Dynaudio Contour 30i Walnut

UniQue Home Audio
727-487-1869
uniquehomeaudiollc.com
[email protected]

We have a pair of Dynaudio Contour 30i available.  This pair was a customer trade in who moved to a smaller condo and downsized to bookshelf speakers.  We fully tested the speakers and play as designed.  We found no blemishes in the finish. Due to Agon Condition specs we had to put as an 8/10.  As always feel free to call to discuss.

From manufacturers web site:
 

Behind the scenes

We’ve endowed Contour 30i with two 18cm MSP drivers, as well as doubling up on the rear ports. Behind the scenes we’ve tweaked the spider suspension (the springy ring that keeps the woofer in the right place when it’s at rest, and controls it in the right way when it’s moving). This one is made from aramid fibres, and retains the ingenious structural properties from before (the ribs are of varying width to give even finer control over the cone’s excursion).

Contour 30i continues to use aluminium voice-coils, too. We can make them extremely light – but also bigger than the old-style copper units you’ll find elsewhere. Lighter weight allows larger diameters with more windings, yet low weight, which means we have more control over the cone movement. And that means more control over the sound – especially at high frequencies and high volumes – exactly what you need in a mid/bass driver. Sure, we experimented with small voice-coils on Contour i – the size other companies might use. The measurements said they should work for Contour i. Our ears said otherwise, so we went big. Our ears were right.

And, as with Contour 20i, the flatter frequency response from the improved tweeter and mid/bass drivers means we’ve been able to simplify the crossover. Not that it wasn’t elegant before – but now… well, we’ll let you judge.

 

Improved crossover

The improved crossover no longer needs impedance correction circuitry to optimise its performance – that’s all now done in the driver itself, simply down to the physical properties of the materials we use. Fewer components, cleaner signal path, better performance.

While our engineers and designers were hunkered down listening to everything from jazz, to classical, to metal, to electronica, the team in our on-site factory were scouring sustainable sources for high-quality materials and finishes. They make sure all Contour i's are furniture-grade: perfectly built, perfectly finished and perfectly packaged.

• StatusCurrent
• SegmentHome
• SeriesContour i
• TypeFloorstand
• Sensitivity (dB @ 2.83V/1m)87
• IEC Power Handling (W)300
• Rated Impedance (Ohm)4
• Lower Cutoff (Hz @ +/- 3 dB)32
• Upper Cutoff (kHz @ +/- 3 dB)23
• Box PrincipleBass reflex rear ported
• Crossover2.5-way
• Crossover Frequency (Hz)(300)/2200 Hz
• Crossover Topology2nd order
• Tweeter28mm Esotar 2i with Hexis
• Midrange/Woofer18 cm MSP
• Woofer18 cm MSP
• Weight kg31.4
• Weight lbs69.2
• Width mm215
• Height mm1140
• Depth mm360
• Width inches8 4/8
• Height inches44 7/8
• Depth inches14 1/8
• Width mm incl. feet/grill300
• Height mm incl. feet/grill1169
• Depth mm incl. feet/grill403
• Width inches incl. feet/grill11 6/8
• Height inches incl. feet/grill46
• Depth inches incl. feet/grill15 7/8
• GrilleBlack
• BaffleBlack Aluminium