amplifier Power Range
15 - 175 watts
Maximum Input Power
130 watts
Weight
32 lbs. (15 kg)
Dimensions HxWxD
8.063" × 22" × 11.625"
(21cm × 56cm × 30cm)
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 7 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.