Call me at 770-667-5633 or email firstname.lastname@example.org with questions.
Call to discuss this new large power amp as well as our pricing.
The JD-1000P is available in both black and silver finish. We currently have black available. More silvers in 45 days.
I now have available the new Jolida JD-1000P power amplifier. This basic EL 34 based tube power amp is an upgrade to the amp used in the JD-1000RC integrated amp. It adds Ultra Fast HEXFRED's in the power supply as well as custom Jolida capacitors and ceramic composition resistors.
There are 4 EL-34 tubes per channel to produce a rich warm sonics that EL-34's are famous for. We can also order the amp set up for 6550/KT88 tubes. In this configuration it does 120 watts per channel and has the tighter more controlled bass of the 6550/KT88 tube along with its additional detail and linearity.
They do about 200 watts in mono so a pair at under $3500.00 is 200 watts per channel.
The 1000P has both XLR balanced inputs as well as single ended RCA inputs to work with any preamp. It uses custom wound Audio Transformers with a core of German grain oriented silicon steel. This is a 15th generation proprietary Jolida design. The secondary can be configured for a 4 ohm or 8 ohm speaker load. It uses gold plated RCA input jacks, audiophile grade carbon composite grid resistors, HEXFRED high speed soft recovery diodes and poly tin coupling capacitors. The EZ bias system uses LED's so no meter is required.
This is a big powerful tube amp that will run virtually any speaker that you might have. I have even seen it do a great job on the big MBL's that say they need 300 watts to sound good.
I know of no other hi power tube amp in the $2000.00 price range that will do what the JD-1000P is capable of.
The rear has RCA and XLR inputs as well as 4 ohm, 8 ohm and ground speaker posts.
We accept Visa, MasterCard & money orders. Read our AudiogoN #1 rated feedback and then call 770-667-5633 with questions or to order.
International orders are paid with bank wire transfers
Specs from website:
Maximum Power Output: 150 W per channel @ 8 ohms, 1KHz
Rated Output Power: 100 W per channel @ 8 ohms, 25Hz-70KHz
Frequency Response: (at 1 watt into 8 ohms) 8Hz-130KHz +1dB
Bandwidth: 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz
Distortion THD: Less than 1% @ 100W output, 28Hz-15KHz
Circuit Type: Ultra Linear, Class AB
Input Impedance: 100Kohms
Input Sensitivity: 1.2 V @ 1KHz & 8 ohms for 100-watts out
Output Impedance: 4 ohms and 8 ohms
Negative Feedback: Less than 5 dB
Noise and Hum: 85dB below rated output
4 pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.
Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50 Hz option)
Dimensions: 17 1/8" w x 16" d x 9 7/16" h
Weight: 70 pounds net, approximately 75 pounds packaged
Warranty: Two year limited parts & labor. One year or 3000 hours whichever comes first on Jolida Tubes.
Bias Settings: 400 millivolts + 40 mV
Fuse: 110-120 VAC, 6.3 Amp Fast Blow; 200-240 VAC, 3 Amp Fast Blow
Acoustic Zen, Audio Space tube electronics, Bob Carver tube amps, Creek, Denon, Emerald Physics, Epos, ERA, Furutech ADL, Gallo, Gini Systems, Graham Slee, Jolida, LSA amps and speakers, Marantz Reference, Modwright, Mordaunt Short Loudspeakers, Music Hall, Peachtree Audio, Project, PS Audio, PurePower AVPS, Quad, Raysonic, Rolls Bellari, Silverline Audio, SONOS, Spatial Computer, Spread Spectrum Technologies, VMPS loudspeakers, WADIA, Wireworld, Wyred 4 Sound, Wywires.
Sales policies on our website at www.underwoodhifi.com