Arcam AVR-400

Here is an Arcam AVR-400 receiver. The unit was purchased new 9/12 from an authorized dealer. The receiver is being used for a 3.1 setup.

There is a light diagonal scratch across one corner, so faint that I was unable to capture in a photo. Other then that there are no other scratches, dings or dents. The AVR is fully functional.. 

The reason for the sale is that I’m moving on to powered speaker system.

See below for a list of specs and features.

The receiver has original box, manual and all accessories.and

Local pick up is welcome, buyer responsible for actual shipping costs and PayPal fees (3%) if used, friends and family option is preferred.

Thanks for viewing.

Technical Specifications:

Video Inputs
HDMI x5
Component video x3
S-Video x4
Composite video x4

Video Outputs
HDMI x1 - includes audio (see below)
Component video x1
Composite video (Zone 2) x1

Audio Inputs
HDMI x5
Coaxial Digital x4
Optical Digital x2
Line inputs (RCA/Phono) x6
Multichannel (8x RCA/Phono) x1
Front line in/digital optical x1 (3.5mm jack)
USB x1
Ethernet x1

Audio Outputs
HDMI x1 (including ARC - Audio Return Channel)
Pre-amp out (8x RCA/Phono) x1
Pre-amp out (Zone 2 RCA/Phono) x1
Headphones output (3.5mm jack) x1

Custom Install Connections
RS232 control input x1
iPod control port (for irDock)
12V trigger x2 (Zone 1 & 2, 12V, 100mA)
IR inputs x2 (Zone 1 & 2)

Supported Audio Decoding / Processing
Dolby TrueHD, Dolby Digital Plus
Dolby Digital EX
Dolby Digital
Dolby Volume
DTS-HD Master Audio
DTS, DTS96/24
DTS-ES (matrix & discrete)
Dolby Pro Logic IIx Movie, Music, Game
Dolby Pro Logic
DTS Neo:6 Cinema, Music

Supported USB/Ethernet Audio Formats
MP3
WMA
FLAC
AAC with DRM10 support

Analogue Inputs
Input sensitivity 1V-4V (user adjustable)
Input impedance 47Kohm
Signal to noise ratio (CCIR, 65W) -100dB

Power Amplifier (20Hz-20kHz at 0.1% THD)
Output power 130W p/c (2 channels driven)
Output power 90W p/c (7 channels driven)
THD at 3dB below max power < 0.02%
Residual noise & hum < 0.3mV

Pre-amplifier Output
Maximum level 6V RMS
Output impedance <50ohm
THD+N (20Hz-20kHz) -100dB

Analogue Video
Component video input signal/noise 85dB
Composite video input signal/noise 70dB

Headphones Output
Max output level 4V p-p
Output impedance <5ohm

Power Consupmtion
Maximum 1.5KW
Idle (typical) 100W
Standby <0.5W

Supplied Accessories
CR102 Eight page backlit learning remote
Setup microphone
Owners manual
Power cord
DAB/FM/AM Radio antennas

Weights
15.5Kg (34.2lbs) net
20.0Kg (44.1lbs) packed
Dimensions
Width: 435mm (17.3”)
Depth: 425mm (16.7”)
Height: 172mm (6.7”)