Parasound Halo Integrated 160 Watt Stereo Integrated Power Amplifier in Black - NEW!

The Parasound Halo Integrated Amplifier is in black and new / sealed box.  

Preamp Section Features

• Latest generation ESS Sabre32 Reference DAC (ES9018K2M)
• Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
• Native and DoP DSD decoding (Drivers for ASIO or WASAPI)
• Coax and optical accept PCM up to 192kHz/24-bit
• Analog bass management with high & low pass crossovers
• Home theater bypass input for surround sound integration
• Front panel subwoofer level control
• Dedicated high current headphone amplifier (TI TPA6120)
• Phono input for MM & MC with 100 ohmsor 47k ohms load
• Front panel Aux input with automatic +12 dB gain stage
• 5 pairs RCA line level Analog inputs
• 1 pair XLR balanced Analog input
• Balanced XLR and RCA left and right preamp outputs
• 1 balanced XLR and 2 RCA subwoofer outputs
• Bass & treble controls with relay bypass from remote or front panel
• Rear panel IR input and IR loop output jacks
• 12 Volt input and output to triggers
• Premium motor-driven Alps potentiometer volume control
• Back-lit remote control with discrete buttons
• 0.5w standby power consumption meets Energy Star & EU specs

Power Amp Section Features

• 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
• 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
• Power amp circuit topology designed by legendary John Curl
• Direct amplifier input to bypass preamp section
• High bias class A/AB operation
• Oversized shielded toroid power transformer
• Dual-mono power supply and power amplifier
• 40,000uF power supply filter capacitance
• Matched JFET input stages and MOSFET driver stages
• 12 high voltage/high current bipolar output transistors
• Heavy-duty 24k gold-plated 5-way speaker binding posts
• Over temp and short circuit relay protection

Specifications

• Frequency Response: 10 Hz - 100 kHz, +0/-3 dB
• Total Harmonic Distortion: < 0.01 %
• Power Output RMS, All Channels Driven (20 Hz - 20 kHz): 160 watts x 2 @ 8 ohms; 240 watts x 2 @ 4 ohms
• 45 amps of current per channel
• Input Impedance: Unbalanced: 24k ohms; Balanced: 100k ohms per leg
• Output Impedance: Unbalanced: 100 ohms; Balanced: 470 ohms per leg
• Hi & Low Pass Crossover Slope: 12 dB / Oct
• XLR Pin Identification: 1 = Ground (Shield), 2 = Positive, 3 = Negative (Return)
• Power Requirements: Standby: 0.5 Watts; Power On: 70 Watts; Maximum: 750 Watts; 110-130 VAC 60 Hz or 220-260 VAC 50 Hz (AC mains voltage is set on rear panel)
• Dimensions: 17-1/4" wide, 5-7/8" high with feet (5-1/4" high without feet), 16" deep
• Weight: 33 lb.

Thanks for looking, please let us know if you have any questions.   

Mike 
Audio Archon 
847-687-4800