Rotel RSX-1067 silver 7ch 100wpc all driven

Rotel RSX-1067 7 channels 100/200 watts per channel. This is in perfect shape - not a single scratch/smudge on it anywhere. The wire you see in the photos is for remote control, it has been removed.

The unit has been firmware upgraded to support 176.4kHz and 192kHz signals.

This comes with the upgraded universal rr-1060 remote - this alone is selling for $150 new on ebay. There is a small scratch on the remote and one pixel is not working - works perfectly.

100 Watts a channel with ALL 7 channels driven. 200wpc at 4ohm. Not like other receivers that can only power 100 watts per channel on one speaker. This this is a powerhouse. I have original box/manuals/remote. It is currently powering a Martin Logan home theater setup which takes some serious power to run.

Dolby Digital EX, and DTS-ES. Come over for a kick ass demo if local.

The cord in the picture is for remote control of the unit. Email if you want more pictures. Paypal adds 3%

Specifications

Audio

Continuous Amplifier Power: 100 watts/ch (20-20kHz, Number of channels driven: 7
Continuous Amplifier Power: 120 watts/ch (1kHz, Total Harmonic Distortion: Intermodulation Distortion: (60Hz:7kHz) Frequency Responses =
Analog Bypass: 10Hz - 120KHz, ±3 dB
Digital Input: 10 Hz - 95KHz, ± 3dB
Signal to Noise Ratio (IHF A-weighted) =
Analog Bypass: 95dB
Digital Input 0 dBFs (Dolby Digital, dts): 92dB
Input Sensitivity/Impedance: Line Level: 200 mV/100K ohms
Contour (LF / HF): ±6dB at 50Hz / 15KHz
Preamp Output Level/Impedance: 1.0 V / 1K ohm
Decodable Digital Input Signal : Dolby Digital, Dolby Digital EX, DTS, DTS ES, DTS96/24, LPCM (up to 192kHz), HDCD, MP3, MPEG Multichannel

Video

Frequency Response: 3Hz - 10MHz, ± 3dB (Composite, S-Video)
3Hz - 100MHz, ± 3dB (Component Video)
Signal to Noise Ratio: 45dB
Input Impedance: 75 ohms
Output Impedance: 75 ohms
Output Level: 1.0 Volt

FM Tuner

Usable Sensitivity: 14.2 dBf
Signal to Noise Ratio (at 65 dBf): 70 dBf
Harmonic Distortion (at 65 dBf): 0.03%
Stereo Separation (1 kHz): 45 dB
Output level : 1 V
Antenna Input , 75 ohms unbalanced

General

Power Consumption: 990 watts, Idling power 130 watts, Standby 19 watts
Power Requirements (AC): 115 volts, 60 Hz (USA version); 230 volts, 50 Hz (CE version)
Dimensions (W x H x D) : 433 x 189 x 400 mm; 171/2 x 7 1/2 x 15 3/8" Weight (net): 54 lbs.
Front Panel Height (for rack mount) :176 mm

Original Price: $2,199