Anthem MCA-325 225 X 3 Power Amp-Barely Used

We have a client that has changed his system from a 5.1 to a 2
Channel System and no longer need this amp

225W in 3-Channels 

• Delivers lower THD (Total Harmonic Distortion) for cleaner, pure sound and
lower noise 

• Completely redesigned for improved audio performance and reliability 

• Higher current output for lower distortion 

• Cosmetic match for AVM 60 A/V Preamplifier-Processor 

• Improved Advanced Load Monitoring system 

• 8 bipolar output devices per channel for less stress on each device 

• Less than 2 watts standby power consumption 

• Crafted in Canada

INPUTS / OUTPUTS 

•Inputs Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack) 

•Outputs Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)

SWITCHES 

•Front Panel Power (On/Off) 

•Rear Panel 3 On/Off Modes (Trigger, Manual, Auto)

THD AT 100W 

•at 1 kHz 0.0010% 

•at 20 kHz 0.015%

IMD AT 100 W 

•ITU-R (19 kHz + 20 kHz) 0.0005% 

•SMPTE (60 Hz + 7 kHz) 0.002%

FREQUENCY RESPONSE, 20 HZ TO 20 KHZ 

•open circuit ± 0.1 dB 

•8Ω ± 0.1 dB 

•4Ω ± 0.1 dB 

•2Ω ± 0.2 dB

OTHER SPECIFICATIONS 

•SNR, IEC-A, ref. 225 W 120 dB 

•Power Bandwidth, -3 dB at 200 W into 8 ohms 90 kHz 

•Slew Rate 30 V/μs 

•Damping Factor, 20 Hz to 1 kHz 300 

•Channel Separation, 100 Hz to 10 kHz >65 dB 

•Input Impedance (RCA / XLR) 10 kΩ / 15 kΩ 

•Input Sensitivity, 225 W into 8 Ω 1.5 Vrms 

•Voltage Gain 29 dB