This is for a pair of excellent condition Emotiva XPR-1 monoblocks. I am original owner and these are still in warranty. The remaining warranty can be transferred to the new owner and will expire 3/14/2019. These are very heavy at about 112 lbs per box. FedEx shipping (fully insured, signature required) to the furthest location of continental USA would be $354 (I will not ship these to Hawaii or Alaska). If you are within California, shipping can be as low as $254. Local pickup/meetup is also fine as long as paypal pre-payment is done. If actual shipping cost is less than $354, I will refund the difference. They are packed in original very heavy duty double-box and will be taped and strapped. If you want to setup your own shipping from a freight company that is in reasonable distance from my location, I am perfectly fine with that.
The following describes the extras/upgrades I will include. The stock fuse clips used in this amp are very poor quality and use very weak metal that did not grip the fuses well. These have been removed and new fuse clips with very strong clamping soldered in (clips made by Littlefuse company). In addition, one fuse clip in each pair is open ended, which solves the problem of the fuse clips mounted too close on the circuit board. The stock fuse clips would not allow a good seating/contact with a fuse that was longer than 31.8mm (which is very typical in upgrade fuses).
Furutech fuses are installed and included with these amplifiers. I have found these Furutech fuses bring out the most resolution in these amps, which is excellent. These Furutech and other fuses are essentially $300 in upgrades for these amps.
In addition, I will also include these fuses with each amp:
2 x 15A stock fuses
2 x 15A Hi-Fi Tuning Gold
2 x 16A Synergistic SR20
2 x 15A Isoclean
If the two Furutech fuses are too bright for your speakers, I have found that the combination of one Furutech and one Isoclean gives a great balance of warmth and detail. The following is a collection of my recordings with these Emotiva XPR-1 amplifiers in action:
Power: 1,000 Watts RMS into 8 ohms
Power: 1,750 Watts RMS into 4 ohms
Input Impedance: 100k ohms RCA, 51k ohms XLR
Dimensions: 9.5” H x 17” W x 19.5” D
Weight: 99 lbs