SpectralDMA-360usedSpectral DMA-360 Monoblocks in Boxes NY/NJ/CT . TRADES OK**Please be sure and check out our newly launched website with additional items for sale** www.skyfiaudio.com/collections/all Monaural amplifiers from the legendary american maker Spectral. This...8499.00

Spectral DMA-360 Monoblocks in Boxes NY/NJ/CT . TRADES OK [Expired]

no longer for sale

**Please be sure and check out our newly launched website with additional items for sale** www.skyfiaudio.com/collections/all

Monaural amplifiers from the legendary american maker Spectral.  This auction is for 2 units with manuals, boxes and power cords.  I would rate these 10/10 functionally and 8/10 cosmetically. New double boxes were just purchased from Spectral and were quite expensive.  The puppies are rated at 300W each at 8ohms and 533W at 4ohms.  Internal and external construction and component quality is the highest I've ever seen.  Cosmetically the exterior is in very good shape with no significant scratches or dents as visible in the pictures.  One of the unit has some discoloration on the plastic insert front panel only visible when the unit is powered off, just above the logo and barely visible on the pictures.  The tops do not have any scratches and the aluminum faceplates are clean except for one small nick visible in the pictures.  The heatsinks are free of scratches or dents.  Matching MIT interconnects, power cables and speaker cables are also available but not included in this auction.  Available for pickup and audition in northern NJ and Union Square NYC.   Call 646 852 2073  
All high end trades (working or broken) welcomed.  Let me know what you got.  

From the spectral literature:
Specifications DMA-360 Monaural Power AmplifierPower Output
(continuous):@ 8 ohms - 300 Watts RMS
@ 4 ohms - 533 Watts RMS
@ 2 ohms - 680 Watts RMSOutput Compliment:90 Amps peakFrequency Response:+-0.1 dB, DC - 150 KHz
+-1 dB, DC - 1 MHz
+-3 dB, DC - 1.8 MHzDistortionStatic:less than 0.015% from DC
to 100 KHz, typically
0.009% @ 300 WRMS/8 ohmsDynamic:8 Tone Cluster Test 20
KHz @ 500 Hz separation
0.01% @ 8 ohms
0.015% @ 4 ohmsSpeed:Risetime:less than 300 nanosecondsSettling:1.5 microseconds to -40 dBSlew Rate:600 volts/microsecondNoise:Signal to Noise:97 dB nweighted,
107 dB ASA ACrosstalk:98 dB @ full power 8 ohmsInput:Impedance:10k ohmsSensitivity:1.5 volts / nominal outputPower Supply:Line Voltage:100 volts, 120 volts,
240 volts (internal wiring)AC Voltage Range:+-10%Maximum Consumption:2000 WattsQuiescent Consumption:250 Watts Operating Temperature:0 deg. to +50 deg. Cesius range,
32 deg. to +122 deg. FahrenheitProtection Features:DC Protection Servo:.5 volt rangeCurrent Limit Onset:90 AmpsThermal Threshold:Protects at 85 deg. Censius,
185 deg. Fahrenheit AC Main Fuses:120v 5A or 220v 2.5A slo bloSize and Weight:Dimensions:20" (50.8 cm) W,
7.23" (18.4 cm) H,
19.6" (49.9 cm) D,
Weight:67 lbs, 30.4 KG NetAll information and specifications provided herein are subject to change owing to the evolutionary nature of Spectral designs and technology.
All Spectral products are covered by a three-year limited warranty for parts and labor.The DMA-360 Monaural Reference Amplifier
    The DMA-360 Monaural Reference Amplifier is the first limited production monaural amplifier from Spectral Audio. The DMA-360 is also the most powerful high-speed amplifier ever developed for high-end music applications. An impressive array of engineering "firsts" in the DMA-360 culminate seventeen years of high-speed fet design to produce the "ultimate" Spectral amplifier.

    Spectral engineers pioneered the invention of high-speed fet audio amplifiers in the early 1980s with the wideband DMA-100 Class A instrumentation amplifier. From these innovative beginnings, Spectral has evolved increasingly powerful and sophisticated megahertz amplification for applications in the Spectral component system. Today these high-resolution amplifiers feature greater speed and settling capability combined with higher voltage and current than previously possible. The DMA-360 Monaural Reference is now the ultimate realization of this quest to achieve uncompromising amplification true to the live musical experience.

    From much listening and design experimentation, Spectral has consistently pursued component systems having ultra-fast settling, high-speed circuit architecture. These have invariably out-performed more traditional often cumbersome high-end design methods to achieve superlative detail, staging and listener involvement. Indeed, test methodology simulating music waveforms and hearing acuity confirm that quickness of response and rapid signal extinction when reproducing complex dynamics are mandatory for accurate music reproduction. Only then can one preserve instantaneous waveform accuracy to prevent cover-up of delicate musical signals by previous events. Construction and performance of the Spectral DMA-360 Monaural Reference Amplifier for this demanding criterion and resulting sonic resolution are unmatched among contemporary high-end amplifier designs.


