McIntosh MA-6500 Integrated Amplifier

Functionally perfect but there are some visual blems.  The biggest is a little broken glass in the upper right corner.  See picture.  No remote, no power cord, no brochure.   Features 2 x 120/200/250 watts (8/4/2 ohms) Wide power bandwidth with ultra-low distortion Exclusive McIntosh Power Assurance System:  Power Guard® clipping protection Sentry Monitor® current protection Thermal Cutout Turn-On Delay Soft Start inrush protection Illuminated peak-responding meters Silent electromagnetic switching Precision-trimmed volume control with digital readout Loudness compensation Exclusive McIntosh tone controls 6 source selections including phono Switching for 2 pairs of speakers Accommodates more sources with McIntosh MVS3 A/V Selector Control data output for source components Remote power control Remote operation of lights, screens, and drapes with McIntosh  HC1 Home Controller Power and mute indications shown on multizone keypads  and sensors Electronically regulated power supply with double-shielded transformer Gold-plated input and output jacks Fanless convection cooling Modular construction with steel chassis Glass front panel with illuminated nomenclature Infrared remote control Connector for external IR sensor or keypad controller
Specs -RMS Power Output (8/4/2 ohms) - 120/200/250W min. sine wave continuous average power output per channel from 20Hz to 20kHz with both channels operating -Output Load Impedance - 2, 4, or 8 ohms -Rated Power Band - 20Hz to 20kHz -Total Harmonic Distortion - 0.005% max. at any level from 250 milliwatts to rated power per channel from 20Hz to 20kHz withall channels operating -Intermodulation Distortion- 0.005% max. if instantaneous peak power output does not exceed 400W per channel -S/N Ratio (A-Weighted) Power amp: 110dB below rated output High level: 100dB below rated output (90dB IHF) Phono: 90dB below 10mV input (84dB IHF) -Damping Factor - 230 (8 ohms) 120 (4 ohms) 60 (2 ohms) -Input Impedance- High level: 22k ohms, Phono: 47k ohms, 65pf, Main in: 20k ohms -Voltage Gain - High level to tape: 0dB.  High level to main: 20dB -Dynamic Headroom - 2.4dB -Frequency Response -20Hz to 20kHz, +0 / -0.5dB -Maximum Voltage Output - 8V from 20Hz to 20kHz -Input Sensitivity - High level: 250mV for 2.5V rated output (50mV IHF), Phono: 2.5mV for 2.5V rated output (0.5mV IHF) -Main in: 2.5V for rated output -Maximum Input Signal - High level: 10V, Phono: 90mV -Power Guard® Clipping is prevented and THD does not exceed 2% with up to 14dB overdrive at 1kHz -Tone Controls - Bass and treble: ±12dB -Power Requirements - 120V 50/60Hz, 4A -Dimensions (h x w x d) - : 5.375" x 17.5" x 18.125" includes clearance for connectors, knob clearance: 1.125"  -Weight - 41 lbs. (18.6kg) net, 60 lbs. (27.3kg) shipping