Crestron DM-DA4-4K-C

1 HDMI in 
1 HDMI out 4 DM out 
Power over DM with seperate power supply

Converts and splits a single 4K60 HDMI® signal
to feed four separate DM 8G+® or HDBaseT® receivers. Includes one HDMI output
for cascading multiple units or feeding a local display or audio processor.

The
DM-DA4-4K-C is a DigitalMedia™ accessory
that converts and splits a single 4K60 HDMI® signal to feed four separate DM 8G+® or HDBaseT®
receivers. A single HDMI output is included to pass the input through to a
local display, audio processor, switcher, or another DM-DA4-4K-C. Video and
audio are passed from the input to all five outputs simultaneously without any
change or degradation.

PoDM+ and
HDBaseT PoE+ power sourcing is enabled at all four DM® ports by adding a PoDM
power supply (model PW-4830DUS or DM-PSU-3X8-RPS,
sold separately). This enables certain DM receivers and HDBaseT devices to
receive power through the CATx cable, eliminating the need for a separate power
supply at each endpoint location.[1]

A Gigabit
Ethernet port is included to provide a single-point LAN connection for all connected
devices, including DM receivers and HDBaseT devices. Gigabit connectivity at
the DM-DA4-4K-C ensures a full 100 megabit connection for each connected device.[2]

HDCP is
globally selectable on the DM-DA4-4K-C to support version 2.2, 1.4, or none. EDID
functionality is configurable to either pass EDID to the input from the device
connected to the first DM output port, or to use a pre-fined default EDID
optimized for 1080p60. CEC signals are not passed through the DM-DA4-4K-C,
although most DM receivers can support CEC through integration with a control system via
Ethernet.[3]

One or two
DM-DA4-4K-C units can be rack-mounted in a single rack space using the ST-RMKrack
mount kit. Installation beneath a table or counter is enabled using the UTK-1U-HALFunder-table
mounting kit. Both mounting kits are sold separately.