Halcro SSP100 (SSP 200 Upgraded) Rare High End Processor

I own a mid to high end Audio and Home theater store. I became a Halcro dealer with plans to build a dedicated room in my home to try to achieve the ultimate system for both Home Theater and 2 channel music listening. I bought the equipment but for various reasons never built the room. Since then the Halcro equipment has been used in my noisy ( furnace ), low ceiling, basement Home Theater room. Over time I’ve developed a nice small room 2 channel system ( ARC VSi60 with Diapason Adamantes and a Vandersteen Subwoofer) in my office at home. I found that I was doing most of my music listening in my home office so I realized that the Halcro was overkill in my basement so I replaced it with a Denon AVR 4311 Surround receiver. I am listing my Halcro SSP-100 that was sent back to Halcro to be updated to a SSP-200 version. I used the Halcro MC 50 five channel amp with the processor. My basement was not ideal for 7 channel use so I never opened the Halcro MC 20 channel amp that was bought for use in my dedicated room as the front L/R for surround or 2 channel L/R amp. These three products are being listed simultaneously but separately so that you can choose any one or any combination of the three. This is the processor that started out as a SSP100 but was upgraded by Halcro to the SSP200 spec. I have the box, original packing material, manual, remote ( I did not use it. I used a Harmony universal remote instead) and all accessories. The SSP200 listed for $11,890.00. I am starting this unit at $4500.00. Rare High End Processor Specifications and Features A U D IO Connections •10 unbalanced analog audio inputs •4 coaxial digital audio inputs •2 optical digital audio inputs •1 AES/EBU digital audio input •7.1 channel balanced multi-channel input with analog bypass •Left and right channel balanced input assignable to any source, and can be routed via DSP •7.1 channel unbalanced multi-channel input with analog bypass •7.1 channel balanced multi-channel output •7.1 channel unbalanced multi-channel output •4 special, programmable output channels •2 analog recording outputs •1 optical digital audio output •Tape loop (1 stereo input, 1 stereo output) •1 Independent analog audio Zone with 1 stereo output Features •Automatic signal type recognition and decoding •Supported formats: Dolby™ Digital, DTS™, DTS-ES (Matrix 6.1, Discrete 6.1), MPEG and PCM audio signal formats are supported •THX Ultra2™, THX Surround EX, Dolby Pro Logic II, DTS Neo:6 and PCM 24/96 processing •Downmixing to stereo and mono •Auxiliary Manager for creating additional channels (channels 9 & 10 for stereo subwoofers, ceiling speakers, etc.) •Patented High Dynamic Bass (HDB) circuitry for advanced bass management •Autocalibration of speaker levels & dist. with calibration Mic •Adjustable Lipsync function up to 150ms •5 user assignable preset settings for trim controls plus ‘Flat Trims’ and ‘No Change’ options V I D EO Connections •4 HDMI inputs •1 HDMI output •4 component video inputs •1 component video output •6 S-video inputs •2 S-video outputs w/o OSD •1 S-video output w/ OSD •6 composite video inputs •2 composite video outputs w/o OSD •1 composite video output w/ OSD •1 composite video output for independent zone Features •Supports HDTV, NTSC, PAL & SECAM standards •Component Video bypass switching (up to HDTV 1080p compatible) •HDMI bypass switching (DTV 480i/576i/480p/576p/720p/ 1080i compatible, PC VGA/ XGA/SXGA compatible) •DVI support (via DVI to HDMI adapter) •Composite, S-video to component up-conversion •Composite, S-video to HDMI conversion •Component Video to HDMI conversion •Component Video and HDMI OSD output •Component Video de-interlacing (interlaced to progressive translation, e.g. 480i to 480p) •Composite, S-video to component conversion + de-interlacing •Component Video scaling up to HDTV 1080p •Composite, S-video de-interlacing scaling up to HDTV 1080p •Composite, S-video de-interlacing + scaling to HDMI output •Component video de-interlacing + scaling to HDMI output •HDMI de-interlacing and scaling •Front panel TFT display supports composite, S-video, component 480i/p, 576i/p, HDMI 480i/p, 576i/p •Other video processing features for example: - Brightness, contrast, hue and saturation control - LTI (Luminance Transition Improvement), CTI (Chrominance Transition Improvement) - FRC (Frame Rate Conversion) U S E R I N T E R F A CE •Digital 7” widescreen video display with Wide VGA resolution •On Screen Display with superimpose •Multi-function rotary encoder •Programmable touch screen remote control D I M E N S I O NS •Weight: 30.9lb or 14.0kg •Height: 7 inches or 169mm •Width: 17 inches or 438 mm •Depth: 16 inches or 410mm O T H ER •RS232 and USB connectors in front and rear panels for SW upgrades, setup and home automation support •2 IR inputs for external IR receivers •3 configurable trigger outputs