The very high-speed launch and enormous current reserves of the DMA-360 are made possible with the use of Spectral's proprietary "Focused Array" construction. This breakthrough topology aligns high-current vertical fet output devices for rapid, pistonic signal launch. The output section is comprised of eight individual V-FET amplifier modules paralleled to achieve a minimum 300 watt RMS output with 90 amp capability, and full rated power is delivered with absolute load stability at an unprecedented 1 MHz. Output current is approximately double that of any previous high-speed amplifier design. The "Focused Array" output section design of the DMA-360 makes possible the practical use of ultra-fast vertical fet devices for the first time in a high powered audio application. Each device, having vacuum tube like operating character, is energized from its own dedicated high energy storage capacitor, rectifier, and individually powered from an isolated ultra-low coupled transformer winding. Individual teflon bias trimmers calibrate each V-FET output device separately for maximum linearity and precise alignment. Groups of these individually powered output sections utilize field folded RF type construction and electronic shielding to banish noise and eliminate low level propagation of stray interference. The resulting "Focused Array" of eight individually powered output sections performs as one with virtually no cross-coupling or energy storage artifacts reflecting between output devices. During extreme program dynamics, this arrangement can launch an instantaneous high-current drive of over 90 amps to the most sophisticated loudspeakers with unprecedented waveform tracing precision. Gone are performance damaging magnetic and electrical field propagation problems of conventional high-powered amplifier construction. Without stray radiation, critical small signal paths within the DMA-360 can perform with lowest possible distortion and settle to signal extinction in millionths of a second. Hence, the DMA-360 works with high power and great speed yet behaves inert to other system components. Reproduction is extremely articulate and naturally resolving yet has all the powerful unlimited sonic character of the most brutal high power amplifier designs.THE POWER VAULT
The Focused Power output section of the DMA-360 is only one of the many Spectral innovations designed to create the ultimate in amplifier control and resolution. A unique transformer architecture supports the critical requirements for lowest noise and high power capability of the powered output section array. In traditional high-end power amplifiers, output transformers are located away from active amplifier circuitry for purposes of noise isolation and construction ease. This virtually universal method extracts a significant sonic price, however, because of the speed and regulation losses which are imposed by the long power supply wiring harness. In addition, the EMI and noise which radiate from the supply harness invariably contaminate sensitive low level circuitry by noise modulating the musical signal. Spectral engineers have long recognized the problems associated with power supply noise contamination and have proposed a unique solution in the DMA-360 Monaural Reference Amplifier. The Power Vault electromagnetic field containment system virtually eliminates EMI radiation to the amplifier signal path circuitry as well as power and regulation losses through the traditional power supply harness. The architecture starts with Spectral's elaborate high performance custom power supply transformers. These unique designs are the result of years of research and development to maximize isolation and regulation. Each transformer features individual isolated windings to support each individual output transistor in the amplifier output section. The twin power transformers are mounted between massive machined mounting plates for damping and resonance control. The combined 38 lb. Transformer structure is then mounted on a constrained rubber floating suspension system similar to a fine turntable suspension. The finished transformer assembly is then suspended inside an EMI, RFI tight welded aluminum containment box located directly beneath the DMA-360 output section. The resulting transformer Power Vault containment system results in an uncompromising solution to the universal power supply noise problem. The high-current power transformers are now intimately sited next to their own high-current output devices with extraordinary noise isolation. The high-speed driver circuitry of the DMA-360 operates in a pristine environment free of the noise radiation and phantom signals which plague other power amplifiers. Dynamic range limitations are removed with a sonic clarity and quietude which are palpable. ULTRA PREMIUM DISCRETE CIRCUITY
Small signal circuitry is based on Spectral's proven discrete circuit multiple cascode double push-pull FET technology. Premium silicon array construction, similar to circuitry in the DMC-20 Reference Preamplifier, is applied to the DMA-360 to achieve enormous internal dynamic range capability. This reserve is linear class A with many times greater dynamic capability than program demands. It allows high current drive for quick controlled response from the very large output V-FETs as well as isolation from their internal electronic activity. Unhindered by interferences and slow cumbersome response of conventional practice, these parts operate with unyielding control and exacting precision. Reproduction is clean, effortless and highly holographic. Audio amplification paths through the DMA-360 are direct, inherently linear and simple. These minimalist configurations have always sounded and measured best but normally become ponderous and overburdened when protection and support functions are added. The DMA-360 takes a different route to solve the sonic problems of amplifier protection circuitry. To maintain the pristine signal path, a sophisticated analog computing ancillary system is thermal and opto coupled within the amplifier. This "hands off" operational management system observes device loading and power dissipation as well as speaker damaging out of range signals. It takes control without circuitous cross interfering connections to electronics in the signal path, leaving the musical signal pure and totally untouched. A REMARKABLE TOPOLOGY
The DMA-360 utilizes custom FETs and high speed bipolar transistors in a dense, fully balanced topology to achieve high-current launch and ultra-fast settling capability. RF (radio frequency) design techniques are employed to achieve a DC coupled power band with intrinsic bandwidth to almost 5 MHz!

