120 Watts RMS per channel into 8 Ohms. Both channels driven from 20Hz
to 20kHz at less than 0.1% total harmonic distortion.
are five sets of inputs—tuner, tape, CD, VCR, and auxiliary—and one set
of preamp outputs. On the front are record, source, and volume
controls. All controls and inputs are laid out in a sensible fashion.
Frequency Response: 20Hz to 20kHz ± 0.2dB. 0dB at 0Hz and -3dB at 70kHz.
Distortion: Typically <0.05% THD at rated power. 0.1% THD & IM worst case prior to clipping.
Current Output: 20A short duration peak per channel. Fuse protected.
Hum & Noise: 90dB below rated output 20Hz to 20kHz unweighted.
Input Sensitivity: 290mV RMS for rated output at 1kHz.
Input Impedance: 47k Ohms.
Input Overload: 5V RMS
Rated Pre Out Level: 1.5V RMS into 47k Ohms or higher.
Pre Out Source Impedance: Typically 1.5k Ohms.
Pre Out Minimum Recommended Load: 47k Ohms
Tape Output Level: Unity Gain at 200mV. Tape loop muting at 5V RMS input.
Dimensions: Height 105mm (4"), Width 450mm (17.75"), Depth 400mm (15.75"), Weight 10kg (22lb)