8' Silver 7 AWG Speaker Cables Shotgun configuration COPPER FUREZ TERMINATION

Item Description
 8’ Silver 7 AWG Speaker Cables Shotgun configuration 
Performance approaching the very best and most expensive audio cables on the market, for a fraction of the price. Well below what audiophiles normally expect to pay for superbly engineered and hand crafted components. Best Value of any cables available.

Furez copper bananas and spades combo  
Furez Red copper Spades/Bananas: Optimized Contact Pressure: The TST "Tensioned Split Tube" Banana Plugs feature a solid color coded silicone elastomeric tensioning element. This tensioning element provides the spring force required to enable the use of soft high conductivity copper.  Traditional banana plug designs rely on the inherent spring force of harder low conductivity copper alloys to provide the required contact pressure to make the banana plug connection.  Unfortunately, the copper alloys that have sufficient inherent spring tension also suffer from poor conductivity.  The simple and effective design approach of the Tensioned Split Tube (TST) Banana allows our connector to be constructed of C14500 Tellurium 93% IACS Copper. Maximized Signal Conductivity: 
The Sized Right, Maximized Contact Area and Optimized Contact Pressure features of the TST Banana plugs are significant factors in maximizing signal conductivity but there are other significant factors to consider as well.  • Solid Single Piece Conductive Path: The Furez line of banana speaker wire connectors are designed to have a single continuous conductive path from the wire to the end of the plug. This eliminates the added contact resistance associated with the common multi-piece design.  • Truly High Conductive Core Materials:  The Furez TST Bananas utilize C14500 Tellurium 93% IACS Copper and the SP series spades utilize C11000 100% IACS Copper which are the highest conductivity coppers available for their respective designs.
Materials like C36000 Brass, C54400 Phosphor Bronze, C17500 Beryllium Copper are the typical copper alloys used and all have low conductivities in the range of 19% to 40% IACS. 
Bare Copper Non-Plated Connectors: The use of bare non-plated copper connectors provides the natural high conductivity connection of a bare speaker cable termination without the safety hazard of shorting wire strands. Bare electronic grade copper will not turn green or oxidize heavily under normal conditions and some simple handling practices will keep you copper looking and performing quite well for many years.


4 Runs of 10 AWG Sliver Plated American Mil-spec Aircraft wire per channel
Conductors: 
Silver-plated copper with 40 microinches minimum coating thickness. Insulation Material: Polytetrafluoroethylene (PTFE This heavy-wall wire, rated at 1,000 volts rms or 3,000 volts DC, saves both size and weight compared with many other insulated wires of the same rating.  Suitable for Broad frequency use at elevated temperatures in high-reliability programs where electrical and thermal stability are important.   Hard shell foam lined case.   Custom lengths, terminations and jumpers available      These are the best cables I have heard at any price, I sold my Kimber selects to run these,     12.95 Flat rate shipping