Legacy Audio Mist Surround sound amazing Rosewood finish

Selling not a pair but 3 speaker set !!

Spec's on speakers below.

Handcrafted
Beneath the surface of MiST’s elegant exterior lies rigid MDF construction. Interlocking joinery maximizes the strength of the cabinet parts. Polyester fiberfill is selected for internal damping. A sharp rap on the enclosure will leave you with little more than bruised knuckles.
Each cabinet is impeccably finished on all exposed surfaces with select veneers. The exquisite finish is hand-rubbed several times to assure a patina at home with the most elegant decor.
Our Commitment
A great deal of forethought, love and satisfaction is instilled in each piece of Legacy workmanship. We take pride in getting to know many of our customers on a first name basis.
Your purchase of this product is backed by the renowned “Legacy Satisfaction Guarantee”.

MiST
MiST is a configurable rear channel loudspeaker system designed to accommodate any of the existing formats* such as DTS, DTS ES, Dolby Digital and Dolby Pro Logic.
MiST utilizes specialized drivers in its two side firing arrays.
Each array consists of a premium quality 5.25” KEVLAR composite driver and a 1” Ferro fluid cooled Titanium tweeter.
Unlike most wall mount speakers, MiST is internally equalized for on-wall placement. This results in a very smooth frequency response. Its specialized polar pattern prevents “glare” by reducing output by6 dB on axis, allowing a more heightened sense of ambience. The dynamic capabilities of MiST will show off the demanding range of today’s soundtracks.

System Type: Configurable 2-way bipolar array.
Dimensions: 11” W x 17 3/8” H x 7 1/4” D
Crossover Frequencies (Hz): 2.8k
Frequency Response: 79-25 kHz +/-3 dB
Sensitivity: 90 dB on axis with each array.
Impedance: 8 ohms/array, 4 ohms with inputs in parallel (jumpered) Weight: 24 lbs

At the rear of your MiST you will find a terminal plate housing jumpered pairs of five-way binding posts. Connect the output of the rear channel amplifier to the loudspeaker via the gold five-way binding posts provided. Dual banana plugs or gold spade lugs are recommended means of termination.
Be sure that you observe polarity when making the connections. The positive (+) terminal (red) of the amplifier should be connected to the positive terminal of the loudspeaker.
The negative (-) terminal (black) of the amplifier should be connected to the negative terminal of the loudspeaker.
Bi-Amping MiST
Because MiST is a configurable design, it may be driven as a progressively steered signal array. More specifically, one may wish to drive one input with a side signal and the other input with a side rear signal. This is useful in smaller spaces or in DSP controlled distribution.

A pair of MiST should be wall mounted approximately 6’ high and to the sides of the listener. An optional third MiST may be used as a center rear channel by mounting the unit behind the listener. Because MiST is actually two independent, opposite facing, side-firing arrays in one cabinet, it behaves as a bipolar system. When used behind the listener it may be powered by both the left and right rear channel inputs.
Though the MiST requires only one channel of amplification per unit to drive it when configured in the standard mode, separate input terminals for each array allow for future steering versatility.
Instructions for attaching bracket to wall
1. Selecting a mounting site.
Note: Try to find a site with a solid wood backing.
2. Using one of the brackets as a pattern, mark four holes on the wall, aligning the vertical holes with a stud location.
3. Drill four 1/8” (.32 cm) diameter holes as marked.
4. Fasten one bracket to the wall with four wood screws provided. (See Figure 1)