McIntosh MC-352

Specifications

Power Output Stereo 350 watts into 2, 4 or 8 ohm loads is the minimum sine wave continuous average power output per channel both channels operating.

Power Output Mono Parallel 700 watts into 1, 2 or 4 ohm loads is the minimum sine wave continuous average power output. Output Load Impedance 2, 4 or 8 ohms (Stereo Mode) 1, 2 or 4 ohms (Mono Mode)

Rated Power Band 20Hz to 20,000Hz

Dynamic Headroom 2.1dB

Frequency Response +0, -0.25dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 100,000Hz

Total Harmonic Distortion 0.005% maximum at any power level from 250 milliwatts to rated power per channel from 20Hz to 20,000Hz, all channels operating.

Intermodulation Distortion 0.005% maximum if instantaneous peak output per channel does not exceed twice the rated output with all channels operating for any combination of frequencies from 20Hz to 20,000Hz.

Signal To Noise Ratio (A Weighted) 85dB Unbalanced (116dB below rated output) 115dB Balanced (124dB below rated output)

Sensitivity 1.9 Volts Unbalanced Input 3.8 Volts Balanced Input

Input Impedance 20,000 ohms Unbalanced 40,000 ohms Balanced

Damping Factor Greater than 40

Power Requirements 100 Volts, 50/60Hz at 14.5 amps 110 Volts, 50/60Hz at 13.0 amps 120 Volts, 50/60Hz at 12.0 amps 220 Volts, 50/60Hz at 6.50 amps 230 Volts, 50/60Hz at 6.25 amps 240 Volts, 50/60Hz at 6.00 amps NOTE: Refer to the rear panel of the MC352 for the correct voltage.

Dimensions Front Panel: 17.50 inches (44.5cm) wide, 8.89 inches (22.58cm) high. Depth behind front mounting panel is 21 inches (53.3cm) including clearance for connectors. Panel clearance required in front of mounting panel is 1.125 inches (2.9cm).

Weight 105 pounds (47.63Kg) net, 138 pounds (63Kg) in shipping carton