Lexicon Processor MC-12

This unit is in great shape. No scratches and always connected to a PS Audio Power Plant. This is not the HD or balanced version. Priced to sell. Paypal and shipping fees extra.

Summary Specifications
● Codecs: Dolby Digital, Dolby EX, Dolby Pro Logic II, DTS, DTS ES, DTS ES Discrete, DTS Neo:6, DTS 24/96, HDCD
● Digital Audio Inputs: 6 S/PDIF RCA, 6 S/PDIF Toslink, 1 XLR
● Audio Outputs: 12 RCA, 12 XLR, Including 2 for Future Use
● 4 Analog Devices SHARC� 32-bit DSP Engines
● THX� Ultra Certified
● Cirrus Logic's Crystal� CS49326 DSP decoder
● Input Impedance: 100 kOhms
● MFR: 10 Hz - 40 kHz - 0.75 dB
● THD: 0.003%
● 24/96 A/D, 24/192 D/A
● Zone 2 Operation
● Video Switching: Component Video at 300 MHz
● Size: 6.6" H x 17.3" W x 14.8" D
● Weight: 45 Pounds
● Original MSRP: $10,000
Detailed Specifications

Analog Audio Inputs Eight stereo pairs (RCA) or five stereo pairs and one 5.1-channelanalog input
Digital Audio Inputs Six S/PDIF coaxial (RCA), six S/PDIF optical (five TosLink, and
one optical mini jack), one AES/EBU (XLR); coaxial and optical inputs conform to IEC-958, S/PDIF standards
Sample Rates: 44.1, 48, 88.2, 96kHz Accepts: 16-24 bits PCM audio, Dolby Digital, DTS and DTS-ES discrete data formats
Main Audio Outputs Twelve unbalanced (RCA) connectors for Front L/R, Center, LFE, Subwoofer L/R, Side L/R, Rear L/R, Auxiliary L/R
Zone 2 Audio Outputs Two stereo pairs (RCA, one fixed and one variable output level
Record Audio Outputs Two stereo pairs (RCA, one fixed and one variable output level); one coaxial (RCA) S/PDIF and one optical (TosLink) S/PDIF output (in parallel)
Performance (Main Zone)
Analog-to-Digital Conversion 24-bit, 96kHz, dual-bit S• architecture
Digital-to-Analog Conversion 24-bit, 44.1 to 192kHz, multi-bit S• architecture, operating in dual-mono mode
Frequency Response 10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40 kHz ,reference 1kHz
THD + Noise Below 0.008% at 1kHz, maximum output level
Dynamic Range 108dB minimum, 111dB typical, 22kHz bandwidth
Signal-to-Noise Ratio 108dB minimum, 111dB typical, 22kHz bandwidth
Input Sensitivity 200mVrms (2Vrms for maximum output level) at 0dB input gain
Input Impedance 100k½ in parallel with 150pF
Output Level 150mVrms typical, 6Vrms maximum (RCA outputs); 300mVrms typ, 12Vrms maximum (XLR outputs, MC-12 Balanced only).Maximum value with full-scale input signal and volume at +12dB
Output Impedance 100½ in parallel with 150pF (RCA outputs).
Performance (Zone 2 and Record Zone)
Analog-to-Digital Conversion 24-bit, 44.1 to 96kHz, dual-bit S•architecture (Record Zone only)
Digital-to-Analog Conversion 24-bit, 44.1 to 192kHz, multi-bit S• architecture
Frequency Response 10Hz to 20kHz, +0.1dB/-0.25dB,-0.75dB at 40kHz, reference 1kHz
THD + Noise Below 0.008% at 1kHz, maximum output level
Dynamic Range 105dB minimum, 108dB typical, 22kHz bandwidth
Signal-to-Noise Ratio 105dB minimum, 108dB typical, 22kHz bandwidth
Input Sensitivity 200mVrms (4Vrms for maximum output level)
Input Impedance 100k½ in parallel with 150pF
Output Level 200mVrms typical, 4Vrms maximum (RCA outputs); 400mVrms
typical,; maximum value with full-scale input signal and volume at 0dB
Output Impedance 100½ in parallel with 150pF (RCA outputs)
Video Inputs and Outputs
Video Inputs Five composite (RCA), eight S-video, and
four component video (three RCA, one BNC)
Video Outputs Four composite (RCA, two monitor and two record), four
S-video (two monitor and two record), and one component
(BNC)
Performance (Composite & S-video)
Compatibility NTSC, PAL, and SECAM
Switching Active
Output Level 1.0V peak-to-peak
Impedance 75½
Input Return Loss >40dB
Differential Gain <0.5%
Differential Phase <0.5°
Bandwidth >25MHz
K Factor <0.3%
Gain ±0.15dB
Signal/Noise Ratio >70dB
Frequency Response 10Hz to 10MHz + 0.1/-0.3dB