Mark Levinson No 52

Sunny Components Inc,
Tuesday, Wednesday, Thursday, and Friday: 10:00 am—6:00 pm; Saturday: 10:00 am-4 pm; closed on Sunday and Monday.

1370 E Cypress St Ste D, E Covina CA-91724 USA
Tel: 626-966-6259. Fax: 626-966-5467. Cell: 626-975-1353.
Email: [email protected].
Store Website: www.sunnyaudiovideo.com

 

 

Some of the finest products are built in America and Europe, combined with the finest service, know-how, and expert setup. From Electrical power to the finest Audio stands, electronics speakers, turntables, and streaming, we stock, install, and configure Roon and MQA.

Call us before purchasing if you have any questions. 
Local installation and delivery are available 
All cables, speakers, turntables, electronics available as packages. 
All credit card purchases will incur a 4% charge. 

We are offering an infrequent Pre-Preamplifier sale.
This is a two box Pre-Preamplifiernone other than Mark Levinson 
This is the No 52 ultimate reference by Mark Levinson. 

• Two-piece chassis with separate control box and analog box
• Dual Monaural construction and signal paths/routing
• AC regeneration circuitry
• 7 Analog inputs: 3 XLR and 4 RCA stereo input pairs
• Phono input with support for both MM and MC cartridges
• Rear-panel USB (A) connector for software updates

( We also have a 10 of 10 1 pair Mark Levinson No 53 Monaural amplifiers for sale ) 
You can purchase both the No 53 and the No 52 as a matched pair for $30,000.00 
We can add a new Brinkmann Bardo with a New 12 inch tonearm and a Acoustical systems Arhon cartridge for $47000.00
We can also add a EMM Labs MA-3 DAC/Streamer for $55000.00 as a package....
Add a Stenheim Alumine 3 Loudspeaker for $76000.00
                                     or 
Add a Stenheim Alumine 5 for $100,000
                              Many other options possible. 
 

 

Description	Reference Dual-Monaural PreaPreamplifier
quency Response	10Hz – 40kHz (±0.2dB)
Frequency Response (Phono)	±1dB (RIAA response)
Input Impedance	Input Impedance (line-level) 100k ohms -- Input Impedance (phono) Resistive 3.3Ω, 5.0Ω, 7.7Ω, 10Ω, 33Ω, 50Ω, 77Ω, 100Ω, 330Ω, 47kΩ, (user-selectable) Capacitive 50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 0.01μF (user-selectable)
Height	8.75" (22.2 cm) - Control = 3.25" (8.2 cm); Audio = 5.5" (14 cm)
Width	17.25" (43.8 cm)
Depth	13" (33 cm)
Weight	60 lb (27 kg) Control = 25 lb (11 kg); Audio = 35 lb (16 kg)
Phono Inputs	Input Overload (phono) >100mV @1kHz (40dB gain); >10mV @1kHz (60dB gain)
Communication and Control	Volume Control Range 80.0dB
Analog Audio Inputs	3 balanced (female XLR) stereo inputs; 4 single-ended (Mark Levinson-RCA) stereo inputs
Analog Audio Outputs	1 balanced (male XLR) stereo main output; 1 single-ended (Mark Levinson-RCA) stereo main output; 2 single-ended (Mark Levinson-RCA) stereo record outputs
Maximum Output Level	16V – balanced (XLR) connectors; 8V – unbalanced (RCA) connectors
Signal-to-Noise Ratio	Residual Noise < 120dB (20Hz – 20kHz, input terminated,balanced)
Gain	Gain (line-level stage) 0dB, +6dB, +12dB, or +18dB (user-selectable) -- Gain (phono stage) +40dB, +60dB @1kHz (user-selectable) -- Gain Resolution 1.0dB increments up to 23.0dB on display (–57dB to –80dB); 0.1dB increments above 23.0dB on display (0dB to –57dB)
Output Impedance	20 ohms – balanced (XLR) connectors; 10 ohms – unbalanced (RCA) connectors
Power Requirements	Operating Voltage 100V – 240VAC, 50Hz/60Hz

Audio Specifications

Description	Reference Dual-Monaural PreaPreamplifier
quency Response	10Hz – 40kHz (±0.2dB)
Frequency Response (Phono)	±1dB (RIAA response)
Input Impedance	Input Impedance (line-level) 100k ohms -- Input Impedance (phono) Resistive 3.3Ω, 5.0Ω, 7.7Ω, 10Ω, 33Ω, 50Ω, 77Ω, 100Ω, 330Ω, 47kΩ, (user-selectable) Capacitive 50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 0.01μF (user-selectable)
Height	8.75" (22.2 cm) - Control = 3.25" (8.2 cm); Audio = 5.5" (14 cm)
Width	17.25" (43.8 cm)
Depth	13" (33 cm)
Weight	60 lb (27 kg) Control = 25 lb (11 kg); Audio = 35 lb (16 kg)
Phono Inputs	Input Overload (phono) >100mV @1kHz (40dB gain); >10mV @1kHz (60dB gain)
Communication and Control	Volume Control Range 80.0dB
Analog Audio Inputs	3 balanced (female XLR) stereo inputs; 4 single-ended (Mark Levinson-RCA) stereo inputs
Analog Audio Outputs	1 balanced (male XLR) stereo main output; 1 single-ended (Mark Levinson-RCA) stereo main output; 2 single-ended (Mark Levinson-RCA) stereo record outputs
Maximum Output Level	16V – balanced (XLR) connectors; 8V – unbalanced (RCA) connectors
Signal-to-Noise Ratio	Residual Noise < 120dB (20Hz – 20kHz, input terminated,balanced)
Gain	Gain (line-level stage) 0dB, +6dB, +12dB, or +18dB (user-selectable) -- Gain (phono stage) +40dB, +60dB @1kHz (user-selectable) -- Gain Resolution 1.0dB increments up to 23.0dB on display (–57dB to –80dB); 0.1dB increments above 23.0dB on display (0dB to –57dB)
Output Impedance	20 ohms – balanced (XLR) connectors; 10 ohms – unbalanced (RCA) connectors
Power Requirements	Operating Voltage 100V – 240VAC, 50Hz/60Hz