Input Stage.
The shielded input stage utilizes a balanced, double cascode design using matched differential pairs of J-FETs. The cascode design derives its own ground reference and produces extremely high levels of isolation from the preamplifier and between the stages of the DMA-360 itself.

Gain Stage.
The gain stage utilizes super high frequency (RF) bipolar transistors matched in a cascode configuration to bring the circuit gain into the power device realm.

Output Stage.
The output stage consists of eight individually powered VMOS-FET output amplifiers. This precision amplifier array features individual push-pull drivers, high-speed power supplies and individual biasing to function as a single ultra-fast, high current output section. The result of these techniques is unprecedented fast settling and remarkable intertransient silence.


Radical improvements in high-current FET topologies, power supply design, and innovative new protection systems are combined in the DMA-360 to advance the art of amplifier design. Until now, amplifiers could not offer both powerful speaker control, and the life-like sonic transparency possible only with high-speed, fast settling discrete circuitry. The DMA-360 defies the status quo, achieving extreme high-power with the fastest most delicately detailed signal reproduction yet attained. This ultra-fast response and high-current capability allow the DMA-360 to demonstrate tremendous performance advantage over other large high-end amplifiers, especially in terms of overall transparency and aliveness. Now that the traditional trade-off between sonic refinement and power is transcended, music enthusiasts need not compromise. The DMA-360 Monaural Reference is the ultimate Spectral amplifier revealing new levels of accuracy and realism from all of today's finest loudspeakers.


This item will be professionally packaged and insured for safe transit to your home.   

If we don’t have the original manufacture's packaging, we use heavy duty double ply corrugated boxes with Instapak expanding foam custom inserts.  In many cases this has proven to be better than the original packaging.  We also use high quality fiber reinforced tape to seal our packages.  Lightweight items will be bubble wrapped and shipped in a high-quality box. 

This item is available for pickup in Ridgewood, NJ or Union Square, NYC (with convenient parking in the building).

NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.

Use the Buy It Now button and we will cover the PayPal fees.

Thanks for looking and be sure to call or text 646.852.2073 with any questions. 

Please also be sure and visit our Audiogon e-store to see the rest of the items we have for sale www.audiogon.com/stores/skyfi

**And be sure to check out our newly launched website with additional items for sale** www.skyfiaudio.com/collections/all



Skyfi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high end audio equipment.  We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, and no junk. 

Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold.  We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.

Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project, and Sony ES, we have access to OEM parts, service, and support.  If you are local and are looking for any new equipment for the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area


We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and its nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers. 

If you do not see a “Make an Offer” button, it means we are not considering any offers on that item.   


We prefer working through PayPal, which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees if you purchase the item at the asking price.  You can also send us a personal check (which will need to clear before shipping), certified check, money order, or wire transfer. International clients without access to PayPal should use a bank wire transfer. 

If you are picking up an item, we do not accept PayPal.  You must pay in person with cash, certified or bank check, or wire transfer.  If you make a PayPal payment and are picking up the item, it will be returned. 


We accept trade-ins of equal or lesser value under certain conditions.  Simply ask and let us know the exact model, condition, and the accessories that are included.  Such as the original box, remote, manual, etc.  We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated processors, and mid-fi equipment of any type.  We will offer a fair value for your equipment, but keep in mind we are running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment.  If you are looking for top dollar we suggest attempting to sell it directly to an end user on your own.

SELL US YOUR GEAR (Working or Broken)

We will also purchase your used or broken gear and arrange pickup if you are in our local market.  Just drop us a note for a quote but be sure to include the condition and what is included. 


We are currently operating from a residence in Ridgewood, NJ.  You are welcome to make an appointment if there is a piece of equipment you would like to see in operation before or after purchase.  We have a well-equipped, dedicated listening room with tons of equipment of all makes and models.  We are not a store, so please don’t make an appointment if you are just curious as to how a speaker or piece of equipment sounds.  In essence, no tire kickers please.

If you are in NYC and cannot make it out to Ridgewood, we can arrange pickup in Union Square (14th Street) after the purchase.   You can call or text 646.852.2073 with any questions or to schedule an appointment.  We can also arrange to install, calibrate, and tune the gear in your listening room if you are local to the area.  This is super useful when purchasing large speakers or heavy amplifiers.  It is also great for ensuring your new turntable is setup correctly in its final resting place.  

Thanks for looking and please send us your email address if you would like to receive a list of the equipment we receive from time to time.  We promise not to bombard you with junk email.   


skyfi member since January 2012

skyfi.nyc  Verified Dealer
Last 12 months
Items from this seller