Schiit Audio Ragnorak 2 Open box (Fully Loaded)

Feel free to make offer. If you order direct from Schiit, you have to wait 10-12 weeks but we can ship to you immediately. This product get directly from Schiit dealer and the warranty will begin when you get the product. The Ragnarok 2 cover by Schiit 5 years warranty. It's come with USA Plug 230V but if you prefer we can switch to 115V.

Ragnarok 2 is the only modular, remote-controlled integrated amp that’s a great match for both speakers and headphones. Delivering full speaker power to the balanced headphone outputs, and debuting our all-new Nexus™ differential gain stage, Ragnarok delivers performance that completely befits its name—in Norse legend, Ragnarok was the “end of the world.”

Modular Flexibility, Remote Convenience Ragnarok 2 has two module slots that accept the same modules that many of our other products use, for flexibility and future upgradability. You can order Ragnarok 2 in one of two ways to suit your needs:

• Just An Amp: with two RCA input modules installed, for a total of two balanced inputs and three RCA inputs, ready for you to add all your line-level sources
• Fully Loaded: with a MM phono preamp and a True Multibit DAC, for a total of two balanced inputs, one RCA line-level input, one RCA phono input, and one USB DAC input—a single integrated solution for a variety of analog and digital needs

Both versions come with a standard milled aluminum remote control that allows you to select source, control volume, select headphone or speaker output, mute, and set gain.

Nexus™: One Stage To Rule Them Ragnarok 2 debuts our unique differential Nexus™ gain stage for seamless interaction between single-ended and balanced sources. Nexus converts single-ended inputs to balanced outputs, and balanced inputs to single-ended outputs—in a single gain discrete gain stage, without gain differences between modes, and with good performance in all modes.  
Power and Control for Speakers and Headphones Ragnarok 2 delivers 60W into 8 ohms and 100W into 4 ohms, for excellent performance with most speakers. It also delivers full power through the balanced headphone jack (24W into 32 ohms) and quarter-power output from the single-ended headphone jack (6W into 32 ohms). With selectable gains of 1, 8, and 25, it’s compatible with a wide range of speakers and headphones. 
Easiest 128-Step Relay-Switched Volume, Ever The benefits of a relay-switched stepped attenuator for volume are clear. Compared to a potentiometer, they give you essentially perfect channel matching and near-unmeasurable distortion. However, some preamps with relay-stepped attenuators confuse you with buttons and screens. Not Ragnarok 2. Ragnarok 2 has a volume knob that works just like a volume knob—just grab and turn. And if you use the remote control, the motorized potentiometer changes to match the remote setting.  
Designed and Built in California By “designed and built in California" this is what we mean: the vast majority of the total production cost of Ragnarok 2—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California.
Specification

Power Output, Speaker Outputs:
8 Ohms: 60W RMS per channel
4 Ohms: 100W RMS per channel

Power Output, Balanced Headphone Output:
32 Ohms: 24W RMS per channel
50 Ohms: 15W RMS per channel
300 Ohms: 3W RMS per channel
600 Ohms: 1.5W RMS per channel
 
Power Output, Single-Ended Headphone Output
32 Ohms: 6W RMS per channel
50 Ohms: 3.75W RMS per channel
300 Ohms: 750mW RMS per channel
600 Ohms: 375mW RMS per channel
 
Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-350KHz, -3dB
 
THD: <0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms 
IMD: <0.01%, CCIR, at 100W RMS into 8 ohms
 
SNR: >115db, A-weighted, referenced to full output 
 
Damping Factor: >80 into 8 ohms, 20-20kHz
 
Gain: 2, 8, or 25 (balanced, half those gains through headphone SE output)
 
Input Impedance: 10k ohms
 
Crosstalk: >95dB, 20-20kHz
 
Inputs: 
 
(2) pairs XLR balanced inputs
(1) RCA single-ended input
(2) Module slots, one small and one large
 
Topology: Nexus™ differential current feedback with nested differential stages 
 
Oversight: microprocessor-controlled monitoring and management of critical operational points, with relay shut-down for DC, overcurrent, thermal, and other faults
 
Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management. 
 
Power Consumption: 500W maximum 
 
Size: 16” x 13” x 3.875”
 
Weight: 32 lbs