Audio ResearchGSpreAudio Research GSpre Line Stage/Phono Stage, Store DemoThe GSPre is both a line stage and phono stage, with programmable functionality and flexibility, making it the perfect solution to adapt and grow in your system. The phono stage is no mere aftertho...8995.00

Audio Research GSpre Line Stage/Phono Stage, Store Demo [Expired]


no longer for sale


The GSPre is both a line stage and phono stage, with programmable functionality and flexibility, making it the perfect solution to adapt and grow in your system. The phono stage is no mere afterthought, but a separate, vacuum tube-powered circuit providing enough gain for a variety of phono cartridges. When listening conditions require a more personal experience, the GSPre also has a headphone amplifier capable of driving a range of headphone impedances. The front panel layout is designed to simply and clearly display all functions and information, and integrates beautifully with the rest of the chassis and the G-Series amplifier.

About this unit
Superb condition store demo Audio Research GSPre Linestage / Phono Stage. Unit has a silver faceplate and silver sides, with a black body and black handles. Unit comes in original box and packing with manual, remote control, and power cord.

Unit is rated 8/10 for light use and minor cosmetic wear consistent with use. There is one small nick on the rear-right and the rear-right corner (see photos).

Warranty
Manufacturer’s warranty limited to the balance of original remaining warranty.

Specifications
FREQUENCY RESPONSE
line: +/-.3dB 2Hz to 80kHz; : -3dB 0.8Hz to 220KHz
Phono: +/- 0.1dB of RIAA 10Hz to 20KHz, +/-0.4dB 5Hz to 80KHz
Headphone: +/-0.05dB 20Hz to 20KHz; : -3dB 0.8Hz to 220KHz

THD+N @ 1KHZ
line: <.002% at 2V RMS, Bal output
Phono: <.005% at 3V RMS output, to Record output
Headphone: <.009% at 1V RMS output

GAIN @ 1KHZ
line: 13.8 dB, Processor: 0dB
Phono: 58dB @ 1KHz to Record output
Headphone: 11.3dB

NOISE (A-WEIGHTED)
line: <-101dBV volume at max.
Phono: <-77dBV to Record output
Headphone: <-88dBV volume at max.

CHANNEL SEPARATION @ 1KHZ
line: > 75dB Balanced output
Phono: >70dB to Record output
Headphone: >60dB

SIGNAL TO NOISE RATIO @ 1KHZ, A-WEIGHTED
line: >125dB Balanced output
Phono: >94dB to Record output
Headphone: >110dB

INPUT IMPEDANCE
150K ohms Balanced, 75K ohms SE; Phono impedance programmable (100, 200, 500, 1000 or 47K ohms w/200pf unbalanced)

OUTPUT IMPEDANCE @ 1KHZ
500 ohms Balanced, 250 ohms SE; <.05 ohms Headphone SE.

MAXIMUM INPUT
line: 12V RMS Balanced, 6.0V RMS SE.
Phono: 11mV RMS at 1KHz.

RATED OUTPUT
line: 2V RMS (1V RMS SE) into 200K ohms balanced load (maximum balanced output capability is 15V RMS at less than .5% THD+N at 1KHz.)
Phono: 0.5V RMS into 200K load, Max output same as Line stage.
Headphone: 6V RMS maximum into 30 to 300 ohm load.

CONTROLS
Volume, Input Selector.
5 Push Buttons: Power, Mute, SPKR Off, Mono, Menu.
Rear; RS-232 control, Remote IR input & Remote Trigger out.

POWER SUPPLIES
Electronically regulated low and high voltage supplies.
Automatic 45 sec. warm-up & brown-out mute.
Line regulation better than .01%.

TUBE COMPLEMENT
(6) 6H30P dual triodes.

POWER REQUIREMENTS
100-125VAC 60HZ (200-250VAC 50/60Hz) 105 Watts.
Standby: 1.5 Watts.

DIMENSIONS (WHD)
19" W x 7 3/4" H x 17 1/4" D

WEIGHT
25 lbs

Additional Information
Please call 734.662.3595 and ask for Richard or Larry if you have any questions about this product. We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.

For a complete listing of all of our specials, please visit: https://www.paragonsns.com/product-category/preowned-specials/

paragonss member since April 1999

 
Paragon Sight and Sound  Verified Dealer
Last 12 months
All-time2436100.0%
Items from this seller