**Please click here to check out our newly launched SkyFi Audio website with additional items for sale**
Unfamiliar with Conrad-Johnson? Here's some background from their official website:
"the conrad-johnson story
In the mid-1970s, two economists—friends and serious audiophiles—Dr. William Conrad and Dr. Lewis Johnson—were highly dissatisfied with the commercially available equipment of the time and were also perplexed and challenged by the readily apparent sonic differences among components in their own systems. What made these two classic tube systems sound so different? Could the virtues of each be somehow combined? Not content to merely speculate on such issues, Conrad and Johnson decided to systematically investigate by developing and refining a vacuum-tube preamplifier.
The resulting conrad-johnson preamplifier was immediately recognized as a state of the art contender and catapulted Conrad and Johnson into the audio industry."
This all-tube beautifully understated preamplifier has simple looking yet fully functional controls laid out across its front panel.
Large & luxurious solid control knobs allow you to select your source, choose your output mode (Stereo, Reverse, Mono, Left, Right), adjust overall balance, and of course adjust the volume. Care was obviously taken in the placement of these controls as Volume is all the way to the right, exactly where your hand first wants to land to adjust the output to your amplifier(s).
Specifics on the PV8 direct from Conrad-Johnson:
"The PV8 superceded the PV5.
It was the first all-tube zero-feedback design from conrad-johnson.
The basic audio circuit of the PV8 is modular, built from individual gain blocks consisting of a triode amplifier direct coupled to a cathode follower.
The phono stage consists of a gain block, a passive RIAA network, and a second gain block. The line stage consists of a single gain block. These stages use polypropylene capacitors bypassed by a polystyrene capacitor for the output stages.
Even the main dc power supplies used polypropylene capacitors – there are no electrolytic capacitors in the audio circuits or their related power supplies. Paralleled triode sections at the phono input yield nearly 3 dB improvements in the signal to noise ratio over a single input tube (as used in the earlier PV5)."
Replacement Tube Set RT8
V1 & V2: 12AX7 | V3 & V5: 5751 | V4 & V6: 5965
Monitor and recording facilities for two tape decks with dubbing from Tape 1 to Tape 2
One main output
Auto-muting to suppress warm up transients
Tape 1/Tape 2
Mode (Reverse, Stereo, Mono)
Gain: Stage 47 dB (phono overload 200 mV at 1kHz)
Line Stage 31 dB
Distortion: less than .1% THD or IMD
Response: bandpass 2Hz to more than 100kHz
RIAA Equalization: +/- .25 dB (20 to 20 kHz)
S/N Ratio: Phono Stage 76 dB below 10 mv input
Line Stage 85 dB below 2.5 volt output
Phase: Line Stage phase inverting, Phono Stage phase correct
19″ X 3″ x 12″
Click here for a PDF copy of the Owner's Manual
Thanks for looking and please click here if you would like to receive a list of the equipment we receive from time to time. We promise not to bombard you with junk email.
PURCHASING FROM SKYFI
This item will be professionally packaged and insured for safe transit to your home.
Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.
If we don’t have the original manufacture's packaging, we use heavy duty double ply corrugated boxes with Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging. We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box.
This item is available for pickup in Ridgewood, NJ or Union Square, NYC (with convenient parking in the building).
NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.
Use the Buy It Now button and we will cover the PayPal fees.
Thanks for looking and be sure to call or text 646.852.2073 with any questions.
Please also click here to visit our Audiogon store to see the rest of the items we have for sale.
WHO WE ARE
SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high-end audio equipment. We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, no junk.
Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.
Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Pro-Ject Audio Systems, and Sony ES, we have access to OEM parts, service, and support. If you are local and looking for new equipment from the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area.
We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers.
If you do not see a “Make an Offer” button, it means we are not considering any offers on that item.
We prefer working through PayPal which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees if you purchase the item at the asking price. You can also send us a personal check (which will need to clear before shipping), certified check, money order, or wire transfer. International clients without access to PayPal should use a bank wire transfer.
If you are picking up an item we do not accept PayPal. You must pay in person with cash, certified or bank check, or wire transfer. If you make a PayPal payment and are picking up the item, it will be returned.
TRADE IN POLICY
We accept trade-ins of equal or lesser value under certain conditions. Simply ask and let us know the exact model, condition, and the accessories that are included (such as the original box, remote, cables, manual, etc.). We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type. We will offer a fair value for your equipment, but keep in mind we are running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment. If you are looking for top dollar we suggest attempting to sell it directly to an end user on your own.
SELL US YOUR GEAR (Working or Broken)
We will also purchase your used or broken gear and arrange pickup if you are in our local market. Just drop us a note for a quote but be sure to include the condition and what is included.
HOW TO VISIT US
We are currently operating from a residence in Ridgewood, NJ. You are welcome to make an appointment if there is a piece of equipment you would like to see in operation before or after purchase. We have a well-equipped, dedicated listening room with tons of equipment of all makes and models. We are not a store, so please don’t make an appointment if you are just curious as to how a speaker or piece of equipment sounds. In essence, no tire kickers please.
If you are in NYC and cannot make it out to Ridgewood, we can arrange pickup in Union Square (14th Street) after the purchase. You can call or text 646.852.2073 with any questions or to schedule an appointment. We can also arrange to install, calibrate, and tune the gear in your listening room if you are local to the area. This is super useful when purchasing large speakers or heavy amplifiers. It is also great for ensuring your new turntable is setup correctly in its final resting place.