McIntosh MC206 McIntosh MC206 Six Channel Amplifier - Excellent Condition

This is a Mcintosh MC206 six-channel power amplifier (200wpc). I am the original owner and take very good care of all of my gear. It works perfectly with no issues whatsoever and is in excellent cosmetic condition. Both the glass and the case are in perfect condition with no scratches, dings, dents, etc.The unit just recently came back from Macintosh after a full check up. The amp comes with the owner’s manual, a multi-pin cable (for connecting to an MX132 or MX134), and will ship in its special double-box Macintosh shipping carton. I have a MX134 for sale as well and am willing to sell both in a package deal.

I will be happy to ship anywhere in the world, but the buyer must pay all shipping/insurance/customs fees. Buyer agrees to add 4% if paying via Paypal. Feel free to contact me with any questions. SERIOUS INQUIRIES ONLY PLEASE. NO LOWBALL OFFERS. 

From Mcintosh Labs:

MC206 Six-Channel 
Power Amplifier 
Six-Channel Power Amplifier for home theater systems 
Single-cable connection to MX132 and MX134 A/V 
Control Center + Processor 
6 x 200 watts (4 ohms) or 6 x 120 watts (8 ohms) 
Wide power bandwidth 
Ultra-low distortion 
Exclusive McIntosh Power Assurance System: 
Power Guard® clipping protection 
Sentry Monitor® current protection 
Thermal Cutout 
Turn-On Delay 
Soft Start inrush protection 
Illuminated peak-responding wattmeters with four-position 
monitoring switch and auto mode selection with MX132 
and MX134 
Low-noise toroid power transformer 
Remote power control 
Gold-plated high-current output terminals 
Fanless convection cooling 
Modular construction with steel chassis 
Glass front panel with illuminated nomenclature

RMS Power Output 
200 watts (4) or 120 watts (8) min. 
sine wave continuous avg. output per 
channel with all channels operating: 
Output Load Impedance 
8 or 4 ohms 
Rated Power Band 
20Hz to 20kHz 
Peak Output Current 
> 25 amperes 
Total Harmonic Distortion 
0.005% max. at any level from 250mW 
to rated output from 20Hz to 20kHzChambers Street, Binghamton, New York 13903 
Input Impedance 
10k ohms 
Power Guard® 
Clipping is prevented and THD 
does not exceed 2% with up to 
14dB overdrive at 1kHz 
Power Requirements 
120V 50/60Hz, 10.5A 
Dimensions (h x w x d) 
inch: 7.062 x 17.5 x 20 
cm: 17.9 x 44.5 x 50.8 
Weight 
53 lbs. (24.1kg) net 
72 lbs. (32.7kg) boxed 
Intermodulation Distortion 
0.005% maximum if instantaneous peak 
output does not exceed twice the output 
power rating 
Dynamic Headroom 
1.6dB 
Frequency Response 
20Hz to 20kHz, +0 / -0.25dB 
10Hz to 100kHz, +0 / -3.0dB 
Input Sensitivity 
1.0V (2.0V at gain control center detent) 
A-Weighted Signal-to-Noise Ratio 
113dB below rated output 
Wide Band Damping Factor 
200 (8 ohms); 100 (4 ohms)